Used Doosan Dl 250 for sale (276)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MV0083-000047, overall weight: 5,500 kg, DOOSAN DNM 200/5AX – CNC 5-axis machining center – Year of manufacture 2015 For sale is a well-maintained DOOSAN CNC machining center, model DNM 200/5AX, in very good condition. Technical data: Year of manufacture: September 2015 Gsdpe Ahkdqofx Abhoui Travel distances X / Y / Z: 400 / 435 / 500 mm Spindle speed: up to 12,000 rpm Spindle power: 18.5 / 11 kW Rotary table diameter: 200 mm A-axis: +30° to −120° C-axis: 360° Rapid traverse rate X / Y / Z: 36 / 36 / 30 m/min Machine weight: 5,500 kg Connection: 380 V, 50/60 Hz

Condition: used, Year of construction: 2015, turning length: 1,000 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,050 mm, spindle motor power: 15,000 W, torque: 476 Nm, bar passage: 65 mm, CNC Lathe Manufacturer: DOOSAN Model: TL 2000 L Year of manufacture: 2015 Control system: Fanuc 31i Technical specifications: - Turning diameter: 210 mm - Turning length: 1000 mm Main spindle: - Max. speed: 5,000 rpm - Drive power - main spindle: 15 kW - Max. torque: 476 Nm - Bar capacity: 65 mm Travel ranges: - X-axis: 250 mm - Z-axis: 1050 mm - X2-axis: 150 mm - Z2-axis: 1030 mm - Spindle hours: approx. 700 h Equipment & accessories: - Steady rest Gsdexq R Evepfx Abheui - Chip conveyor In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2017 Godpozb Nahjfx Abhsui Operating hours: 8.000

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC turning center with a tailstock, manufactured in 2015, in good condition. It operated for 2 years in medium-volume series production and has since been used for smaller series and custom parts. The machine is equipped with a chip conveyor, tool probe, chuck with collet chuck, and a 3-jaw hydraulic chuck. It also has powered tool holders (3 pcs). Other features include: workpiece ejector, workpiece catching and removal system, tool load monitoring, oil separator for extended coolant life, high-rigidity cast iron machine bed, and a turret with 12 tool positions (24 positions total). Weight: 2900 kg. The machine is sold with 12 tool holders. Net price. If you have any questions or need further information, please send us a message. Gedpfey Uwgqjx Abheui The bar feeder shown in the pictures can be purchased separately (see our other listing).

