Used Hexagon Metrology for sale (264)

Condition: good (used), We offer here II. Choice post protector of the manufacturer SSI Schäfer for sale. Included in delivery are: 01x post guard, II. choice Material color: yellow Finish: V Total height: approx. 400 mm total width: approx. 112 mm inner width: approx. 104 mm total depth: approx. 60 mm leg dim.: approx. 65 x 65 mm Crodpfx Ahohr U S Us Usi material thickness: approx. 4 mm grid/ hole spacing: approx. 250 mm Number/ holes: 04 pcs. (02 pcs./ side) Hole Ø: approx. 9 mm 04x hexagon head screw: M8 x 35 mm 04x Toothed nut: M8 04x washers: M8 General information about the item: This item is offered for pickup only. A beyond that desired transport or shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, overall weight: 3,500 kg, empty load weight: 2,900 kg, maximum load weight: 600 kg, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, number of seats: 3, fuel: diesel, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane immediately available, the vehicle is for rent with purchase option. Chassis: Fuso 3S15 Canter - Total weight 3500kg, payload finished vehicle with loading crane and aluminum platform approx. 600kg - Manual gearbox - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling ball head 3500kg with E-set (factory-fitted) - Heated exterior mirrors - Automatic air conditioning - Radio preparation - Reversing alarm - Power take-off with speed increase - Battery cover and adbluetank cover - Preparation for battery cut-off relay - Continental 195/75/R16C traction tires - Seat covers Aluminum platform: - Inside:2720mm x W 1820mm x H400mm - Floor plate 18mm - Floor frame with airline rail all around - Airline rail also in the front wall - Anodized aluminium side walls with folding step, easily removable - Storage box - Work lights - other platform dimensions also possible Loading crane: 35.3 with 3 x hydraulic extensions (country of manufacture: Italy) - Lifting capacity according to manufacturer: 2.75m=995kg, 3.11m=885kg, 4.44m=600kg, 5.77m= 450kg 7.0m= 355kg - Mechanically extendable cross beams 3, 7 m - Loading crane controllable on both sides, no radio (loading crane with radio optionally possible) - 2 outriggers with mechanical vertical lifting system lifting system L=910 mm - Swivel with cylinders and rack 400° - Mechanical swivel limitation front area - Hexagonal articulated arm and extension arms - Double-acting cylinders, with pilot operated with pilot operated stop valves - Independent extension cylinders - 12 V. system - Pressure gauge - Oil tank mounted on crane with 30 l return line filter - Rotating load hook - Dead center over the outriggers (is not tilted) - Painting with epoxy primer and finish Two-component or powder coating Csdpfxjulaiae Ah Uori -Support plates - Articulated support plates (2 pcs.) for outriggers - CE version - Optional: reversing camera with Carplay, spade holder, 90° cable, additional storage box available Subject to errors and prior sale. ... Air conditioning, Klimatronic, VAT refundable, ABS, electric WFS, central locking with remote control, trailer coupling, power steering, spare wheel, cab: close-coupled, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/internal/external), particulate filter, for hire, emissions sticker: 4 - green

Condition: used, Year of construction: 2012, Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Cedok Abfuopfx Ah Ujri Transport dimensions: L x W x H = 705 x 570 x 130 mm For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2025, tube diameter 10.0 - 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 1.30 U/min voltage 400 Volt Crsdpfsxab Hvsx Ah Uji total power requirement 1.5 kW weight 110 kg range L-W-H 400 x 450 x 570 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1" 1/4" Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Cjdexaigwspfx Ah Uori

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Crsdpfx Ahsu Impyo Uji Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, neu ca. 2 Wochen ab Auftragse Niederlande 4417 € 100 x 2.000 mm 20 - 76,1 mm 1 1 3 kW 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Crsdpfx Aswir Dmeh Uei Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Optical overlay metrology system, Advanced Semiconductor Materials Lithography stand-alone overlay metrology system for 300 mm wafers, YieldStar S 200B Model: S200B Type: YieldStar Year of manufacture: 2011 Technical data: Wafer size: 300 mm (12") Laser source: LPPS, water cooling General information: Crsdsxbnt Eopfx Ah Uji The YSS200B is an optical overlay measurement system used for fast and highly precise measurement of overlay deviations on 300 mm wafers – typically for post-etch monitoring and production process control as a stand-alone system.

