Used Drill Center for sale (16,825)

Condition: good (used), Year of construction: 2004, Vertical machining center, Mazak VCN-510C, manufactured in 2004. Gbedjzcu D Uspfx Ahnen

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 32 mm throat 285 mm bore stroke 160 mm turning speeds 55 - 1450 U/min Godpfx Aezcqzcjhnsbn taper MK 3 table-size 500 x 370 mm feed 0,1-0,2-0,3 m/min total power requirement 1,6 kW weight 400 kg dimensions 1000 x 700 x 1850 mm Features: - Automatic feed - Coolant system - Continuously variable speed control - Adjustable depth stop - Drill chuck

Condition: used, Year of construction: 2011, number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm Godpfjzczhasx Ahnebn control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Max. tap Ø: 40M Stroke pinole: 280mm Gbsdpfxszcnnae Ahnon Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, ROSILIO MILLING MACHINE Gjdpjzb Dcqsfx Ahnobn Type: C640 – Vertical machining center Travels (mm): X: 640 • Y: 400 • Z: 400 Table: 800 × 400 mm Maximum table load: Approximately 300–400 kg Spindle speed: Up to 8,000–10,000 rpm (5.5–7.5 kW motor) Rapid traverse rates: 20–24 m/min Numerical control: Siemens Total weight: Approximately 2.8–3.2 tons Approximate specifications

Condition: new, bore capacity in steel (diameter) 28.0 mm throat 320 mm Gedpfxjxaba As Ahnsbn bore stroke 150 mm morse taper 3 MK table: 500 x 350 mm turning speeds 75.0 - 3010 U/min total power requirement 1.35 / 1.70 kW weight 290 kg range L-W-H 600 x 700 x 1900 mm Description: - Standard with automatic quill feed (0.04 - 0.3 mm / rev) - Helical gear for optimal power transmission - High efficiency and smooth running thanks to helical gears - in combination steel against reinforced fiber material - Automatic quill feed - is deactivated when the set drilling depth is reached - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Stable and polished steel column, designed for heavy use - Quality ball bearings ensure high concentricity - 8 switchable speeds through powerful 2-stage drive motor - Adjustable drilling depth stop with mm scale Scope of delivery: - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal Godpfszczc Rex Ahnebn MORI SEIKI - SH 400

Condition: used, centre distance 2.000 mm turning diameter over bed 350 mm swing over plan sled 470 mm Gedpfx Ahozczhmsnobn bed width 525 mm turning speeds 25 - 1.250 U/min power capacity 18 kW spindle bore 92 mm spindle head ISO 702-3 Gr. 15 diameter of quill 145 mm Inner cone of the quill MK 6 longitudinal feed 0,035 - mm/-1 face feed 0,009 - 8,0 mm/-1 metrical thread cutting 0,5 - 304 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. The guideways are in very good condition. Technical features & accessories: - various accessories Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Vertical machining center, Haas MiniMill, year 2005... Gbodpfxjy Idpxj Ahnen

Condition: good (used), High-precision CNC rotary dividing table, fourth axis, manufactured by Tanshing CO, model MRNC-255HB. Table diameter: 255 mm, load capacity: 250 kg horizontally and 100 kg vertically, spindle bore: 32 mm... Gbedjy Av Ngjpfx Ahnjn

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Gbodot H Nbuepfx Ahnsn Equipped with chip conveyor

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: Working area X: 3,400 mm Working area Y: 1,287 mm Working area Z: 180 mm Number of milling spindles: 1 Gbodpfozc Sk Eex Ahnen Main motor: 15 kW Speed max: 24,000 rpm 4th axis Tool clamping system: HSK-F63 Tool changer positions: 18 Vertical drilling spindles: 18 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 2 Nut saw in X direction Design: Cantilever machine Machine table: Console table Number of consoles: 6 Positioning aid: Dot laser Number of vacuum pumps: 1 Capacity of vacuum pumps: 140 m³/h Safety device: Foot mat Control system: BECKHOFF CONTROL Software: HOLZ-HER CAMPUS V6.4 Conformity marking: CE marking Weight: approx. 3,840 kg Space requirement length: 6.7 m Space requirement width: 4 m Availability: Short notice, by arrangement.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 Godpfx Ahsx Iikbonjbn - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Gbedjxhg Dijpfx Ahnsn Technical modifications and errors excepted.

Condition: good (used), Year of construction: 2007, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, overall weight: 4,700 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, Control system: Ultimax 4 Distance from spindle center to table: 150 - 760 mm Drive power – main spindle: 7.5 kW Tool holder: SK 40 Table clamping area: 760 x 510 mm Max. table load: 700 kg Godpfx Ahszcu R Uensbn Tool changer with 24 stations

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, Equipment: rotational speed infinitely variable, H. Ernault.Somua lathe CE certification Gbjdozb In Repfx Ahnjn Cholet 550 model Newall DP 700 2-axis digital read-out system Completely retrofitted in 2020 Reference: E038

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, Gbjdszaz Uzepfx Ahnsn milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Fagor, controller model: 8055 iA/MC, total height: 2,500 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 410 mm, table height: 820 mm, table length: 900 mm, table load: 350 kg, overall weight: 3,630 kg, spindle speed (max.): 8,000 rpm, coolant supply: 2.7 bar, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 100 mm, tool weight: 8,000 g, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes - Ethernet connection - Spindle blow-out function - Work area lighting The machine can be inspected under power at any time. Gjdszc Htuopfx Ahnjbn

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant. Gbjdpfx Ahjwq Iwxsnon

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Gbedozcwylspfx Ahnjn Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min Gsdpfjy A Tdnox Ahnsbn control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details x-travel 2500 mm y-travel 920 mm Control Heidenhain iTNC 530 Gbedpfxjzclwle Ahnen total power requirement 92 kVA weight of the machine ca. 25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m Additional information Operating hours: 113475 Spindle hours: 58183 (June 2026) Heidenhain iTNC 530 CNC control Equipment: Tool changer Chip conveyor Tool measuring device Electronic handwheel Control cabinet with air conditioning Machine is sold without clamping devices, vise, and tools.

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 3-Axis Machining Center Deckel Maho Type DMU 60T Year 2001 CNC Heidenhain X-axis 630 mm Gjdpfxozb Exae Ahnebn Y-axis 560 mm Z-axis 560 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Gbjdpfeyindasx Ahnon Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm Gsdpfx Aszcqx Iehnsbn max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50