Used Dmg Mori for sale (184)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 10 kVA - Rated current: 25 A Bsdoyvql Nepfx Ab Ujwk - Centre distance: approx. 750 mm - Centre height over bed: 190 mm - Swing over bed: 380 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool holder, as well as a HAINBUCH clamping system, diameter: 140 mm, and a two-axis digital readout by DMG MORI. Please note: The item must be collected firmly between 12/05 and 22/05/2026 at an exact date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2016, CNC Control Axes X-axis travel mm: 1050 Y-axis travel mm: 530 Z-axis travel mm: 510 4th axis: DDRT-260X Feed rate m/min: 5 Rapid traverse m/min: 30 Work Table Number of pallets: 1 Table dimensions mm: 1350x600 Maximum workpiece weight kg: 1200 Table surface configuration: 18mm T-slot, 6 units Spindle Spindle speed rpm: 8000 Spindle power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool System Tool holder: MAS-BT 50 Tool magazine positions: 30 With adjacent positions free mm: 240 With adjacent positions occupied mm: 120 Maximum tool length mm: 350 Maximum tool weight kg: 20 Bsdpfxsyyc Dle Ab Ujwk Tool change time s: 2.34 Equipment Chip conveyor Internal coolant supply Rated power kVA: 52 Machine basic dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 7700

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, controller manufacturer: FANUC, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. Bwodsyu Sc Eopfx Ab Uek • V3 Version (No counter spindle, no y axis) • no bar loader

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm Bwedpfxoycxino Ab Uek total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Bedpfx Aeyuc Apjb Uewk Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2013, operating hours: 31,460 h, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, table load: 1,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm • Through-spindle coolant: 20 bar • Operating mode 4: machining process control (work with open work area door allowed) • Repairs/maintenance: • C-axis seal replaced just after warranty (improved version) • Spindle replaced (05/2021) • Machine measured last year – circular interpolation (Ballbar) within tolerance • Typical use: • Duralumin machining 80% overall • 3-axis: 50% • 5-axis: 40% (up to 10% 5-axis continuous) Bwjdpfxjyt Rdrs Ab Uek Additional equipment • Measuring probe: TS649 • Tool probe: Blum Laser • 3D quickSET • Electric handwheel • Rinsing gun • Chip conveyor Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, table load: 100 kg, spindle speed (max.): 42,000 rpm, number of axes: 5, This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details. • Fixed table with T-slots • Clamping surface: 450 × 400 mm • Spindle interface: HSK-E32 • Spindle torque: 6 Nm (S1 100%), 7.5 Nm (S6 40%) • Automatic tool changer, pickup system • Tool magazine capacity: 24 tools (HSK-32) or 22 tools (HSK-40) • Air blow through spindle axis • Ethernet interface ready • CELOS control system with Siemens 840D sl Operate • 21.5” ERGOline touchscreen control panel • CAD/CAM connectivity Bwodpsyt Nxzjfx Ab Uek • Compatible with PPS/ERP systems • 5-axis precision package • Integrated tilting rotary table • A-axis tilt range: -15° to +130° • C-axis rotary table diameter: Ø250 mm • C-axis integrated torque motor • Maximum rotary speed: 50 rpm • 4-color machine status signal lamp • Remote diagnostic capability (DMG MORI NETSERVICE) • IoT connectivity (DMG MORI IoTconnector) • Remote service monitoring (Service Agent) • Machine installation and commissioning included • 3D STEP model for CAD integration • Permanent lubricated spindle Additional equipment • Automatic pallet/part handling automation PH10 • Linear magazine automation system • Pallet capacity: up to 132 positions (ITS 50) or 66 positions (ITS 115) • Maximum workpiece height (automation): 260 mm • Machine transport lifting device • Machine packaged for truck transport

