Used Holzher 1225 for sale (171)

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge bander (for laminated boards): Dedpfx Asz I R Snsk Aecp Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Adhesive technology used: EVA hot melt adhesive in granular form (GlueJet, interchangeable station), L-Tronic laser (interchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), edge rounding unit (2 motors, CNC-controlled), sanding units (profile and flat), infeed system (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edging thickness: 15 mm Maximum edging thickness in roll form: 3 mm Maximum edging height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece infeed height: 877 mm Machine weight: 4200 kg Electrical minimum connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electric height adjustment: YES Top conveyor belt pressure unit: YES Maximum feed rate: 25 m/min Infinitely adjustable feed rate: YES Preheating zone: YES Spray nozzles: YES Machine documentation: YES Operating hours: 8,788 h Total number of edged panel sides: 1,138,998 pieces Total length of edged material: 966,123 m Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Dodpfxeytp Hrs Ak Ascp

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit • Gluing unit • Roller magazine for roller edges • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min Djdpfx Aez R A U Ijk Aecp • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling • Glue application • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dcjdpfxezt Twye Ak Asp Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Dcedjzt Twtspfx Ak Aep Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has only a few operating hours. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamping devices; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. clearance) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in the X-direction without clamping: X = 1500 mm Max. contour milling dimension in the Y-direction: Y = 985 mm ./. milling cutter radius Max. drilling dimension horizontally in the X-direction: H = 1168 mm Z-axis travel: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling head 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearings (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic Max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y direction, only for special bevel gear 7869 with HSK holder Vertical spindles can be individually activated Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Dedpfoz In Ugox Ak Ajcp Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: Alternating clockwise/counterclockwise n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - interference fit 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Holder: M 10 thread, interference fit 11 mm Total drill length max. 63 mm from the mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis "CLAMEX" tool set - Includes original tool set consisting of 2 pcs. P-system grooving cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling mandrel for P-system grooving cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling mandrel for P-system grooving cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders Drilling unit: Drill Ø5, 6, 8 mm 35mm pot band 20mm countersink Drill horizontally + vertically: 8mm Milling cutters: 8mm Dia NL32mm 16mm Dia NL43mm 16mm Dia NL9mm 20mm insert NL55mm

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm - Lath grid 100 mm Workpiece support: Dodpjzzfr Ejfx Ak Aocp - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Dcjdpett S D Rsfx Ak Ajp Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: used, Year of construction: 2014, Processing length 3200 mm. Vertical machining center for drilling, milling, and grooving. Maximum flexibility and versatile applications with minimal space requirements. Modern industrial design, built with high-quality components, offering an optimal view of the machining process and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides. Ball screw spindles in the X, Y, and Z axes for precise positioning and perfectly fitting workpieces. Workpiece-friendly clamping system using vacuum cups with automatic cup positioning. Extremely short setup times. Workpiece fixing on the back allows machining of the entire circumference without additional re-clamping (up to workpiece lengths of 1300 mm). This ensures the fastest machining cycles and the highest accuracy. Program-controlled adjustment of workpiece thickness; material thicknesses from 8 to 70 mm are possible. 1 machining field with length stop. Material support. 1 roller track for supporting the workpieces downwards. 4 roller tracks for gentle support of sheet material. Height-adjustable infeed roller track for 4-sided milling. Complete finishing of the workpieces through precise milling of all 4 workpiece edges. Extraction: Machining head extraction with extraction nozzle Ø 120 mm and extraction nozzle in front of the drilling head Ø 140 mm, both leading upwards. Underfloor extraction with extraction nozzle Ø 120 mm; connection at the bottom on the left side or from the top of the machine. Safety guard according to CE standard. Enclosing guard with viewing window and safety interlock on the door. TECHNICAL DATA Workpiece size: X = 200 - 3200 mm (longer with additional support); Y = 70 - 920 mm. Material thickness: Z = 8 to 70 mm. Max. travel in X-direction without reclamping: X = 1500 mm. Z-travel: Z = 240 mm. Maximum programmable speed: Vector speed: 68 m/min; X = 25 m/min, Y = 60 m/min, Z = 20 m/min. MACHINE OPERATION / SOFTWARE CAMPUS V6 - Single Evolution. Software for CNC machines of the Evolution type with automatic generation of the division of workpieces for machining. 1 software license for the machine - secured via a license plug. Consisting of: 1. CAMPUS NC-HOPS; 2. CAMPUS aCADemy; 3. CAMPUS MT-Manager; 4. CAMPUS Workcenter; 5. CAMPUS process simulation. CAMPUS NC-HOPS: Graphical variant system with WOP and CAD/CAM features for creating part variants and macro technology. CONTROL PC control. Remote maintenance: Integrated network card for data transfer of control and program data. Data transfer takes place via a high-speed internet connection. Requirement: High-speed internet connection at the machine. The use within the warranty period for warranty cases is free of charge. 19" flat screen for easy and clear machine operation. USB port for data backup or for direct input of machining programs at the control panel. DRILLING UNIT Drilling unit 7883, 15 spindles. Drive power 1.7 kW. 9 vertical spindles, individually selectable. Arrangement in L-shape, 5 in X and 4(5) in Y direction, 32 mm pitch. Max. drilling diameter: 35 mm. Total drill length: 70 mm from the mounting end (depending on plate thickness). Spindle extension stroke: 70 mm. Rotation direction: Alternating right/left. n(max.) 1000 - 4400 min-1, continuously adjustable. Mounting: M 10 thread - 11 mm smooth shank, without tool, without chuck. 6 horizontal spindles. 2 double drilling spindles in X direction. 1 double drilling spindle in Y direction. Mounting: M 10 Dcjds Ahhmbopfx Ak Ajp

