Used Adk 125 for sale (3,749)

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Dkodpjzqux Tofx Apwjr Cannot be tested. Collection only.

Condition: like new (used), functionality: fully functional, Exhibition machine Dkodpfxjzrnqls Apwer For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Dkedpfszqapdjx Apwor Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end.

Condition: not inspected (used), Year of construction: 1997, operating hours: 145,298 h, functionality: unexamined, machine/vehicle number: 31378, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Dkodpfx Apezqabmewor Weight approximately 9000 kg.

Condition: excellent (used), Year of construction: 1999, X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Main spindle: Speed range – main spindle, max. 12,000 rpm Drive power – main spindle: 15 / 10 kW Table surface area: 1,500 x 1,050 mm Number of tool positions: 30 Dkedpfx Apsgypabower

Condition: good (used), Load capacity: 125 kg Outrigger length: 3200 mm Working radius: 2600 mm Dkjdpjixl U Tofx Apwor Overall height: 3300 mm

Condition: good (used), Arm design: 270 mm Dedpfx Ajpy Dy Eepwjkr Power: 125 kVA

Condition: good (used), Total height: 3300 mm Dsdpfx Apstxyx Njwskr Boom height: 3100 mm Boom length: 3650 mm Usable working length: 3150 mm Load capacity: 125 kg

Condition: repair required (used), Year of construction: 2006, Manufacturer: BT Tip: SPE 125 L Load capacity: 1250 kg Dodom Twafopfx Apwekr Fork length: 1600 mm Year of manufacture: 2006 Without charger Battery must be replaced/repaired!!!

Condition: good (used), Total height: 3300 mm Boom height: 3100 mm Dkjdpfx Apjtxya Hjwsr Boom length: 3250 mm Usable working length: 2400 mm Load capacity: 125 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. Dkodpfx Ajzk D Nujpwor • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core • Interface: Euromap 12 robot interface • Outer length: 745 mm • Outer width: 770 mm

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth Dodpfxey H Akrs Apwekr External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2018, functionality: fully functional, operating hours: 3,915 h, Hydraulic baling press, model JM-125/75, manufactured in 2018. Designed for the pressing and compaction of ferrous scrap and other metallic waste, providing high productivity and optimal density of the resulting bales. Dkodpfxozdfzyo Apwer The machine is constructed with a high-strength steel structure and equipped with a high-performance hydraulic system, ensuring reliability and durability even under intensive working conditions. Main features: Type: Stationary hydraulic baling press Pressing force: 125 tons High-performance hydraulic system Designed for the processing of scrap and metallic waste Robust construction for continuous industrial use Easy access for maintenance and operation This press is an efficient solution for recycling centers, metal recyclers, and facilities dedicated to the management of industrial waste.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Dkedpfx Aezkpxnspwsr Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm Djdpfxet Hwuis Apwokr total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg Dkjdpfegyfmajx Apwsr • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: excellent (used), Offer includes: Busch stack turner from 2015, in very good condition, immediately available. Djdpfxjzkwtyo Apwokr

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Dodpezimcbjfx Apwskr Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. Dkedszq Ax Ujpfx Apwor The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: ready for operation (used), L & Z Lathe NARDINI MS 125 E incl. collet chuck / quick-change tool holder -Center height above bed 150mm -Swinging diameter over cross slide 140mm -Distance between centers 500mm -Bar capacity 34mm Dkedpfxjzpg Uqs Apwer -Spindle speeds 50 - 2500 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Collet chuck - quick-change tool holder, type 173 E incl. 16 x collets -Multifix with inserts -Change gears -Tool cabinet with various tools -Machine feet -Chip guard -Drill chuck & live center -Work light -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 950kg Errors and omissions excepted.

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Djdpoyzhqysfx Apwekr

Condition: excellent (used), 460 USED Kemper Spiral mixer. TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. EXTERNAL DIMENSIONS (in cm) Dsdpfx Aezlrv Eepwekr - W: 140, - L: 85, - H: 148. Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), 459 USED Kemper Spiral mixer. TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. EXTERNAL DIMENSIONS (in cm) - W: 140, - L: 85, - H: 148. Dkjdpfx Apozlrtdjwer Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), 458 USED Kemper Spiral mixer. TECHNICAL DATA: - Flour capacity: 125 kg, - Dough capacity: 160 kg, Dksdszlrnzspfx Apwsr - 2 speeds, - Power: 5.5 - 8.5 kW, 380 V, 3 phase. EXTERNAL DIMENSIONS (in cm) - W: 140, - L: 85, - H: 148. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1999, Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details: Manufacturer: Transnorm Type: Belt Curve 125° right TS 1500-100 Curved belt conveyor Year of manufacture: 2001 Angle: 125° Running direction: right inner radius (IR): 600 mm belt width (GB): 600 mm Speed: please contact, motor not yet mounted Belt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Dkjdpfx Aek Abt Ejpwer Scope of delivery: without supports & sideguide (please inquire if required) Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik