Used Cnc Borer for sale (8,791)

Condition: used, machine/vehicle number: 008696, X axis working area: 7400 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 15 KW Dkedpfx Apezrux Nswjr Number of controlled axes: 5 axes Total number of tool changer positions: 30

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds Dedszrpl Djpfx Apwskr - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: used, Year of construction: 2012, controller manufacturer: Mitsubishi, controller model: M70, _____ Description: Year of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm Mainspindle: Technology:Belt-driven spindle Speed:6.000 rpm Power (max.):7,5 kW Dedsztifmspfx Apwskr Torque (max.):60,8 Nm Barcapacity:42 mm C-Axis:0,001° Workpiececlamping:Collet chuck, Type 173E Subspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):5,5 kW Torque (max.):38,7 Nm C-Axis:0,001° Workpiececlamping:Collet chuck Movement in X/Z:140/310 mm Rapid travers in X/Z:12 m/min Toolcarrier (X/Y/Z): Technology:Turret with 8 stations Tooldrive:5.000 rpm Movement in X/Y/Z:140/70/235 mm Rapid travers in X/Y/Z:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Rawmaterialfeed:Bar laoder, IEMCA Master 80 HF Finishpart removal:Part catcher with conveyorbelt Fire-extinguishing unit:Kraft + Bauer Further Equipment:Trafo

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Dedpfx Apozqz Nxswokr Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 31

Condition: used, SCM Routech R 3000 CNC machining centre for machining sheet material, with automatic loading (vacuum destacker) and unloading. Dksdpfxozryylj Apwsr Technical data: - Working area: 2,600 x 1,250 mm - X-axis: 2,700 mm - Y-axis: 1,600 mm - Z-axis: 250 mm - Spindle motor: 7.5 kW - Feed rate: Max. 38 m/min - Video: On request

Condition: used, Insert-type milling cutters for CNC machines. Dodpfozrydwsx Apwjkr

Condition: used, Shank cutters and drill bits in mint condition, unused, sharpened and second-hand, for CNC machines, as shown in the examples. Technical data: - Length: Various Djdpfx Aezrybpepwskr - Diameter: Various - Shank: Various - Weight: 12 kg - Application: Woodworking

Condition: used, CNC gearboxes for use in Weinig machines or similar. Dsdpezrxlmefx Apwokr

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Dksdpfexgfbqex Apwer

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Dodpfxjzr H I Ao Apwskr

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Djdpfx Aezr H Ivjpwskr Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Cable remote control Central extraction port: 200 mm Weight: approx. 2700 kg Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: good (used), Year of construction: 2007, CNC - lathe machine Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year: 2007 SPECIFICATIONS Max. turning length: 1.055 mm Turningdiameter: 120 mm Max. swing over bed: 285 mm Rapid motion: (X/Z): 20 m/min Main Spindle Dkedpfozinn Ejx Apwer Max. revolution: 3.500 rpm Spindle power: 7,5 / 5,5 kW Bar capacity: 43 mm Spindle nose: A2-6 Amount of turrets: 2 Tool capacity: 6 + 6 Tool: Capto Tailstock Quill diameter: 85 mm Quill: MK 4 quill range: 70 mm Tailstock cross travel: 520 mm Steady rest: hydraulisch Steady rest: SMW SLU-1-Z Equipment Chip conveyor Cooling pumps Tool setter

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Dksdpfx Apozqt Umjwsr Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2010, controller manufacturer: Mitsubishi, controller model: TX8i, _____ Description: Year of manuf. : 2010 Control : Mitsubishi TX8i Turning diam. : 250 mm Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power (max.):11 kW Torque (max.):280 Nm C-Axis:0,001° Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Gr. 65 Toolcarrier (X/Y/Z): Technology:Turret with 12 Stations Taper:VDI 30 Dkodpfxjzr Th Ao Apwor Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:210/70/450 mm Rapid travers in X/Y/Z:15/10/18 m/min Tailstock: Technology:Hydraulic driven Stroke:60 mm Sleeve-ø:70 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 20 bar Rawmaterialfeed:Barloader, FMB SL 80 S Finished part removal:Parts catcher with conveyor belt Oilmistseparation:Electrostatic Extraction, LTA AC 3001 Further Accessory:Misc. used static Toolholder

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Dkedoyf Rqvepfx Apwjr Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: New HR-510External coolant Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2009, Technical details: turning diameter: 380 mm turning length: 538 mm total power requirement: 26 kW Dkjdpfxszq S Dyj Apwsr weight of the machine ca.: 5,2 t

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Japanese brand Mazak, model Quick Turn 8n, with Mazatrol T32-2 control. The machine is equipped with a bar feeder and a collet chuck. We can arrange for machine loading at the location. Net price: 23,000 (plus 23% VAT) Turning diameter: 160 mm Maximum turning length: 285 mm Dkedpfx Apjzc Ri Tswjr Spindle bore: 40 mm Maximum spindle speed: 6000 rpm 8-position turret Tailstock included Tool measuring probe Weight: 2700 kg