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) Bwjdpfoyt Hwzsx Ab Ujk • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Bedpfxjyubz Do Ab Ujwk Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, Control Unit Brand SIEMENS Model 840 D Main Drive Bwodpfxjx H U Eze Ab Ujk Number of axis 5 This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2, year 2022. Siemens SlimLine control. Travels: X-500 mm, Y-450 mm, Z-400 mm, B -5 / +110°, C 360°. Spindle max 15,000 rpm. Tool magazine for 60 tools, BBT40. Through-spindle cooling 70 bar. Chip conveyor. Filter paper. High-pressure coolant pumps. Workpiece probe, tool probe. Quickset (rotary axis calibration). Machine in very good condition, available at our warehouse in France, 01360 Loyettes. Full specification below in PDF. Bwedpfexyi Hwjx Ab Uok

Condition: excellent (used), Year of construction: 2020, operating hours: 2,139 h, functionality: fully functional, machine/vehicle number: NL257200651, turning length: 700 mm, turning diameter: 366 mm, spindle motor power: 19 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 5,800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year: 2020 Condition: Excellent Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine hours: 7,598 h Program runtime: 2,139 h Details: Base machine: NLX 2500/700 with driven tools and C-axis Universal lathe with 3 axes Turning length: 700 mm Main spindle with integrated motor spindle ISM 80 (bar capacity in mm) AC motor with 15 / 18.5 / 18.5 kW power (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping system (see clamping cylinder/chuck) C-axis with hydraulic spindle brake 10-station BMT turret 10-station driven tool turret NC tailstock CELOS® with Mitsubishi control M730UM Control: Mitsubishi M730UM controller with CELOS CELOS - ERGOline Touch Spindle: Main spindle (Spindle 1) standard Spindle options: Oil blower cooler for circulating coolant oil Chuck for main spindle: Main spindle (Spindle 1) 10" hollow chuck Ø254 mm Main spindle (Spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Chuck options: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-station BMT60 turret for MC configuration Overhang for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock taper for live center MK 5 (live center not included) Coolant / Chip removal: Use of water-soluble coolant (emulsion) Hinged belt chip conveyor, discharge right (500,700) Coolant system with increased pressure, 5 bar I/F for oil mist separator (extraction opening Ø 150 mm + electrical components) (AFS 1100) AFS 1100 oil mist separator Bjdpfeyxglkjx Ab Uowk Measuring / Monitoring: Manual tool presetter (swiveling, standard) Additional options: Customer voltage: 380 V Frequency: 50 Hz Metric setting SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, number of driven tool stations in tool turret 1: 10, number of driven tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Bedpfsytrnlex Ab Ujwk Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 x17 static tool holders x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 remote electronic handwheel (Jogwheel) x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 More information upon request.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, spindle speed (max.): 10,000 rpm, overall weight: 27,750 kg, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 4,000 kg, number of axes: 5, This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. Bodpfx Aoyr Sc Hob Ujwk • Table dimensions: 3200 mm (L) x 1100 mm (W) • C 360° rotary axis • Maximum load capacity: Table 4000 kg / Divider 1200 kg • Tool magazine capacity: 60 pockets Additional equipment • Tool measurement systems: Mechanical and laser (BLUM) Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2023, CNC Milling and Turning Center Machine type: DMG Mori CLX 450 TC Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 TECHNICAL DATA: Max. turning length: 1,100 mm Turning diameter: 400 mm Main spindle: ISM 65 Speed range: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm Spindle nose: A2-8 Bar capacity: 67 mm C-axis CNC spindle swiveling for milling and turning operations Max. speed: 12,000 rpm Drive power: 8.8 / 10.5 kW Torque: 73 / 90 Nm Tool interface: HSK 63 Tool stations: 30 Counter spindle: ISM 65 Spindle nose: A2-8 Max. speed: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm C-axis X-axis: 750 mm Y-axis: 100 mm (+/-) Z-axis: 1,100 mm B-axis: +/- 120 mm Equipment features: Chip conveyor Direct measuring system Coolant wash-down gun 3-jaw chuck: SMW-Autoblok BBD 250/78 mm 3-jaw chuck: SMW BBD 250/78 mm Bodpfx Aeyw Hz Aob Ujwk Tailstock function via counter spindle High-pressure pumps: 8 bar / 20 bar Coolant tank: 600 l Oil mist extractor Probe: Renishaw RMP 40 Automation: Robo-to-Go Short bar feeder magazine

