Used Blown Film Extrusion for sale (1,694)

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Iisdpew Nhavsfx Agzsk Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Year of construction: 2009, condition: excellent (used), max in operation for 4 years die 700 mm dosing 1+3 components NGR trimming recycling - including Futec optical flaw inspection system Iedpfx Asxu N Iqegzoik manufacturing year 2009 machine is designed for low-gel film production for the semiconductor industry - including Fuji dual turret automatic winder manufacturing year 2009

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device Iiedpfxepah U Tj Agzsk MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: ready for operation (used), A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible. Iijdpfx Asw R Dh Esgzjk

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Iiedew Ahfgjpfx Agzok Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Iisdpfx Agev T An Sezek

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Iiodpfou Ttf Nex Agzek Take-off device and impact shears

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50003, input voltage: 380 V, input current: 53 A, The line was used very little, 2-3 hours per shift. It had been idle for the last year due to a change in the packaging process. Ijdpfxoxp D D Ne Agzsik The decision was made to sell it. If you have any questions, I will be happy to answer them.

Condition: used, Year of construction: 1996, functionality: fully functional, IDE haul-off unit 300 mm Iiodpfx Aexgh R Iogzjk

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, 3 Station Extruder Machine 1100 m2 Coex Unit 2 stations operational Corona unit Non-stop large-size winder-unwinder 2 station coex, one station mono extruder This machine has been designed to be compatible with the TETRA PACK production line. Additionally, we offer PRINTING and SLIDING machines that can be seamlessly integrated into the process. Iijdpfoxl Ucbex Agzok

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 035, Single screw PVC extruder Iisdpfx Aoxgh Dzsgzsk

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 021, IDE PVC single screw extruder Iodpoxghy Njfx Agzjik

Condition: used, functionality: fully functional, machine/vehicle number: 036, Year of construction: 1997, IDE single screw extruder for PVC profiles Iijdpfx Agsxghxrozsk

Condition: used, empty load weight: 5,720 kg, maximum load weight: 5,280 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 04/2021, suspension: air, tire size: 235/75 R 17,5, color: black, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * From 1 owner * Condition, see photos * Special low bed lowloader trailer from the premium brand GLORIA, type SO42 * New price in 2021 at € 174,000 net * Transport for lowered vehicles possible due to low loading height * Individual design and manufacture of Phantom Rider * Loading and unloading of the vehicle in less than 10 minutes * Vehicle doors can always be opened * Low bed length approx. 5,500mm x width 2,080mm * Distance between platform and roadway variable from 0 to 25 centimeters while driving up to 20 km/h * Normal driving height from 6 to 10 centimeters * Extremely smooth driving behavior thanks to air suspension and high deadweight of 6,000kg * Turntable for the front wheels of the vehicle makes steering movement possible during play * Rear axle can be hydraulically extended to the side * No excess width, unrestricted participation in road traffic * Steering can be controlled via master and slave hydraulics and can be adjusted for real effects * Steering can be locked * Compressed air connection * Tubular frame for 12x8 or 8x8 covering above the platform, height adjustable, can be quickly dismantled * Tubular frame for 8x8 covering in front of the platform, can be quickly dismantled * 24V battery for self-sufficient operation, thus also data bus release simulation * Total weight 11,000kg * Empty weight 5,720kg * Payload 5,280kg * * German vehicle * original ONLY 330,248 km * Body/structure: tractor unit * Engine 10.7 ltr. - 315 kW R6 diesel (OM 470) * EURO 6 standard * Trailer coupling * Total train weight 40,000kg * Axle load measuring device * Mercedes-Benz PowerShift gearshift * Gearbox 12-speed - Type: G 211-12 * Air conditioning * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Lane departure warning * Driver assistance system: Stability control assistant * Residual heat utilization * Cruise control system (cruise control) * Electric windows If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Iodpsv Dvuysfx Agzoik Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, Year of construction: 1996, functionality: fully functional, Triple extrusion line Technical details: Documented notes: The line has been modernized several times since its commissioning. Component arrangement according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame • Triplex extruder configuration • Control system with Beckhoff interface • Operator screens for displaying extrusion parameters • Winder units designated as “Wickler” Iodpjx Itgaefx Agzeik • Emergency stop button available • Industrial control cabinets installed