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DOOSAN DNM 5700 was manufactured in 2021, 3 units available. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 3 units available • Condition: Excellent (used) • Functionality: Fully functional • 15" display • 2 MB part program storage / 1,000 programs • Rapid traverse X-axis: 36 m/min • Rapid traverse Y-axis: 36 m/min • Rapid traverse Z-axis: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Ethernet connection • Ball screw nut cooling • Tool breakage detection in magazine • Automatic doors • Standard-height column • Hydraulic system 3A + 1B • Seat air check • Coolant level sensor Additional equipment Gujdpfx Aez I Tkgjbhsi • Robot interface • 4th axis • Hiwin RCV 250 rotary table • HIWIN RTS 250 support • 4th-axis fixture support hydraulic • LNS MH500 chip conveyor • Oil skimmer, belt type • Coolant gun • Mist collector interface Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces Guodpfx Absz Rqqqehji • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained • Live inspection and test run available 3. Typical applications Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation Gjdpo Ah T Nnefx Abheui CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Roof with motorized top opening for crane loading Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2021. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 2 units available • CNC control: FANUC i Series (15" display, 2 MB program storage / up to 1,000 programs, Ethernet connection) • Rapid traverse X: 36 m/min • Rapid traverse Y: 36 m/min • Rapid traverse Z: 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Coolant gun • Ball screw nut cooling • Tool breakage detection in the magazine • Automatic doors • Robot interface • Preparation for 4th axis • Coolant level sensor • Mist collector interface Additional equipment • LNS MH500 chip conveyor • Belt-type oil skimmer • HIWIN RCV 250 rotary table (4th axis) • HIWIN RTS 250 support (tailstock/support for 4th axis) • Hydraulic unit 200 bar, 2 A+B • Hydraulic fixture support for 4th axis Godpjz N E Dvjfx Abheui • Seat air check Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B Gjdpfx Abj Af U Ezjhsui -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Guodsy D Rypjpfx Abhei Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: like new (used), Year of construction: 2026, operating hours: 42 h, functionality: fully functional, overall weight: 9,500 kg, fuel type: diesel, power: 504 kW (685.25 HP), output current: 910 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 504 kW (685.25 HP), nominal power (apparent): 630 kVA, continuous power (apparent): 800 kVA, total length: 5,000 mm, total width: 245 mm, total height: 2,650 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, rotational speed (min.): 1,500 rpm, type of input current: three-phase, We have the following emergency power generators or grid replacement systems from our series production for sale, with the following technical specifications: Condition: New, 2026 Engine: Doosan DP180LB Rated power: 700 kVA / 560 kW Speed: 1500 rpm Frequency: 50 Hz Rated voltage: 231/400 V - Includes batteries - Includes diesel tank (1000L) - Includes circuit breaker 4P ABB XT7S - Includes control system (island operation). - Optionally, a control system for grid-parallel operation, load distribution, and peak load management is available at an extra cost. Seamless integration into your energy infrastructure. Complete unit installed as a compact system in a soundproof, weatherproof container. Dimensions: 600x245x270cm (LxWxH) Weight: 10,500 kg Warranty: 24 months or 2000 operating hours. The emergency power generator will be delivered in operational condition, including a logged load test of 60 minutes. Gjdpfx Abjwqai Hohsui Delivery, installation, and commissioning are available at an extra cost. Price: €69,000 net Immediately available.

Condition: good (used), Year of construction: 2008, 250mm max. machining diameter, 510mm swing over bed, 510mm max turned length, Guods Ai R Hkspfx Abhei 6000rpm spindle, 51mm bar capacity, spindle speed 6,000 rpm, milling speed 6,000 rpm, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck, C axis & Milling, Tool presetter, Tailstock, Parts catcher,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Gjdpfx Ao Afpq Robhoui

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor Godpfx Ajzzdh Eebhsui - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Gsdpjwu Rgqofx Abheui Renishaw RMP60 workpiece probe TS27R tool probe

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, feed rate X-axis: 45,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Specifications Chip conveyor and set of tool holder. With hydraulic clamp with control unit. Table dimensions: 1200x540 mm Capacity Gsdpfx Aj Ah S Etebhoui Longitudinal X-travel: 1270 mm Cross Y-travel: 670 mm Vertical Z-travel: 625 mm Spindle Spindle nose: SK40 ISO Spindle speed: 12000 giri/min. Motor power: 18,5 Kw Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 30 nr.

Condition: used, Year of construction: 2006, Control system: Fanuc D-iT. Gedpfx Ao Ai Eq Tebheui

Condition: good (used), Year of construction: 2006, 510mm swing, 320mm max. machining diameter, 525mm max turned length, 4000rpm spindle, 65mm bar capacity, 12 station turret, 15W spindle motor, Guedpfs Ai R Dhjx Abhei FANUC Oi control, collet chuck, Tool setter Tailstock, Parts Catcher, Swarf Conveyor, Coolant