Condition: used, mileage: 23,233 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Chassis front design: Floor plate Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Cedpfxexitmgo Ah Usri Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Condition: used, Year of construction: 2025, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl Credexabu Hopfx Ah Uoi tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: Codpfx Aswbvhaoh Ueri ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: new, table length 1200 mm table width 700 mm table height 900 mm table load capacity 250 Kg weight of the machine ca. 36 Kg dimensions 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket Crjdpfovxw Hysx Ah Usi - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 39500 € 754.45 € 127 mm 850 mm 1200 mm 850 mm 720 kg 80 cm³ 127 x 7,1 mm 4" x 8,56 mm 127 x 7,1 mm 114,3 x 5,6 mm 114,3 x 5,6 mm 139,7 x 8,8 mm 139,7 x 8,8 mm Csdowirvispfx Ah Ueri 64 x 6 mm 88,9 x 3,65 mm 50 x 4 mm 90 mm 130 x 25 stehend, 130 x 6 mm 700 mm 36 mm 10 mm 0 - 0,75 U/min 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request

Condition: ready for operation (used), Year of construction: 2022, This ZEISS Metrotom 6 Scout was manufactured in 2022. A fully maintained demo CT inspection and metrology machine, it was primarily used for presentations, featuring a low X-ray on time of 789.5 hours. The ZEISS METROTOM 6 Scout digitizes complex parts, including internal geometries, with the most advanced level of detail. The result is a complete 3D image for GD&T analysis or comparisons of objective and real-world data. The CT metrology system is an excellent choice for digitizing small plastic parts. Ideal for precise measurements, it can be checked onsite. Contact us for more information. Crsdpoxbul Isfx Ah Uoi Application Types Measuring

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Crjdpfxei D D Efs Ah Uei Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: as good as new (ex-display), Year of construction: 2022, tube diameter 2" x 3.91 mm GAS tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU bar material - diameter 35.0 mm revolutions per minute 2.0 U/min radius min. 2 x D mm bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 400 V total power requirement 1.5 kW weight 141 kg range L-W-H 470 x 1050 x 640 mm Demonstration/demo machine (!!) From our showroom (like new) Cjdpfx Aoxaa N Ajh Usri With very few operating hours Current new price approx. €9.000 Special price upon request Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Year of construction: 2021, operating hours: 3,571 h, condition: excellent (used), functionality: fully functional, ZEISS GOM ATOS 5 – Measuring Volume 700 High-precision 3D scanner for industrial metrology Technical Specifications & Equipment: • Model: ZEISS GOM ATOS 5 • Measuring volume: 700 × 530 × 520 mm • Year of manufacture: 08/2021 • Operating hours: 3,571 h • Light source: Blue Light Technology (LED) • High resolution & speed for large components • Software: 2021, 2022, 2023, 2025 GOM Inspect Pro with valid license • Ongoing Software Maintenance Agreement until 31/03/2026 • Accessories: Calibration plate, cables, transport case, PC Condition & Maintenance: • Regularly used in production • Fully operational Crjdpfx Ahsxfi Tuj Usi • Calibration report can be provided on request Info: • Additional measuring volumes available on request Location: Schönheide Availability: Immediately, lead time 2 weeks Inspection & test measurement possible by arrangement. Transport / training / re-calibration can be arranged.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4" inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8" inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2" inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Crodpfx Ahou Img Se Uoi Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth sockets M8,M10,M12 Five Star Nuts TS10,TS15,TS20,TS25,TS27,TS30,TS40,TS45,TS50 - Accessory 3/8" inch ratchet: Attachment for bits Torx nuts without bore T40,T45,T50,T55,T60,T70 Torx nuts with bore TT40, TT45, TT50, TT55, TT60, TT70 Imbus Nuts – H7,H8,H10,H12,H14 Slotted nuts SL8,SL10,SL12 Cross nuts PZ3,PZ4, PH4,PH8 - Accessory 1/2" inch ratchet: Snack H14,H17,H19,H22,H24 Snack H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 short essay, long essay, medium essay, Torx T30,T45,T50, allen key H7 + Drawer 3: - open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring wrench set 8 pieces 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision engineering screwdriver Slot: SL3.0 x 100mm, Cross : PH0 x 100mm - Screwdriver with soft grip and external hexagon: Slot: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8x150mm Cross : PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7x80 ; T8x80 ; T9 x 80 ; T10x80 ; T15x100 ; T20x100 ; T25x100; T27x100 T30x100 ; T40x150. + Drawer 5: - T-handle imbus / hexagon set with ball head: 3 x 115mm; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + drawer 6 - Circlip pliers set inside/outside 4 pieces, 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle nose pliers, curved needle nose pliers, pipe wrench. - Claw hammer, grain 3mm,4mm,5mm,6mm,7mm,8mm.

