Used Emco 10 for sale (148)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A • Short-circuit current (Ik): 6 kA Dkodpjy A Hw Usfx Anwjl • Duty cycle: S6 – 40% Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Year: 2017 Some repairs have been carried out, and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are 'slightly' worn. Tool turret checked and adjusted. X-axis belt renewed and machine zero point set. Z-guides in the area of the chuck are slightly worn. Automatic band lubrication oil leak – troubleshooting completed, problem resolved, lubrication oil line renewed. 100% operational. Loaded free of charge. Immediately available. Location: 8740 Zeltweg, Austria Djdew I S Uuepfx Anwekl

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,000 h, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC620 HSCI, total height: 3,032 mm, table load: 50 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,000 W, number of axes: 3, This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details. • B-axis swivel range: ±100° • C-axis swivel range: 0–360° • Spindle torque: 33 Nm • Tool magazine: 50 positions • Table surface: Ø 400 mm • Table T-slots: 5 slots, 14 mm size, 75 mm spacing • Table height: 860 mm above floor • Transport dimensions: approx. 1600 mm x 2295 mm • Spindle hours: 11,000 Additional equipment • Automation: Lang Eco Compact 10 (fully configured/functional) • Chip conveyor: Yes • Included accessories: Extensive ISO30 tool holder package • Special feature: Custom-made workspace hood/cover Dkodpfey Aw Nzox Anwsl Technical Specification Taper Size ISO 30

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, With the EMCO short bar loader SL 1200, EMCO offers the perfect solution for automatic feed and reloading of bars up to a maximum length of 1200 mm. The advantages: compact footprint and short loading times thanks to shorter strokes. Fully functional, in very good condition. Technical specifications of the LM1200: Bar length: 150 - 1200 mm Bar diameter: 8 - 90 mm Feed travel: 1350 mm Max. feed speed: 60 m/min Max. return speed: 60 m/min Bar feed time: approx. 3 sec. Bar changeover time: approx. 12 sec. Material storage: 9 bars with Ø 65 mm or 97 bars with Ø 6 mm Loading side: Rear Power supply: 24 Volt DC (Interface) Air supply: 4 - 6 bar Dsdpfoy Iychex Anwekl Length: 1700 mm Width: 1100 mm Height: 1200 - 1500 mm Weight: approx. 450 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 9,800 h, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 460 mm, feed length Z-axis: 450 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 50 rpm, table width: 500 mm, table length: 630 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, rotational speed (min.): 50 rpm, overall weight: 6,500 kg, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, CNC Machining Center EMCO Maxmill 630 – Year 2021 – Excellent Condition For sale is a high-quality CNC machining center, model EMCO Maxmill 630, manufactured in 2021. Model: MX 630 Serial number: M-0060621 Weight: 6500 kg Manufacture date: 04/2021 Compressed air pressure min./max.: 0.6 / 0.7 MPa Rated voltage and frequency: 3PE AC400V 50Hz Full load current: 29 A Main supply fuse: 50 A gG-GL Rated short-circuit current: 10 kA Wiring diagram number: MX630H2Y01 Control cabinet weight: 500 kg The machine is in excellent, well-maintained condition and has been regularly serviced. It is currently still in operation and can be inspected by appointment at any time. Technical data: Power: 15 kW Max. torque: 100 Nm CNC control: Heidenhain Control type: TNC620 NC software: 817601 070SP2 Hotfix1 FS Travel (X, Y, Z): approx. 500 x 460 x 450 mm B-axis swivel range: +/- 100° C-axis swivel range: Nx360° Workpiece support: diameter 630*500 mm T-slot width: 14 mm (center H7) Spindle: 50-12000 rpm Tool changer: 30-position, ISO 40 taper Spindle operating hours: approx. 2,400 h Dodpfx Aney Nmh Hjwskl Control operating hours: approx. 9,800 h Equipment / Features: - Regular maintenance by qualified personnel - Very good overall condition - Complete documentation/maintenance records available - Precise and reliable in operation - Ideal for single parts and series production Asking price: €109,000 Location: Austria / Styria Other: The machine is immediately ready for operation. Sale due to restructuring / new acquisition. Inspection and test run possible at any time by appointment. If interested or if you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Djdpfx Ansy A U Izjwjkl Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Year of construction: 2013, condition: ready for operation (used), A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible. Dedpey H I Hxjfx Anwekl

