Used External Thread for sale (7,525)

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG Nljdpefnvvijfx Ancef (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Nljdpeuzhcuofx Ancjf Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders Nlsdpfjb A H T Dox Ancsf -with external thread: M 90 x 2 -Piston: Ø 55 mm -Max. stroke: 550 mm -max.: 700 bar

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation Njdjvnv Tqopfx Ancslf - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Nlsdpfx Aeh A S Htencjf Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, LATHE FOR WOOD TURNING For sale is a used lathe, model Drechselmeister Twister FU 200, with a center distance of 715 mm. The machine is in very good condition. Technical data: - Center height 200 mm - Swing diameter 395 mm (700 mm with optional external turning attachment) - Center distance approx. 715 mm (can be extended optionally) - Spindle connection M33 x 3.5 with ASR (Euro) drain safety groove - Spindle and tailstock taper MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel 100 mm (with trapezoidal thread), prepared for ER-25 drill chuck - Motor 1.5 kW / 2 hp (230 V connection) - Brake switch, 2-stage - Weight (standard version) 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Njdpjwudkiefx Ancjlf Shipping by freight forwarder: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT Related terms: Lathe, turning machine, wood lathe, turning, woodturning, turning tools, wood turning, machine Reference A0117

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Nedspag Npjpfx Ancjlf Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: Nodpfox H Szyjx Ancolf >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: new, Year of construction: 2026, CORMAK 660 × 2000 Universal Lathe The CORMAK 660 × 2000 Universal Lathe is a heavy-duty industrial conventional lathe designed for precision metalworking in manufacturing environments. Its robust construction, featuring a massive hardened bed and a powerful 7.5 kW spindle drive, ensures excellent machining stability, dimensional accuracy, and long service life, even under intensive production conditions. Key Features of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum operator safety while significantly reducing downtime by allowing fast and reliable machine stopping. Rapid longitudinal and cross feeds considerably reduce tool travel time, increasing machining efficiency and operator productivity. Versatile machining capabilities including external and internal turning, taper turning, thread cutting (metric, imperial, module, and DP), drilling, broaching, and polishing. Hardened and precision-ground 350 mm cast iron bed provides outstanding vibration damping and high machining accuracy. Large Ø105 mm spindle bore with D1-8 spindle nose allows machining of large-diameter shafts and workpieces. High-performance spindle drive with 7.5/9 kW motor delivers reliable power for demanding cutting operations. Wide thread-cutting range without changing change gears, saving setup time and improving production flexibility. 3-axis Digital Readout (DRO) enhances positioning accuracy and provides better control over the machining process. The machine body is manufactured from high-quality cast iron, providing a substantial machine weight of approximately 3,190 kg, ensuring excellent vibration absorption. The headstock is equipped with a reinforced bearing system for smooth and stable operation throughout the spindle speed range of 25–1500 rpm. A centralized feed gearbox, leadscrew, and feed rod enable precise thread cutting as well as automatic longitudinal and cross feeds. Standard Equipment 3-axis Digital Readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest Follow rest Coolant system Machine work light Operating manual (Polish/English) CE Declaration of Conformity Technical Specifications Parameter Value Swing over bed Ø660 mm Swing over cross slide Ø455 mm Swing in gap (diameter × width) 885 × 170 mm Centre height 330 mm Distance between centres 2000 mm Bed width 350 mm Maximum tool shank size 25 × 25 mm Cross slide travel 355 mm Compound slide travel 130 mm Spindle bore Ø105 mm Spindle nose D1-8 Nljdpfx Aoyk Dabencef Spindle taper Ø113 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–1500 rpm Leadscrew diameter × pitch Ø40 × 6 mm Imperial thread range 2–112 TPI (60 selections) Metric thread range 0.2–14 mm (47 selections) Diametral Pitch (DP) threads 4–112 DP (50 selections) Module threads 0.1–7 Module (39 selections) Longitudinal feed range 0.059–1.646 mm/rev (35 selections) Cross feed range 0.020–0.573 mm/rev (35 selections) Tailstock quill travel 180 mm Tailstock quill diameter Ø75 mm Tailstock taper Morse Taper No. 5 (MT5) Main spindle motor 7.5 kW (10 HP), 3-phase Coolant pump motor 0.1 kW (1/8 HP) Installation dimensions (L × W × H) 334 × 115 × 151 cm Packing dimensions (L × W × H) 340 × 115 × 182 cm Machine weight 3200 kg

