Used Edge Tot for sale (3,948)

Condition: used, Storage location: Sonnefeld Bedpfxoway Dcs Acwewn

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Bsdpovvkd Tefx Acwewn Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bedpfx Asvvkfdscwewn

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Bwjdpfxevvkfqs Acwjn Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Bsdevvkfwjpfx Acwown

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Bwedpfx Acoxyiilswjn Storage location: Nattheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Bwodpfx Acjymcrbowsn Storage location: Nattheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads Bodpfx Ajy U R Izscwewn - Edge feed - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left/right with CM technology - Corner copying unit with diamond cutters - Surface scraper - Polishing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Condition: used, sanding width 150 mm Bodpey Umfvjfx Acwewn Motor output 1 kW tiltable up to 90 Grad Three-dimensional, swivel-mounted Löwer type KS 225 edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with high removal rates. Ideal for small joineries, furniture construction and interior fittings. Possible applications: Horizontal edge, horizontal plane or vertical bevel.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - Pin code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology Bsdey T S Ruepfx Acwewn

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Bwodpfey T S Rnex Acwon Battery capacity: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, construction height: 1,160 mm, fork length: 1,150 mm, empty load weight: 123 kg, total length: 1,530 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load center: 600 Fork width: 160 mm Fork thickness: 47 mm Transmission: Electromechanical Condition: New Bwsdpfxsy T S Rho Acwon Technical condition: New Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery Ah: 20Ah Battery manufacturer: Noblelift Battery type: Lithium-ion Battery year of manufacture: 2026 Description: - PIN code access - Discharge indicator and operating hour counter, - Lithium battery - Cushioned side support rollers D80x30 - Tandem load rollers D80x70 Impulse control, CE certificate, Non-marking tires, Lithium-ion technology.

Condition: used, Technical details: plate thickness: 10 mm Bodpfx Acsu Ngfqswjwn material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: Bwjdpfxjyrp Uae Acwsn - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: - - Tools available: Yes - └ 2nd unit type: - - Type/Brand: Nordson - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: No - └ 9th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Bwedpjyrpvwefx Acwen Price: On request - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: - - Type/Brand: Nordson - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Bwjdpfx Acjw Aig Sswen Storage location: Customer.

Condition: used, tiltable up to 90 Grad sanding width 180 mm Motor output 1,6 kW Bedpfxey T Sa No Acwjwn Lightweight, swivel-mounted MetaboType Tba 1018D edge sanding machine for precise sanding of straight and curved wooden edges. The lightweight design and powerful motor enable a uniform sanding pattern with a high removal rate. Ideal for small joineries, furniture making and interior finishing. Includes original Metabo base frame.

Condition: good (used), Year of construction: 2021, functionality: fully functional, PUR melting device for aluminum pouches/cartridges, with hose and filling head for use on edge banding machines Weight approx. 73 kg Melting capacity up to 2 kg Gear pump All heaters can be adjusted separately With electronic interface for glue level detection in the gluing section of the edge banding machine (level sensor "Tippkemper" for glue application, provided by the edge banding machine manufacturer) Connection value 400 V, 50 Hz, 3Ph, N Bwsdpfx Aoy S Rw Rocwsn Device delivered completely cleaned and with PUR cleaner.

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Bjdoy Uvl Sspfx Acwewn Pre-Auction Offers Considered Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Storage location: Supplier. Bedpfxey Tpz Dj Acwjwn

Condition: used, Year of construction: 1993, Working widths: 150 or 200 mm. Table on the surface grinding side (can be tilted downwards from 0 to 45°) and on the veneer grinding side: 280 x 1000 mm. Table in front of the belt tension roller: 400 x 300 mm. Connection power: 3 kW. Oscillation stroke: approx. 15 mm. Dust extraction connection diameter: 150 mm. Weight: approx. 400 kg. Storage location: Supplier. Bodpfx Acey Tpzwswewn

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Bedpfx Acorz Tupswswn Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Bedoyqxxrspfx Acwown Total number of drilling spindles: 40 Total number of tool changer positions: 22

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 Bsdpfx Acezbc Edjwjwn CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Bsdpfx Acewq Hp Tswewn Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.