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Dkedpfoy H I H Sjx Anwel

Condition: used, Year of construction: 2013, Technical details: bar material dia.: 65 mm turning length: 644 mm turning dia. over bed: 600 mm turning diameter over slide: 430 mm y-axis: 100 (+-50) mm turning speeds: 2x 5.000 1/min positive location each: 2x C-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12 VDI 30 Pos. driven tools: 2x 12 Pos. turning speeds: 2x 4.000 1/min control: FANUC 18 iTB total power requirement: 30 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, Dodpephuwqefx Anwskl parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding" *

Condition: used, Emco F3 - Milling Machine Accessories: - Vice - Workplace lighting - Coolant system - Tools & machine feet - Operating manual Technical specifications: Working area: - Longitudinal travel: 300 mm - Transverse travel: 200 mm - Vertical travel: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Swiveling vertical milling head: ± 90° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Slot spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: extraction bolt M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slide: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (stepless) - Rapid traverse: 1200 mm/min Coolant system: - Tank capacity: 30 l - Pump capacity: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% duty cycle) - Speed: 1400 / 2800 rpm Dkodsy A Sdyspfx Anwsl Dimensions: - Dimensions W x H x D: approx. 1200 x 1900 x 1400 mm - Machine weight: approx. 450 kg

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Spindle bore 108 mm Capacity 2000 x 570 mm Steady rest Dsdpfxex E Au Ie Anwokl

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Djdpexzq Ncsfx Anwekl Transport can be organized upon request!

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Dkodjy Abbnjpfx Anwsl Various tool holders

Condition: good (used), Year of construction: 2008, operating hours: 5,763 h, functionality: fully functional, turning diameter over cross slide: 85 mm, turning length: 300 mm, spindle bore: 25 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, total height: 1,900 mm, total length: 1,700 mm, total width: 1,300 mm, overall weight: 1,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E25 CNC Lathe with Siemens Control Condition: Very well-maintained, fully operational Location: Graz Manufacturer/Model: EMCO EMCOTURN E25 Control: Siemens Year of manufacture: 2008 IMAGES/VIDEOS: For additional images and videos of the running machine, please send us your request. Technical Specifications: Working area: X-axis travel: 100 mm Z-axis travel: 300 mm Tool turret: 12 stations Turning diameter: Ø 85 mm Swing diameter: 225 mm Spindle bore: Ø 25.5 mm Speed: Minimum: 60 rpm Maximum: 6300 rpm Coolant pump: Yes Machine weight: 1400 kg Dimensions: Length: 1700 mm Width: 1300 mm Height: 1900 mm Contact: Please feel free to contact us to arrange a viewing appointment or to receive an offer! Dkedpfx Aoyxvwienwsl

Condition: good (used), turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Dkjdpfxeyz Dg Ro Anwsl Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions Dkodpfx Ajyz Dg Donwol

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC Turning and Milling Center | EMCO MaxxTurn 45 Manufacture of complete turned parts, diameter range 6 – 40 mm and length 10 – 150 mm Dkedpfx Aeyzy Ausnwsl Control FANUC 18i-TF, main and counter spindle, travel X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with live tooling VDI 25, max. speed 6,000 rpm, material ejector, remote control, - Bar feeder TOP etl 8-50, year 2018, S/N 95692, L = 5,000 mm Inspection possible at any time by appointment.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC Turning and Milling Center | EMCO MaxxTurn 65 Production of complete turned parts, diameter range 10–65 mm and length 10–200 mm Dkodpsyzywxjfx Anwsl Control: FANUC 31iB, power 29 kW, main and counter spindle, maximum spindle speed 5,000/7,000 rpm, travel paths X/Z = 260/610 mm, 12-position tool turret with driven tools (VDI 40), max. turning diameter/length = 320/550 mm, workpiece ejector Inspection possible at any time by arrangement.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: R2DU2101, CNC lathe with main and sub spindle, featuring two 12-position turrets and double bar feeder. Make: EMCO, Model: TURN 332MC Plus Year of manufacture: 2006, Serial number: R2DU2101 Control system: Siemens Maximum turning diameter: 220 mm ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your requirements. Whether you prefer a down payment, installment plan, or individual financing model – together, we will find the solution that fits your needs. Upon request, we can also arrange complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so that you do not have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We provide personal and professional advice. Subject to prior sale, modifications, and errors! Dodpjyzn U Ejfx Anwjkl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S4ES_V16, CNC lathe with main spindle and 12-position turret Make: EMCO, Model: EMCOTURN E45 Year of manufacture: 2019, Serial number: S4ES_V16 Djdsyzn Tnopfx Anwokl Control: Siemens, type Sinumerik 828 Maximum turning diameter: 220 mm Chip conveyor: Manufacturer Bürener, type SPE62/12 ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product, but also tailored financing options to suit your needs. Whether down payment, installment payment, or custom financing models – together we will find the right solution. On request, we also take care of the entire transport organization. From planning to reliable delivery, we ensure a smooth and on-time process, so you don't have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding quote. We provide personal and competent advice. Subject to prior sale, modifications, and errors!