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Djdpfszu T Sgjx Ak Ajcp Condition: Functionally tested Equipment: Base machine Extendable boom Joint milling unit 1801 Edge feed system, fully automatic 1903 Glujet 201 adhesive application system, cartridge Printing unit 1912-3, pneumatic Cutting unit 1918 Combination milling unit FR201 Pulling blade unit 1929 Chip collection box Surface pulling blade 1964 Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 340-0 / 511, functionality: fully functional, Machine available from November 2026 Sold on behalf of a customer Workpiece length min. 180 mm Workpiece width min. 60 mm Edge thickness (coil stock) 0.4 - 3 mm Edge thickness (strip stock) max. 15 mm - Multi-edge magazine (Ostermann) - 1888 Control panel - Motor-adjustable infeed guide, PLC controlled - 1961 Pre-milling unit - 1901 Edge magazine, fully automatic - 1905 Glue station for granules & cartridge with storage hopper Processing of EVA & PUR adhesives - 1913 Pressing unit with pneumatic, adjustable pressure. Adjustment based on edge thickness, motor-driven, PLC controlled - 1918 Trimming unit 2, motor-driven, pneumatic adjustment 0 - 12° - 1823 Flush trimming unit, up to 15 mm - 1942 Multi-milling unit, flush, chamfer, radius, pneumatic - motor-driven, PLC controlled - 1983 Corner rounding unit - 1929 Radius scraping unit - 1964 Surface scraping unit - 1940 Buffing unit - 1856 Spraying system, front for release agent, rear for cleaning agent - Extendable support Djdpfx Akoz Hpi Ae Aecp - Dimensions L/W/H 5920 / 1250 / 2170 - Weight approx. 1825 kg

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: 919/2-602, functionality: fully functional, operating hours: 7 h, Equipment: CE marking, documentation/manual, HOLZ-HER, STREAMER 1057 XL Classic, year of manufacture 2026, showroom machine for sale. Technical data Machine type: Edge banding machine Model: HOLZ-HER STREAMER 1057XL classic Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 6 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Workpiece length: min. 160 mm Feed rate: 10 m/min Voltage / Frequency: 400 V / 50 Hz Machine configuration & equipment Control system: Edge Control BC 15 with 15.6" touchscreen (color display 16:9, network-enabled, password-protected) Setup system: VISE (Visual Setting Mode) – digital logbook for setting values and digital counter Infeed area: Retractable workpiece support (distance 600 mm) Long infeed fence (1252 mm) BS501 guide system for right-angled feeding of narrow parts Jointing unit: FG201 with 2 milling heads (co-rotating/counter-rotating), incl. diamond-tipped milling cutters (Ø~70×48×30 mm) and Air Stream system Edge feeder: MG301 for roll and strip material with support plate (Ø~820 mm) Glue application system: Glu Jet GJ301 (hybrid technology for EVA and PUR adhesives in cartridges and as granules, fast heating within 3 minutes, automatic regulation of glue height and automatic refill function) Pressing unit: DW201 pneumatic (1 driven roller, 2 conical pressure rollers) Trimming unit: KA501 pneumatic (2×0.45 kW, pneumatically swiveling 0 - 10°) Multi-function milling unit: FR201 (2×0.6 kW) Dodpfxs Agnlls Ak Aocp Profile milling unit: FF201 (1×0.35 kW) Finishing: Scraping unit ZK301 (with 2 supports and digital displays) Surface scraping blade FK702 Lighting: LED lights (3 pcs) for the infeed and processing area

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Functionally tested Equipment and technical data: Cutting length: 4,300 mm Cutting height: 2,200 mm (edge trimming height 2,100 mm) Saw unit 4 kW TRK device Dedj Adv Rzjpfx Ak Ajcp Manual length stop Middle support, fold-out, continuous Location: NRW (North Rhine-Westphalia) Availability: Short-term