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 29100 € 555.81 € 100 mm 500 mm 1200 mm 850 mm 480 kg 43 cm³ 100 x 6 mm 3" 1/2 x 4 mm 100 x 6 mm 100 x 3,6 mm 100 x 3,6 mm 114,3 x 6,3 mm 114,3 x 6,3 mm 114,4 x 6,3 mm 88,9 x 3,65 mm 100 x 5 mm 70 mm 100 x 25 stehend, 100 x 5 mm 400 mm 36 mm 10 mm 0 - 1,3 U/min 3.5 kW Csdpfx Ajwirvcjh Uori quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Codpfewb Hygsx Ah Uori Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 Suitable for large cutting lengths, e.g., in kitchen construction or for floorboards Compact footprint and highly versatile applications Quick conversion between double mitre cuts and cross-cutting Robust cast iron pivoting arm with replaceable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit swivels 45 degrees to both sides Motor equipped with mechanical brake Aluminium stop as standard Roller conveyors, one meter long each, available as optional accessories for both sides Technical Data Dimensions and Weight: Length approx. 2110 mm Width/Depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Extraction port connection: Saw blade guard extraction port Ø 60 mm Electrical Data: Rated voltage 400 V, frequency 50 Hz Motor drive power 4 kW Sliding Table and Work Table: Table length 2060 mm Table width 1320 mm Noise Emission: Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular Saw Unit: Saw blade tilt -45° to 45° Pivot angle of saw arm -45° to 45° Max. cutting height 45°: 570 x 120 mm Max. cutting height -45°: 470 x 120 mm Max. cross section: 900 x 20 / 855 x 80 mm Max. cutting height 0°/45°: 120 / 83 mm Cjdpfxew I Uq Ss Ah Usri Saw blade diameter: 400 mm Saw blade bore diameter: 30 mm Saw blade speed: 2800 rpm Location: Solingen Availability: Upon agreement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Crjdpfxewirqte Ah Uoi Niederlande 7168 € 138.34 € 1 150 x 2.000 mm 20 - 114,3 mm 1 1 4 kW 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm (sample photo)

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 9340 € 180.26 € 48 mm 570 mm 410 mm 1000 mm 110 kg 6 cm³ 48 x 3,5 mm 1"1/2 x 3.68 mm 54 x 1,5 mm 50 x 4 mm 48 x 2 mm 48 x 2 mm 60 x 3 mm 64 x 2 mm 64 x 2 mm 60 x 2 mm 50 x 4 mm 32 mm 45 x 16 stehend, 45 x 25 mm 300 mm 10 mm 10 mm 2/3 U/min 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): . maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2" (21,3 mm), R46 Ø 3/4" (26,9 mm), R56 Ø 1" (33,7 mm), R67 Ø 1" 1/4 (42,25 mm), R90 Ø 1" 1/2 (48,25 mm), R100 . Cjdpfxewirlks Ah Uori maschine tube radius SB 48M K3D SB 48M Gas inch 3 x Ø SB 48T K3D SB 48T Gas inch 3 x Ø tools: Ø 1/2" (21,3 mm), R67 Ø 3/4" (26,9 mm), R82 Ø 1" (33,7 mm), R112 Ø 1" 1/4 (42,25 mm), R130 Ø 1" 1/2 (48,25 mm), R150

Condition: new, neu ca. 8 Wochen ab Auftragse Italien Csdpfxswiq Nhj Ah Uori 14020 € 269.18 € 76 mm 370 mm 680 mm 910 mm 193 kg 15 cm³ 76 x 3 mm 2" x 5,4 mm 76 x 3 mm 70 x 4 mm 76 x 1,6 mm 76 x 4 mm 76 x 6 mm 76 x 6 mm 76,3 x 3,25 mm 50 x 4 mm 45 mm 75 x 15 stehend, 75 x 30 mm 380 mm 10 mm 10 mm 1/2 U/min 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included

Condition: used, Year of construction: 2019, gebraucht 2019 5505 prompt, Zwischenverkauf v Niederlande 2670 € 1 100 x 2.000 mm 20 - 76,1 mm Csdpfswiqwlox Ah Uori 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm