Used Edge Banding Round for sale (9,350)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) Fpsdpfxsz A Tx To Al Uen TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, - Year of manufacture: 2020 - Made in Bulgaria - DTR, CE TECHNICAL SPECIFICATIONS: Fpjdpfxjw H Ryue Al Ujn – Height of workpieces: 8-45 mm – Minimum length of workpiece: 100 mm – Minimum width of workpiece: 100 mm – Edge thickness: 0.4-3.0 mm – Feed rate: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum length of workpieces: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1x 1.1; 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge trimming unit: – Glue removal unit: – Polishing unit - motor power: 2x0.18 kW – Polishing unit: 2800 rpm – Extendable support with rollers: – Diameter of dust extraction nozzles: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions - L x W x H: 4130x1220x1470 mm – Weight: 1180 kg

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Fpodpfx Alozbc Eds Uon Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Fpsdjlikydepfx Al Uon Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: good (used), Year of construction: 1998, functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm Fpedpfxotrgy Ns Al Ujn 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: used, Year of construction: 2020, functionality: fully functional, SCM K560HP edger – 2020 model. FULLY SERVO-DRIVEN Serviced by an authorized SCM service center. In perfect working order, currently in operation. A complete description of the functions can be found in the attached photos. Fedpfx Alexn T Sgj Uepn Inspection and testing on-site are possible.

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. Fpjdporrzklefx Al Uon ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Fsdpfx Alow Dm Hrj Uspn

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Fpedpfx Aji Am Uksl Ujn Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Fjdpfxjzc Agke Al Ujpn Availability: short notice Location: Flörsheim

Condition: ready for operation (used), IM Very good condition. Fodpsvunm Aefx Al Uopn

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Fodpfx Alswpm Igj Uspn Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit Fedpfx Alsw I H Rko Uspn With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: like new (used), functionality: fully functional, Used professional deburring machine Used, professional, and robust deburring machine for the efficient removal of burrs and rounding of edges on metal parts. Suitable for use in workshops and industrial production environments. The machine is equipped with 3 brushes and a powerful 2.2 kW motor. Thanks to its solid construction and weight of approximately 410 kg, the machine is suitable for professional and continuous use. Technical specifications: Max. material dimensions: 120 × 120 mm Brush diameter: 250 mm Number of brushes: 3 Motor power: 2.2 kW Voltage: 400 V Speed: 1,380 / 2,840 rpm Weight: approx. 410 kg Fsdoz Ek Evopfx Al Ujpn Condition: Used Available immediately. Inspection and testing of the machine are possible by appointment.

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters Fpedpszk N U Aofx Al Uon - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Fedpfxsfi Tkvj Al Uepn Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation Fpedozk N Ehspfx Al Uon - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Fpodpow I U E Ajfx Al Uen Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Edge banding EVA glue End cutting saws pneumatic adjustable 0-15° Fodpfx Aet Ir Tpjl Uopn Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation.

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit Fpsdpszk Nmrsfx Al Usn - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Fpodpfx Aeu N T Ewsl Uon Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Fodpfxsxix Hxs Al Uspn Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 15 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 18 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Fpjdpfx Aozyaiiol Uon Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) A12 Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit (2 x Kw 0,35) pneu Rough Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (2 x Kw 0,4) Profile edge scraping unit (fast-release) Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit (2 x Kw 0,18)

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Total length 4130 mm Feed speed 11 m/min. Fpjdpezafppofx Al Ujn Weight 1250 kg

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 Fpedpfji Anadox Al Ujn F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.