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Dedpfx Apszrv Dgewekr Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: new, Number of spindles 6 St. Working width 15 - 250 mm Working height 10-200 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. Kuper SWT XL-6 Automatic Planer and Moulder (Window Version with Glazing Bead Separation) ----- - ??Number of spindles: 6 (Bottom, Right, Left, Top, Top, Bottom) - Working width: 15 - 250 mm - Working height: 10 - 200 mm - Spindle speed: Frequency-controlled 4,000 - 8,000 rpm - Feed speed: 6 - 24 m/min, infinitely variable - Feed motor with electronic brake: 4 kW - Equipped for glazing bead separation in window production - Motorized axial and radial spindle adjustment - K2 Comfort Control, Professional - 9" Touchscreen Manufacturer's Description (Summary): ----- 1st Spindle: HORIZONTAL BOTTOM ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 275 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool cutting circle: 125 - 160 mm Rebating unit: 20–25 mm diameter difference relative to planing head Important: Machine cannot be operated without the jointing/rebating cutter Djdpfszrh E Nox Apwekr Extraction nozzle: D = 125 mm "Pro-Lock" tool clamping system 2nd Spindle: VERTICAL RIGHT ----- Siemens IE3 motor with inverter brake: 7.5 kW Diameter: 40 mm Spindle length: 176 mm Clamping length (effective length): 170 mm Speed, frequency-controlled: 6,000 - 8,000 rpm Tool cutting circle: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 3rd Spindle: VERTICAL LEFT: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 176 mm Clamping length (effective length) 170 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 60 mm Standard profile depth 20 mm Table plate adjustable to tool radius Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector (chips discharged downwards) "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 4th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake, 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Pneumatic pressure shoe, dynamically adjustable via linear guides Pressure lips in front of the spindle: pneumatically sprung, externally adjustable, with path control Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction; individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized radial positioning Motorized axial positioning 5th Spindle: HORIZONTAL TOP: ----- Siemens IE3 motor with inverter brake 7.5 kW Diameter 40 mm Spindle length 260 mm Speed, frequency-controlled 6,000 – 8,000 rpm Tool cutting circle 112 – 200 mm Axial adjustment range 20 mm Standard profile depth 20 mm Extraction nozzle dia. 125 mm Extraction: individually adjustable chip deflector "Pro-Lock" tool clamping system Motorized ...

Condition: defective spare-parts repository (used), Year of construction: 1986, functionality: not functional, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, Sale from Bremen location Manufacturer Mazak Power Center SV-12 with Mazatrol CAM M – 2, with tool changer for 30 tools, with grooved clamping table and other accessories The machine is defective and is explicitly sold as a source of spare parts. The exact defect is the absence of the control board. However, many components are still complete and can be used as spare parts. A test run is not possible. Year of manufacture 1986 Technical data Travel distances X/Z-axis approx. 1250 mm, Y-axis approx. 550 mm Control system Mazatrol Cam M-2 Table size 1300 x 500 mm Max. table load approx. 800 kg Travel distance X-axis 1250 mm Djdpfx Apjzq H A Djwjkr Travel distance Y-axis 550 mm Travel distance Z-axis 550 mm Spindle mount BT 40 / SK 40 Spindle speed max. 400 – 6000 rpm Tool changer 30 tools Drive power 11 kW Weight 7000 kg L x W x H 360 x 300 x 295 cm

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Dodpfjzrvvvex Apwekr

Condition: used, Year of construction: 2010, The machine is powered and can be inspected. Max. machining diameter: 280 mm Max. machining length: 409 mm Bar capacity (main spindle): 52 mm Main spindle: Chuck size: 6 inches Max. speed: 6,000 rpm Dedpfx Apewk Hwqowekr Motor power: 15 kW (40% duty cycle), 11 kW (continuous operation) Max. torque: 184 Nm Counter spindle: Chuck size: 5 inches Max. speed: 6,000 rpm Motor power: 11 kW (25% duty cycle), 7.5 kW (continuous operation) Max. torque: 90 Nm Tool turret: Number of stations: 12 Max. speed of driven tools: 5,000 rpm Motor power (milling spindle): 5.5 kW (40% duty cycle), 3.7 kW (Continuous operation) Max. torque (milling spindle): 47 Nm Travel ranges: X-axis: 187 mm Y-axis: 100 mm Z-axis: 510 mm W-axis (counter spindle): 460 mm Rapid traverse speeds: X/Z-axis: 33 m/min Y-axis: 21 m/min W-axis: 30 m/min CNC control: MAZATROL SmoothG Machine weight: approx. 3,600–4,720 kg (depending on model) Dimensions (L × W × H): approx. 2,400 × 1,800 × 2,000 mm Special features Multi-tasking capability: Turning, milling, Y-axis, and counter spindle enable complex machining operations in one Clamping. Integrated motor spindles: Both the main and counter spindles feature integrated motors that minimize vibration and ensure high machining accuracy. Y-axis machining: Enables the machining of complex workpieces with high precision.

Condition: used, machine/vehicle number: 008698, X axis working area: 4200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 18 Dedpeztka Eofx Apwokr Total number of tool changer positions: 22

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000 - 5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Dodpfx Ajx Eh Drepwskr Sheet metal thickness, steel (max.): 15 mm Sheet metal thickness, stainless steel (max.): 8 mm Sheet metal thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser cooler: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3826

Condition: used, Year of construction: 2006, CNC gantry cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 3826 Dkodpfx Aow El Udepwor