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1537001259A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,700 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 560 mm, table length: 790 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 20, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, spindle torque (max.): 83 Nm, Equipment: documentation/manual, DMG MORI ECOMILL 635 V CNC Vertical Machining Center - Connection: 17 kVA - Setup speed in X/Y/Z: 20 - 2000 mm/min - Travel measuring system X/Y/Z: 1 µ - Positioning uncertainty X/Y/Z: 6 µ - Tool holder: SK 40 - Table with 5 T-slots Bwjdjyrfv Hspfx Ab Usk Attention: All tool holders located in the tool changer are included in the scope of delivery! Attention: The item must be collected, bindingly, between 27.04. and 30.04.2026 on a date yet to be agreed. FCA D-45549 Sprockhövel – loaded on truck

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Additional Information: Second identical unit also available if required Bsdpfx Ajyvhuhob Uowk Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) Bjdpfx Abjx D Di Us Uowk • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 (3D), spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. • Operating hours: • Spindle hours after replacement: 2,900 h • Spindle hours (machine counter): 32,420 h • Power-on hours (counter): 60,300 h • Condition: Powered on and running in production; inspection possible (operation, geometry, overall condition) • Worktable size: 1400 × 560 mm • Axis dynamics: Rapid traverse 30 m/min (linear axes) Bwsdpfeylkl Tsx Ab Usk • Spindle: • Tool clamping: DIN 69872 • Tool magazine: 30-position chain-type magazine with double gripper • Cooling/media: Coolant–air switching via M-function (external), chip tray • CNC control: HEIDENHAIN TNC 620 (3D) with ASCII keyboard and 15" monitor • Measuring systems: Direct measuring systems (linear scales) on X/Y/Z; air purge for measuring system • Additional machine options: • Safe voltage package: X and Y axis motors with brake, overvoltage limiter, undervoltage monitoring with emergency stop trigger • Software options – HEIDENHAIN: • Option 3 (#21): M120 tool radius compensation for contouring, LOOK AHEAD up to 99 blocks, 3D machining, M118 handwheel positioning during program execution Additional equipment • Scraper-type chip conveyor (left side) • Coolant tank, 250 l • Manual wash gun for machining area • 4-color signal tower • HEIDENHAIN probing package: Wireless workpiece measuring probe and probe calibration ring • Manual handwheel (portable control panel) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) Bedpfx Aoyfv Tvsb Uswk • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Bodpfx Abex D Iiro Ujwk Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet Bwodpfxjx D Nl Io Ab Ujk • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 11,000 W, total height: 2,120 mm, overall weight: 5,500 kg, product length (max.): 2,900 mm, number of axes: 3, This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details. • Operating hours: 11,996 • Control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), indexing time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Tailstock: programmable (B-axis), stroke 564 mm • Coolant pump • Oil cooler Bjdpfx Absyg Iclo Uswk • Electronic handwheel • 3-color status lamp • Air-conditioned electrical cabinet • Condition/availability: machine in perfect condition; excellent appearance; very good condition; videos available; immediately available Additional equipment • Chip conveyor • Bar feeder interface • Bar feeder: SAMSYS MULTI-3000 (short bar, 1000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 – 10 – 16 – 18 – 20 – 25 – 26 – 30 – 40 mm • Square collets: 20×20 – 35×35 – 40×40 mm • Hex collet: 14 mm • Tool measuring probe arm • 7 driven toolholders (3 axial, 4 radial) • 15 static toolholders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation & CD-ROM • Transport and handling clamping brackets

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Iceland, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 Bjdox D Nd Dspfx Ab Uewk • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, spindle speed (max.): 28,000 rpm, spindle motor power: 55,000 W, This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Additional equipment • Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type • Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation • Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian • DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Machine Benefits Technical Machine Benefits • Rapid traverse speed: 90 m/min • Mounting surface: Ø 950 mm / b-tilt range: +10/-110° / c-rotation range: 360° / maximum table weight: 800 kg Bodjx D D Tgopfx Ab Uewk • 3d-controller heidenhain itnc530 hsci / operator interface: smart. Nc • Cooling: active cooling for spindle and linear drive • Mpc machine protection control / direct measuring system: with pressurized air cleaning / active cooling: electrical switch cabinet / additional cooling: external compressed air cooling