Condition: ready for operation (used), Extruder + electric cabinet output: 200 kg Heads not included Winder not included Iiedpfex Dd Hmox Agzjk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4600x1400x1800 mm Weight 2200 kg Iijdpfx Asx Emvcsgzsk total power requirement 9,15 kW

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6900 mm Measurements depth 32400 mm Measurements height 4800 mm This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. Iodex D D Dljpfx Agzjik Application Types Extrusion

Condition: used, For Sale: ULMA Ocean Shrink Wrapping Machine (2007) – Recently Out of Production We are offering a ULMA Ocean horizontal shrink wrapping machine, just taken out of production and in ready-to-use condition. This is a robust industrial shrink film packaging solution, ideal for high-speed packaging applications. The machine also includes a residual film rewinder for clean and efficient film handling. Key Features - Brand: ULMA Packaging - Model: Ocean - Year: 2007 - Type: Horizontal Flow Wrap Shrink Wrapper (HFFS) designed for shrink film packaging at high output rates. ([ULMA Packaging](?utm_source=)) - Industry Use: Originally developed for the frozen fish sector, but suitable for a wide range of products requiring shrink-wrapped finish. - Construction: Heavy-duty stainless steel and hygienic design for easy cleaning and operation in demanding environments. - Sealing System: Innovative oval motion cross sealing jaws for high-speed sealing and efficient product transfer. - Compact Footprint: Requires less than ~5 m² of floor space. Iiodpfox Ic E Ssx Agzek Estimated Technical Specifications (Based on typical Ocean configuration and published ULMA data for this model type) - Packaging Speed: High output (machine is capable of high-speed operation depending on product and film type). - Film Type: Polyolefin shrink film suitable for robust, retail-ready packaging. - Film Width Capacity: Typically capable of handling standard industrial shrink film widths (consult for confirm). - Operation: Automatic horizontal feed with cross sealing and continuous shrink tunnel compatibility. - Hygienic/Clean Design: Built to minimize dust and facilitate washdown cleaning. - Additional Equipment Included ✔ Rest Film Rewinder – collects leftover film for improved workflow and reduced waste. ✔ Optional shrink tunnel interface for seamless shrink finishing. ----- Excellent choice for food producers, contract packers, or industrial lines looking for proven ULMA reliability with an efficient shrink-pack solution. Contact us for more details, photos, or to arrange a viewing. ----- Als je extra details wilt toevoegen zoals precieze product-afmetingen, snelheid in stukken/minuut of elektrische specificaties kun je me die info geven of indien beschikbaar de machine-tag/plaatjes sturen — dan werk ik de advertentie verder af.

Condition: like new (used), Year of construction: 2018, Shrink Tunnel, Film Shrink Tunnel Manufacturer: Diez Model: HTC5030D Year of manufacture: 2018 No operating hours! Pass-through width: approx. 50 cm Iijdpfx Ajx Avxrjgzek Pass-through height: approx. 30 cm Overall length: approx. 220 cm 21225

