Used Finger Jointing Line for sale (11,281)

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Ljdpfx Aswuzzfsfzjrg Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Max length workable: 2600 mm Max height workable: 1300 mm Lsdpex A Hfpsfx Afzorg

Condition: used, Year of construction: 2009, NP 694 | COMPLETE BOTTLING LINE PET 72,000 BPH Product: Still Water Speed: 72,000 BPH at 0.5 l Year: 2009 Cap: Corvaglia 29/26 Tanner Preform Hopper KHS Triblock Preform Elevator Preform Orientator PET Blower: Model: Blowmax 36S Series IV Compressor: AF Chiller: Riedel CIP: KHS Filler: 100 valves - mechanical Filling type: Gravity Capper (including elevator and cap orientator) Lrodpfx Ajx Tfr Eefzjg Workable cap type: Pre-threaded plastic Cap size: Corvaglia 29/06 Cap distribution system: pick & place Labeller: PE Model: Simple cut KS177 Rotation direction: counterclockwise Electronic cam plates Roll feed station Bottle inspector: Presco Model: intellispec Conveyor belts: KHS Shrink Wrapper: KHS Model: Innopack Kisters TSP Version: film launch Palletizer: Alvey 942 Type: push Pallet storage Pallet wrapper: Lantech Model: S1500 Wrapping type: Rotating arm Pre-stretch

Condition: used, Year of construction: 2008, NP 693 | COMPLETE PET BOTTLING LINE Product: Still Water Output: 43,000 BPH Year: 2008 Cap: Corvaglia 29/26 Tanner Preform Hopper Preform Elevator Preform Orientator PET Blower: Model: Blowmax 24 Compressor AF Riedel Chiller KHS CIP KHS Innofill-NV PET Filling Monoblock Filler: 60 valves – mechanical Filling type: Gravity Capper (with elevator and cap orientator) Cap type: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labeler PE Year: 2021 Model: Simple cut flex CI 1120 30 Rotation direction: counterclockwise 30 electronic cam plates Roll feed station Bottle inspector Conveyor belts Douglas Shrink Wrapper Year: 2007 Model: m-75 Version: film launch Alvey 880 Palletizer Year: 1999 Type: Push System Pallet storage Lantech Pallet Wrapper Model: S1500 Wrapping type: Rotating arm Ledpfx Afsx Tfq Uezsrg Pre-stretch Code: NP 693

Condition: used, Year of construction: 2019, NP 692 | COMPLETE BOTTLING PET LINE KHS Product: Still water Speed: 70,000 BPH Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock PET Blower Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Model: Innopack Kisters TSP Version: film launch Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Lredpfjx Tfqzex Afzog Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Lrsdjrn Sqhjpfx Afzog Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Lrsdpfx Ajlwtzyofzjg Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Lredpjixqg Nefx Afzsg Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Ledpfx Aeihf Ufjfzjrg Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Coil Width: 12″ – 60″ Lredpfx Afjihf Tpozeg Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Ledpfx Afsihf Twozsrg Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Lredjwu Agcopfx Afzjg Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Year of construction: 1980, sheet width 1000 mm plate thickness 125 mm Lrodswz Rvxepfx Afzeg

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Lodpfeyanx Tox Afzjrg Specifications: Capacity: 1,320.9 gal Internal pressure: 96 PSI Jacket Pressure: 95.9753 Material of Construction: Glass lined steel

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Ljdpfx Ajrq Eawsfzerg

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm max thickness: 3 mm steel Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Work mode: Roll forming unit Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes Lrodpfsycmqmjx Afzeg

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Lsdpfxjvptt Rj Afzsrg

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery  Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors Lrodpfx Afsvm U Dlszog

Condition: used, Year of construction: 2000, Used Rondo line. Lrjdpex Swucsfx Afzog

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Lrodpevryhyjfx Afzjg Battenfeld R200/6 Battenfeld V125

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Ljdpfx Afjx U Ay Njzsrg Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Lodeyb Tuijpfx Afzjrg

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series Ljdpfx Ajyb Tucjfzsrg

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc): 16 rinsing heads 16 filling heads 1 crowning head Scope of Delivery  Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts DE filter | Spadoni | - | 2011 | 80 hl/h Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules   Lredpfx Ajyb Tkdsfzsg

Condition: used, Year of construction: 2016, Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 30 cartons/min Carton erector & lidder: 23.5 cartons/min Changeover time Format change: approx. 15 minutes Formats / packaging specifications Format 1: 12-jar tray, 2 layers, 350 g jars Format 2: 6-pack tray, 2 layers, 720 g jars Format 3: 6-pack tray, 2 layers, 580 g jars Format 4: 6-pack tray, 2 layers, 1,000 g jars Format 5 (mixed formation): Combination of different jars, automatic mixing via separate belts Operating hours: approx. 5,000 (of which approx. 2,000 are pure production) Power supply Electrical: 3x 400 V / N / PE, 50 Hz Pneumatic: min. 6 bar – max. 12 bar, oil-free, residual oil content max. 0.1 mg/m³ (ISO 8573-1 Class 2) System components Buhmann C300 carton erector (wrap-around trays) Buhmann PF800 packing unit Yaskawa robot with gripping units 2x Nordson PROBlue 4 gluing devices Separate feed belt for offline products (mixed cartons) Carton sealing unit Ljdpeyb Snbsfx Afzerg