Used Bale Shredder for sale (1,388)

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 196 1040, MORBARK WH3000XP chipper from 2022 in good condition. Serial number 196 1040. Djdpfx Asx Tp Hyefnoun

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Dodpfex Tp Iqsx Afnsun

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Year of manufacture: 2025 Operating hours: Dusdpoyg Hw Iofx Afnon

Condition: used, Year of construction: 2015, operating hours: 9,800 h, functionality: fully functional, EQUIPMENT DETAILS: Model: DW3060 Rotor: 21 teeth/bolted hammers ENGINE: MTU (Mercedes Benz) 450 HP Dodpfx Aoyha S Iofnoun Chassis: 3 axles with tandem wheels Hydraulic front support Remote control Auto-feed Rubber discharge belt Year of manufacture: 2015 Operating hours: 9800 h Registration number: 67.04.152-1

Condition: used, Year of construction: 2015, operating hours: 4,700 h, functionality: fully functional, TECHNICAL DATA OF THE MACHINE: Dusdpfxeyha T Ss Afnen Year: 2015 Operating hours: 4700 h Extras: Magnet for metals

Condition: good (used), Year of construction: 1992, functionality: fully functional, Single-shaft shredder, weight approx. 1700 kg, 11 kW, opening 550 / 900 mm, four-sided cutting crowns, slow-speed unit with hydraulic push floor, machine dimensions 2200 x 1000 mm, good condition. Price ex location. Transport available at extra cost! Dodpfx Asybbbqsfnoun

Condition: excellent (used), Year of construction: 2023, operating hours: 1,800 h, functionality: fully functional, Doppstad AK 640/K Year of manufacture: 2023 1800 operating hours First owner Spraying system Magnetic separator Price: €425,000.00 Dusdpsx Apzaofx Afnsn Leasing available until 09/2028, can be taken over.

Condition: excellent (used), Year of construction: 2007, operating hours: 9,300 h, functionality: fully functional, Shredder Doppstadt DW3060 Year of manufacture: 2007 Magnet over the conveyor belt. Dujdpox Ap Aqjfx Afnsn Operating hours: 9300 mth Price: 59,000 EUR

Condition: good (used), Year of construction: 1999, pressing force: 54 t, input voltage: 400 V, power: 4 kW (5.44 HP), input frequency: 50 Hz, Specifications: – Brand: HSM – Model: 500.1 VL – Year of manufacture: 1999 – Pressing force: 54 tons – Voltage: 400 V – Frequency: 50 Hz – Power: 4 kW – Serial number: 200100252 The machine is located in Zaandam (Netherlands). Inspection and testing under power possible by appointment. Dedoygl H Uspfx Afneun Transport cannot be arranged by us. The machine was left behind when we purchased our company premises and was previously used by the former owner for cardboard/paper. We have not made structural use of the press ourselves. The press is complete, operational, and immediately ready for use. Just connect and operate. Errors in the description expressly reserved.

Condition: used, Double-shaft shredder Drive 37.50 KW Dedpfx Aexgtcvjfneun

Condition: used, Opening: approx. 1600 x 1600 mm Dedpfx Afjxgtdaensun Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Djdpfx Ajyhzhzjfnjun Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems Dujdjyhzhuepfx Afnsn

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: Duedoyhzhnspfx Afnjn (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Djdpewnx Uijfx Afnoun Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: used, Year of construction: 2020, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. Dsdoxm T I Sopfx Afnoun This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us.

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Duedpfx Ajw R Ranjfnen Colour: Textured paint, RAL 7035 light grey

Condition: new, Year of construction: 2025, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. Duedpsxlzkrofx Afnen If you have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2017, operating hours: 433 h, functionality: fully functional, power: 35.3 kW (47.99 HP), fuel type: diesel, fuel: diesel, VERMEER BC-190 XL Chipper - Wood Chipper - Brushwood Chipper Duodoyhpw Hspfx Afnon This Vermeer BC-190 was first commissioned in 2017, has only approximately 433 total operating hours according to the meter, and is in very good overall condition with the usual signs of use and wear. It has just been serviced and is immediately ready for operation. Sale as a used machine excluding return, warranty, and guarantee. - Net price €19,900 // Gross price €23,681 - Viewing / test run possible by arrangement - Nationwide shipping can be organized; costs depend on distance! - We are happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Stationary shredding plant LINDNER Komet HP 2200. Electric drive: 2 x 200 kW Duedpfx Afsvpg A Sjnon Including control cabinet and hydraulic power unit. The machine is immediately available and was completely overhauled in 2024!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Dusdpfx Afjyh Hllsnen Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: like new (used), Cove Equipment Shredder Model: SH-5 Dujdsf N Nd Sepfx Afnsn Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Dedpoft U Saofx Afnjun Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: refurbished (used), functionality: fully functional, rotor diameter: 400 mm, rotor length: 1,000 mm, power: 37 kW (50.31 HP), rotational speed (max.): 100 rpm, working width: 1,000 mm, Single shaft shredder OVERHAULD Rotor diameter: 400mm Working width: 1000mm Dujdpfx Asvnl Ukjfnen Drive: 37kW Hydraulics: 1.5kW Rotor blades: 48 pieces Stator blades: 4 pieces - Adjustable

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Dodod Sblmepfx Afneun Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Working width: 1000mm