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. Nljdpfxeznt I Io Ancef 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Nsdezp E Dkjpfx Ancelf Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm Nedor I S H Eopfx Ancolf * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Nsdpfx Aezqunhencjlf Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: used, This listing is for a CAB ER6 External Rewinder. The unit is in full working condition and is ready for immediate release. The CAB ER6/300 External Rewinder is a versatile and efficient label rewinding solution designed to work seamlessly with the Squix 6.3 label printer and other 6-inch label printers. Featuring a built-in power supply, it operates independently without requiring power from the printer, making it a universal and flexible option for industrial labeling applications. Key Features: 🔹 Compatible with Squix 6.3 and Other 6-Inch Label Printers – Ensures seamless integration and efficient operation. 🔹 Wide Material Support – Handles labels up to 180mm wide, accommodating various printing needs. 🔹 Large Roll Capacity – Supports label rolls with a maximum outer diameter (OD) of 300mm. 🔹 Dual Winding Modes – Allows labels to be wound inside or outside for greater flexibility. 🔹 Independent Operation – Built-in power supply eliminates dependency on the label printer. 🔹 Adjustable Core Size – Compatible with 44mm and 76mm cores for diverse applications. 🔹 High-Speed Rewinding – Maximum speed of 300 mm/s ensures fast and efficient label handling. Specifications: Compatible Printers: Squix 6.3 and other 6-inch label printers Material Width: Up to 180 mm Maximum Roll Diameter: 300 mm Winding Options: Inside or Outside Core Sizes: 44mm or 76mm Rewind Speed: Up to 300 mm/s Power Supply: Built-in (independent from printer) Dimensions: 350 x 340 x 390 mm Weight: 6.3 kg Benefits: Universal Compatibility – Works with various 6-inch label printers, ensuring broad usability. Enhanced Efficiency – High-speed rewinding improves workflow and productivity. Independent Power Supply – Eliminates extra load on the printer, reducing wear and tear. Flexible Winding Options – Supports both inside and outside winding, offering customized label handling. Large Roll Capacity – Handles big label rolls, minimizing downtime due to frequent roll changes. Applications: 🔹 Industrial Labeling – Ensures efficient label rewinding for high-volume printing. 🔹 Warehouse & Logistics – Helps streamline labeling processes for inventory tracking. 🔹 Manufacturing – Optimizes label handling for product identification and compliance. Nlsdoxxya Sspfx Ancsf 🔹 Retail & Distribution – Improves efficiency in product labeling and packaging.

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Click on the link below to see a video of the machine running. Nlodpjyhd Iysfx Ancof

Condition: new, Year of construction: 2026, CKT 560 × 1500 CNC Metal Lathe is a professional industrial solution combining advanced CNC technology with a robust machine structure, designed for production facilities requiring the highest standards of machining quality. This industrial CNC lathe enables a wide range of complex operations, including external and internal turning, spherical turning, threading, drilling, grooving, and contour machining. Key Features Exceptional machining accuracy – maximum swing over bed of 560 mm, swing over cross slide of 340 mm, and a 430 mm wide bed ensure high rigidity and precision during demanding operations. Njdpei Apf Tjfx Ancolf Flexible spindle system – spindle speed range of 100–800 RPM and a 75 mm spindle bore (optional 90 mm) with an A2-11 spindle nose allow machining of a wide variety of materials, from steel to lightweight alloys. Intuitive CNC control – Siemens Sinumerik 808D control system with Polish-language interface and Siemens servo drives provides a dedicated operating mode for conventional lathe users, reducing the learning curve for CNC operation. Rigid construction – with a net weight of 3600 kg and dimensions of 3770 × 1500 × 1900 mm, the machine provides excellent stability when machining workpieces up to 1500 mm in length. Efficient tooling system – an 8-position turret (optional 6-position) with 25 × 25 mm tooling enables fast tool changes and reduces production cycle times. Fast setup and adjustment – allows convenient tool setting, work zero positioning, and corrections without the need to write complete CNC programs, making it ideal for single-piece and small-batch production. Enhanced operator safety – controlled rapid movements and spindle speed limitations enable precise and safe machine operation. Extended component life – automatic lubrication of gears and guideways reduces wear and ensures long-term reliability. Optimized cooling system – maintains thermal stability and protects tools and workpieces during intensive machining. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries, for both serial and small-batch production. Energy-efficient performance – the 11 kW main motor provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring detailed G-code knowledge. Advanced automation options – available with hydraulic chuck, hydraulic tailstock, bar feeder, and chip conveyor systems. Machine customization options – available upgrades include Fanuc Oi-TF, Siemens Sinumerik 828D, tool probes, and CAD/CAM software integration. Standard Equipment Siemens Sinumerik 808D CNC control Siemens servo drives Manual 3-jaw chuck 8-position turret Complete set of soft jaws Manual tailstock Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual EC Declaration of Conformity Technical Specifications Specification Value Swing over bed 560 mm Swing over cross slide 340 mm Maximum workpiece length 1500 mm Spindle speed range 100–800 RPM Spindle bore 75 mm (optional 90 mm) Bed width 430 mm Spindle nose A2-11 Number of tools 8 Tool size 25 × 25 mm Tailstock taper MT5 Maximum tailstock travel 150 mm Main motor power 11 kW Machine dimensions (L × W × H) 3770 × 1500 × 1900 mm Net weight 3600 kg

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid. Njdpfxjxv A Rus Ancelf

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Njdpsykn Rdjfx Ancslf

Condition: like new (used), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: S2000BM-00308, turning diameter over cross slide: 360 mm, turning length: 540 mm, turning diameter: 360 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 600 mm, bar passage: 68 mm, Only 3 operating hours - the machine has not yet been used due to a project cancellation. New price: EUR 124,000 plus VAT. TECHNICAL DETAILS Max. swing diameter over bed: 510 mm Max. swing diameter over slide: 360 mm Max. turning diameter: 360 mm Max. turning length: 540 mm SPINDLE Spindle nose: A2-6" Bar capacity: 68 mm Max. spindle speed: 4,500 min⁻¹ Main spindle motor power: 15 / 18.5 kW C-axis: continuous TURRET Tool stations: 12 / BMT 55 Motorized tool stations: 3.7 / 5.5 kW Speed of motorized tool stations: 5,000 min⁻¹ Max. torque motorized tool stations: 16 Nm Indexing time tool turret: 0.15 s Tool holder for external tools: 25 × 25 mm Tool holder for internal tools: Ø 40 mm TAILSTOCK Tailstock mounting: MK 4 Tailstock type: programmable Tailstock quill stroke: 450 mm Tailstock quill diameter: 75 mm Tailstock taper: MT 8 Tailstock quill force: 5,047 Nm AXES AND FEEDS Travel X-axis: 210 mm (180 + 30 mm) Travel Z-axis: 600 mm Drive power X/Z-axis: 1.8 / 3.0 kW Guide rail inclination: 45° Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Ball screw X-axis: Ø 28 mm Ball screw Z-axis: Ø 40 mm ACCURACY Unidirectional positioning repeatability: 6 µm Positioning accuracy X-axis according to ISO 230-2:1988: 15 µm Positioning accuracy Z-axis according to ISO 230-2:1988: 15 µm MACHINE DETAILS Operating hours: 3 h Control system: FANUC 0i TF PLUS Connected load: 31 kVA Supply voltage: 380 V ±10 % Mains frequency: 60 Hz Phases: 3 Machine length without chip conveyor: 2,643 mm Machine depth: 1,560 mm Machine height: 1,920 mm Machine weight incl. chip conveyor and transformer: 4,000 kg COOLANT SYSTEM Coolant tank volume: 185 l Coolant pump output: 0.5 kW Coolant flow rate: 20 l/min Coolant pressure: 5.0 bar EQUIPMENT - FANUC 0i TF PLUS CNC control system Nodpfxozpwmqj Ancslf - CE conformity - IndustryNet4 connection: remote maintenance, remote monitoring and Industry 4.0 requirements. - Manual Guide i (MG-i) - Preparation for tool force monitoring - 10.4" color LCD monitor - Electronic handwheel - USB interface - Ethernet interface - RS-232 interface - Memory card slot - Manual tool measurement - Parts catcher - Hydraulic 3-jaw chuck, Ø 200 mm, bore 68 mm - Rigid threading - Control cabinet with heat exchanger - Automatic coolant system with 4.5 bar pressure - Central, time-controlled lubrication system - Cooling system for the hydraulic unit - Belt-type chip conveyor with right-hand discharge - Electrical and electronic preparation for bar loader - Internal machine work light - External machine status indicator

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Nledpfjzun Hlox Ancof Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Nsdpfx Asy Ryrnoncjlf Specifications: Capacity: 13,400 L

Condition: used, Year of construction: 1999, Technical details: Nedpfx Aoyw Hmfsncjlf turning diameter over bed: 430 mm turning dia. over face-slide: 210 mm turning length: 510 mm facing movement (x-axis): 150 - 160 mm longitudinal traverse (z-axis): 300 - 510 mm control: Fanuc 21T revolution per minute: 6300 U/min max. torque on the spindle: 17,5 Nm external spindle dia. in forward position: 45 mm tool turret - number of stations: 8 Main spindle capacity: 11 kW electrics - voltage/frequency: 400/50 V/Hz total power requirement: 17 KVA Weight approx.: 2,4 t dimension machine approx.LxWxH: 2,2 x 1,4 x 2,0 m The EMCO TURN 345 is a compact, high-performance CNC lathe designed for the precise machining of individual parts as well as small and medium batch production. It is characterized by its robust construction, high reliability, and ease of operation. Equipped with the proven Fanuc Series 21-T control system, the machine offers precise and stable process control as well as simple programming using standardized G-code. Interface for bar feeder available *

Condition: good (used), Year of construction: 2018, operating hours: 9,789 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 9,789 km, Electric duplex forkliftBrand: Still (Germany)Year of manufacture: 2018Capacity: 5,000 kgLift height: 4,080 mmOverall height: 2,850 mmEquipped with: SIDESHIFTEquipped with FORK SPREADER9,789 operating hoursFork length: 2,200 mmBattery from 2018 with external chargerWatch the video on YouTube Nledpfxsywamro Ancjf

Condition: new, Steinmeyer ball screw, Ø thread: 14 mm, pitch: 10 mm, Ø pin: 9 mm, Ø shaft: 25 / 20 / 15 / 12 mm, length shaft: 1710 mm, Ø ball cage: 39 mm, Ø flange: 62 mm, unused, 100% functional, scope of delivery as per photos Nedpfezu Hbbjx Ancelf

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Nedpfszu Htdsx Ancelf