Used Ferromatik 250 for sale (9,772)

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- Klsdpfxjvzkyle Ab Tjn 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Kljdpfxsw Hc Spo Ab Ten Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Ksdpfswzvzyox Ab Teln Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Kodpfxoln Ulae Ab Tsln Weight 8,5 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 4,108 h, functionality: fully functional, machine/vehicle number: 591343, clamping force: 1,550 kN, An injection molding machine of the Ferromatik brand and type K-TEC 155 S / 2F is for sale. The machine is in very good condition. Please note the low operating hours of only 4,108 h Technical data: Year of construction: 2005 Clamping force: 1,550 kN Clear column distance (H. x V.): 500*500 [560*560] mm Mold opening stroke: 650 mm Platen distance max.: 950 [1150] mm Tool installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Injection pressure max.: 1568 bar Max. stroke volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Weight: 7,800 kg Oil tank capacity: 480 l Ksdpfst Tdptjx Ab Toln On request, loading onto trucks and transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 1991, functionality: fully functional, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Kljdpfsu Dxb Tex Ab Tsn Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Kjdsx D Rwrjpfx Ab Teln Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine elektrisch mit Angußpicker Hersteller: FERROMATIK Typ: EE50-55 ELEKTRA 50 evolution Baujahr: 2012 Schließkraft: 50 Tonnen Holmabstand 320 x 320 mm Schnecken DN: 22 mm Dosiervolumen: 29 ccm³ Spritzteilgewicht 26 g/PS Steuerung: MOSAIC Ausstattung: -1 x Kernzug -Angußpicker, Hersteller: WITTMANN, Typ: W702, Baujahr: 2012 Klodpfx Aoxpnc Aob Tjn

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Ksdpetwdviofx Ab Tjln Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm Kedpewav R Ssfx Ab Tsln voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Kjdovzqyfspfx Ab Tsln Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Plate: Width below 250 mm Kjdpfx Aedd Tpiob Tjln Less than 500 mm length Opening width 250 mm Weight 72 kg

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar Kledpecud Nhjfx Ab Ten 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Kodpfjw Ebpwsx Ab Toln Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK Kljdpfxex N A Dwo Ab Ten

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Ksdpfx Aougtv Ieb Teln Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: ready for operation (used), Technical characteristics Power and Motors Power: 1.5 Kw Overall dimensions Kledpfxetv Tkys Ab Tjn Lenght: 560 mm Width: 730 mm Height: 410 mm

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Klodpfx Ajhktq Asb Ton Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: used, Year of construction: 1991, operating hours: 2,000 h, Name: Used injection molding machine Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year built: 1991 Hours of operation: 2000 h Driving force: 15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Empty weight: 3400 kg Technical doc.: Yes Klsdsxl R Sxspfx Ab Tsn Message: General Data: Dry cycle rate: 40 min, Pump drive: 15 kW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Displacement: 116 cm3, Screw stroke: 120 mm, Maximum part weight: 99 g, Maximum injection flow: 505 g/s, Calculated injection capacity: 15 kW, Plasticizing flow: 29 g/s, Screw length: 22 LID, Maximum screw speed: 430 min, Maximum screw torque: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle compression force: 65 kN Clamping unit: Clamping force: 500 kN, Mold opening stroke: 350 mm, tool installation height min.: 200 mm, platen distance max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm. Accessories: With two tool tempering devices. Condition: Second hand Price: By request

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) Klodpfxev Uqwdo Ab Ton - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 9550006, bending force (max.): 254 t, stroke length: 265 mm, overall weight: 18,900 kg, working length: 4,100 mm, TECHNICAL DETAILS Working length: 4,100 mm Pressing force: 2,500 kN Max. stroke: 265 mm Rapid traverse speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Electrical data Main motor power: 22 kW Kodpeylv T Nefx Ab Tjln Total connected load: 26 kW Line voltage: 3 PH 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current: 63 A Weight: 18,900 kg EQUIPMENT Bending aid

Condition: as good as new (ex-display), power: 129 kW (175.39 HP), fuel type: diesel, color: red, Year of construction: 2023, operating hours: 18 h, Equipment: air conditioning, General information Field of application: Construction Applicable material: Waste Serial number: 252M301318 Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: Cummins Weights Empty weight: 26.400 kg Functional CE mark: yes Klodpox I U Tbofx Ab Ten Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Tyre size: 10.00-20/7.50 Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5,025x2,5x3,11 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, diameter 250 mm bore 65 mm Kledeyl Nn Hspfx Ab Tjn Machine dealer with own stock of 1600 m².

Year of construction: 1999, condition: reconditioned (used), Table dimensions: 1200 x 550 mm Stroke X: 1020 mm Stroke Y: 510 mm Stroke Z: 460 mm Spindle speed: 35-25000 rpm Ksdpfx Ajfci Dgeb Teln Number of tools: 30 Spindle cone: HSK 63 Spindle center coolant Measuring tool Chip conveyor