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R2EU2002, CNC lathe with main spindle and 12-station turret Manufacturer: EMCO TURN E45 Year of manufacture: 2002, Serial number R2EU2002 Control: Siemens, Sinumerik type Bar feeder: EMCO Compact Load E45 Turning diameter: 220 mm Chip conveyor: Knoll Attractive offer – flexible & hassle-free Dkedpfxeyzn N Ns Anwsl We offer not only a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. Upon request, we can also take care of the entire transportation process. From planning to reliable delivery, we ensure a smooth and on-schedule operation so you don’t have to worry about a thing. 📞 Feel free to contact us for more information or a non-binding quote. We offer personal and competent advice.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: R6L211501, EMCO Turn S65 TM – 2-axis CNC lathe with EMCO SL1200 short bar loader - 2-axis CNC lathe without tailstock, featuring driven tools and C-axis - 18 kW drive power - 0–4,200 rpm spindle speed - Linear guideway system - Digital drive technology - Direct spindle encoder - Sinumerik 828D with ShopTurn conversational programming Equipment - 12-position VDI 30 axial tool turret with direction logic for up to 12 live tooling stations (5 kW, 20 Nm, 0–5,000 rpm) - C-axis for main spindle - Mechanical spindle brake (minimum increment 0.01°) - Size 65 headstock with KK6 spindle nose (DIN 55026) - Hollow clamping cylinder incl. draw tube - Machine lamp - Coolant system - Hydraulic power unit - Interface for chip conveyor - Documentation Other features - EMCO SL1200 short bar loader ----- Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing solutions adapted to your needs. Whether down payment, installment plans, or individual financing models – together we will find a solution that fits. If you wish, we can also handle the complete logistics and transportation. From planning to punctual delivery, we ensure a smooth and reliable process, so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide personal and professional advice. ----- Subject to prior sale, errors, and changes. Djdpfx Anoyzn H Uewekl

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 865 kg, travel distance X-axis: 220 mm, travel distance Z-axis: 110 mm, spindle motor power: 5,300 W, welding current (max.): 500 A, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet, tools, tool cassettes, collets, and chuck. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Djdpeyxvqvsfx Anwekl Condition: very good, fully functional Location: Graz (Austria) Key Features at a Glance: - 1000 mm centre distance – ideal for longer workpieces - Infinitely variable speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guideways & gears - Electromechanical spindle brake - Very rigid construction – machine weight 865 kg - Safety monitoring via electrical limit switches - Fitted with a modern 3-axis digital readout Technical Data: - Centre distance: 1000 mm - Centre height: 200 mm - Swing over bed: 400 mm - Spindle bore: 50 mm - Spindle speed: 40 to 3000 rpm - Spindle mount: DIN 55029 size 5 - Drive power: 5.3 kW - Quill diameter: 50 mm - Taper: MK3 - Quill stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional Equipment: - Coolant system - 3-axis position display with 0.001 mm accuracy Scope of delivery: Machine including cabinet and various tools, tool cassettes, etc. (see pictures) Quality & Safety: The machine stands out for EMCO's typical 'Made in Austria' quality. Interested? Please feel free to contact us to schedule a viewing appointment or to request an offer.

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Djdpfeyxxhqsx Anwjkl

Condition: used, For sale is a used vertical machining center EMCO VMC 300. Equipment / Data: Manufacturer: EMCO Dsdpfxey D Ut Hj Anwekl Model: VMC 300 Year of manufacture: approx. 1990 Control: Siemens Sinumerik / 810M Travel paths: approx. X 420 / Y 330 / Z 400–450 mm Tool holder: SK40 Tool changer: 12 positions Table size (as with comparable models): approx. 850 x 325 mm Spindle speed (comparable units): up to 5,000 rpm Machine weight (comparable units): approx. 2,900 kg Contents of rack with various machine accessories are available and can be included by arrangement. Comparable VMC 300 machines are specified with a 12-station tool changer, SK40, table 850 x 325 mm, 5,000 rpm and approx. 2,900 kg weight. Condition: Used, typical for its age. Visual condition: see photos. Functional status: [Machine was operational until removal / tested under power] Therefore, sale is preferably to knowledgeable buyers. Scope of delivery: - EMCO VMC 300 - Siemens control - 12-position tool changer - Various accessories / contents of rack by arrangement Note: Inspection by appointment possible. Loading / collection by arrangement. Sale preferably to commercial buyers.