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: H2017, overall weight: 68 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, type of input current: three-phase, The Doosan H2017 is an advanced collaborative robot (cobot) that combines high performance with maximum safety and precision. Gjdpfx Aboz Sxc Rohsui With a lifting capacity of up to 20 kg and a reach of 1,700 mm, the H2017 is ideal for heavy and space-intensive tasks in industry, production, and logistics. The robot is equipped with six integrated high-performance torque sensors, which ensure extremely precise motion control and safe operation in collaboration with humans. This technology makes the H2017 particularly suitable for tasks where both strength and sensitivity are crucial – such as palletizing, machine tending, assembly, and handling of heavy items. Benefits of the Doosan H2017: ✅ High payload of 20 kg – perfect for heavy lifting ✅ Long reach (1,700 mm) – increased flexibility and coverage ✅ Six torque sensors – precise, stable, and safe collaboration ✅ Intuitive programming – quick implementation and startup ✅ Advanced safety features – meets international standards ✅ Robust and reliable design – suitable for industrial environments Ideal for: Palletizing and depalletizing Machine tending Assembly and joining Internal logistics and material handling Automation of manual and ergonomically demanding tasks With the Doosan H2017, you get a future-proof cobot that increases productivity, reduces the strain on employees, and delivers consistently high quality – every time. Availability: We have some almost new Doosan H2017 units for sale – still in their original packaging.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Gjdozwhtkopfx Abhjui Y Axis Travel: 670mm Z Axis Travel: 625mm Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: used, Year of construction: 2005, Control: FANUC 18-iTB Options: Interface for bar feeder magazine Part catcher for turned parts, max. part length 120 mm and ø 65 mm incl. part conveyor belt, on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the subspindle with ejector hinged belt chip conveyor, on the right-hand side, without chip cart Guedpfx Abj Ai Eatehei Bar loader FMB Turbo 5-55

Condition: used, Year of construction: 2001, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 240 mm, feed length Z-axis: 580 mm, overall weight: 4,100 kg, CNC Turning Machine, 1-Turret Manufacturer: Daewoo / Doosan Model: Puma 230A Year of Manufacture: 2001 Serial Number: XXXX Control System: Fanuc 18-T Operating Hours: Unknown Technical Specifications: Gsdpfx Abozzd I Sohoui ----- - Turret: 12 stations, BMT - Spindle Speed: 6,000 rpm max. - Bar Capacity: Ø 45 mm - X-axis Travel: 240 mm - Z-axis Travel: 580 mm - Hydraulic steady rest (following type) - Chip conveyor - Tool measurement system - Machine Weight: 4.2 t - Loading onto a truck is included in the price Accessories: ----- - Documentation - 2x Foot switches - 1x 3-jaw chuck - 1x Collet chuck, Hainbuch - Tool holder set

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, spindle bore: 81 mm, DN Solutions PUMA 2600YII, year 2022 Gusdo Ahxl Rjpfx Abhsi Fanuc i series Plus Axis travels: Z-830mm X-260mm Y-105mm B-830mm Max. Turning diameter: 376 mm Max. Turning length: 760 mm Standard chuck size: 10 inches Diameter when working with bar stock: 81mm Max. Spindle speed: 4000 rpm Max. Spindle power: 22 kW Built-in spindle (electric spindle) BMT65 turret with 24 positions C-axis driven tools Tailstock Tool probe Chip conveyor Prepared for bar feeder 4 driven tool holders (2 angled, 2 straight) 8 standard tool holders Chip conveyor with tray and pump Documentation Specification – PDF file

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 8,343 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Guedpfx Abs Akgn Eohoi Rear tire condition: 80 - 100% Description: Front forklift DOOSAN D35C-5 - 3.5 ton lifting capacity - Year of manufacture 2008 - Sideshift - TRIPLEX free lift mast - Overall height 2.34 m - Lifting height 4.9 m - 8,343 operating hours according to meter - 4-cylinder YANMAR diesel engine, 58 HP - Solid rubber tires approx. 90% - Full cab, heating, lighting system - mechanical version - good condition - PRICE: 12,500 EUR plus VAT. Sideshift, third valve, rear work lights, front work lights, partial cab, heating, full cab,

Condition: used, Year of construction: 2004, Year of manufacture: 2007 Control system: FANUC 18-iTB Options: Interface for bar feeder magazine Part catcher for bar turning parts, Guods Ai D Hcjpfx Abhoi max. part length 120 mm and ø 65 mm incl. part conveyor belt, located on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the counter-spindle with ejector hinged band chip conveyor, located on the right-hand side, without chip cart Bar loader: IEMCA