Condition: used, Year of construction: 2016, functionality: fully functional, mileage: 17,500 km, 1. General Description Machine Name: QUADRUPLEX EXTRUDER No. 1 REF No.: FU-FPs 647 2. Functional Scope and System Components The overview presents the complete production line in conjunction with the quadruplex extruder, including material conveying systems, belt guidance, belt scanning, acceleration zones, cross-cutting, and cassette winding stations. 2.1 Main Assemblies - Extruder head - Multiple "swings" (pivoting arms), numbered 0 to 13 Iiodpfx Agox Irz Nozsk - Strip scanning systems ("Scan 1", "Tri Scan", Strip detection 1–4) - Cross-cutting unit ("cross-cutter") - Cutting machine - "Cutting table" - Conveyor belts labeled BELT 1, BELT 2, BELT 3 Winding Section: - Cassette winders 1–4 - Winding stations labeled "Winder 1–4" Note: Winders 1 and 2 marked "out of service" - Cooling water tank - Cooler - Electrical peripheral equipment, TCU units (temperature control units), control cabinets ("control cabinet", "ctrl.cab.") - Steel platform structures ("platform", cooling section platform) 3. Operating Parameters 3.1 Production Speed 0–30 m/min (specified production speed range) 3.2 Acceleration Section (Acceleration Speed Q1) From the provided calculations: - Basic production speed: 30 m/min = 0.5 m/s - Rocker cycle time: 4 sec - Belt shifting cycle time: 4 sec - Gap length: 2 m - Acceleration length: 8 m - Acceleration time: 16 sec - Speed difference: 2 m/s = 7.5 m/min - Resulting acceleration speed: 37.5 m/min 4. Strip (Material) Specifications 4.1 Strip Dimensions - Strip width: 20 mm – 220 mm - Strip thickness: 1.5 mm – 16 mm - Strip temperature: 10 °C – 45 °C - Strip weight: 0.02 kg/m – 2 kg/m 4.2 Strip Lengths Along the Line (Exact lengths between defined mechanical and sensor points) - Extruder head → Swing 0: 3,997 mm - Swing 0 → Swing 1: 10,279 mm - Swing 1 → Strip detection 1: 14,400 mm - Strip detection 1 → Strip detection 2: 39,159 mm - Strip detection 2 → Strip detection 3: 1,812 mm - Strip detection 3 → Strip detection 4: 27,702 mm - Strip detection 4 → Cross-cutter: 22,032 mm - Cross-cutter → Transfer belt pos. 10: 13,956 mm Other splitting and merging sections: - From splitting point pos. 10.1 → Rocker pos. 5: 17,545 mm - From splitting point pos. 10.2 → Rocker pos. 5: 17,542 mm - From merging point pos. 10 → Belt splitting point pos. 1–4: 17,827 mm Final travel lengths to winding stations: Belt position To cassette station – belt end Position 1: 6,050 mm Position 2: 9,072 mm Position 3: 12,376 mm Position 4: 15,393 mm To Spool Core (inner core) Position 1: 6,844 mm Position 2: 10,004 mm Position 3: 13,346 mm Position 4: 16,325 mm 5. Installed and Referenced Equipment The document lists an extensive chain of equipment references from which the quadrup­lex extruder line is "derived" or which it "includes", for example: - FU-FPs 648 – Cassette winders - FU-FPs 649 – Conveyor modifications - FU-FPs 650 – Extruder modifications - Older equipment from Berstorff (1995–1996) - Triplex winding equipment - Steel structural foundations (2005, 2019) - Conveyor control desks (Erhardt + Leimer, 2019) - Axelent safety fence - Various construction and civil engineering modifications (2018–2019)

Condition: not inspected (used), Year of construction: 2007, product width (max.): 400 mm, working width: 400 mm, Shrink Film Packaging Machine Manufacturer: IFP Film wrapping machine for parquet and profile boards Year of manufacture: 2007 Working width: 400 mm (450 mm for the film packaging machine) Consisting of: - Powered infeed table - Wrapping/welding machine for film packaging - Powered intermediate conveyor - Shrink tunnel / hot air oven for shrinking the packaging film - Powered outfeed table Iiodpfx Agox E N N Eozok Includes: Film roll holder for large rolls Various film rolls (approx. 20 pcs)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1400x1800 mm Iodex Emu Sjpfx Agzeik Weight 2500 kg total power requirement 8,05 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3960x1400x1800 mm Iijdpfox Emu Eox Agzok Weight 1200 kg total power requirement 9,15 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 7600x1400x1800 mm Weight 2950 kg Total power requirement 9,15 kw Iodpfevz Hu Ejx Agzeik