Condition: used, Year of construction: 2021, functionality: fully functional, For Sale: Premium Holz-Her 1329 Multi Edgebander + Return-Master 5920 We are selling a high-end Holz-Her 1329 Multi edgebanding machine, including the Return-Master 5920 return system. The unit is 4 years old and in excellent condition. Original New Price: €138,000 + VAT Dodpfoygrghex Ak Aocp Our Price: €69,000 + VAT (50% savings) Why choose this machine? Get a premium, lightly used machine for the same price as a subsidized unit, but without the paperwork, bureaucracy, or long-term obligations of a grant application. Maintenance: Regularly serviced by the expert Dimpex technical team. Performance: High-spec "Multi" version for versatile production needs. Serious inquiries only, please.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1349, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 850 mm, edge thickness (max.): 60 mm, total height: 1,725 mm, total length: 7,540 mm, HOLZ-HER Variant 1446 5.10 Year of manufacture: 1997 Edge banding machine, single-sided Working range according to brochure: Edge thickness: 0.3 - 30 mm Workpiece thickness: 6 - 60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Feed rate: 8/16 m/min (depending on configuration) Listing for machine search platform HOLZ-HER Variant 1446 5.10 Edge Banding Machine | Year of manufacture 1997 For sale is a HOLZ-HER Variant 1446 5.10 edge banding machine in used, functional condition. The machine was used in the production of door elements and is ideally suited for the economical edge banding of panel materials and solid wood components. Technical data Manufacturer: HOLZ-HER Type: Variant 1446 5.10 Year of manufacture: 1997 Machine no.: 151 / 9-704 Edge thickness: 0.3 - 30 mm Workpiece thickness: 6 - 60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Feed speed: 8 / 16 m/min Dodpo Adrgfsfx Ak Aocp Compressed air connection required Equipment Edge magazine Glue application station Pressure zone Trimming unit Further equipment according to machine configuration

Condition: used, Year of construction: 2009, 0,4-6 mm Workingpiece thickness from to 6-60 mm Total length 3516 mm Feed speed 10 m/min. Weight 850 kg Dcedozy Sfcjpfx Ak Aop

Condition: used, used, in top condition with new feed rollers cleaned, function-tested, trial run Brand: Holzher Dodpfx Ajy Dh R Eek Ajcp Type: ETZ Machine no.: 24098 Motor with pole switching, 2 speeds 2 / 0.75 kW Roller diameter 110 mm Roller width 50 mm Feed rollers: 3 pieces Speeds: 8 steps, 2-30 m/min. Space requirement approx. 1300 x 500 x 800 mm Storage location: 97447 Gerolzhofen, loaded free of charge, unpacked Transfer in as-is condition, as inspected and function-tested, without overhaul, without warranty or liability

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit Dodpszi Am Nsfx Ak Aecp * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence Dcsdpfxozpzy Ij Ak Aep - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, used, in good condition with new feed rollers Brand: Holzher Type: ET2 Machine no.: 29091 Motor pole-switchable, 2 speeds Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 3 pcs with stand Speeds: 8 pcs, 2 – 30 m/min, 4-way switchable Space requirement approx. 1300 x 500 x 800 mm Total connected load 0.7 kW Dcjdpfxsyztzkj Ak Aop Storage location: 97447 Gerolzhofen, loaded free, unpacked Transfer in as-is condition, as inspected, function-tested, without refurbishment, without guarantee or warranty

Condition: excellent (used), HOLZ-HER TRIATHLON 1486 V – Industrial Edge Banding Machine For sale: a professional, industrial single-sided edge banding machine from the German company HOLZ-HER, model TRIATHLON 1486 V. Identification data: Manufacturer: HOLZ-HER Model: TRIATHLON 1486 V Year of manufacture: 2003 Identification number: 172-0312 Machine number: M 109 Type: industrial single-sided edge banding machine Equipment and machining capabilities: pre-milling unit, gluing station, edge trimming units, cutoff saws, corner rounding unit, profile sanding unit, Dcodpfx Ae Ahlyrjk Asp oscillating unit, polishing brushes, programmable control with operator panel. The machine is designed for industrial edge banding of furniture panels and carpentry elements. Technical condition: The machine is in good working order. It can be inspected before purchase.

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 Dcsdpfewkf Twsx Ak Asp o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Dcodpfx Aew I U Ecsk Ajp Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Dedpfxswwiybj Ak Ajcp

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2018 Features and Technical Specifications: - Exhaust (mm): 2 x 120 1 x 140 - Milling range in the X direction (mm): 3200 - Milling range in the Y direction (mm): 920 - Travel range in the Z direction (mm): 1500 - Material thicknesses from 8 to 70 mm - Vector speed: 68 m/min - 5041765 Campus V7 - Single Evolution - Software for Evolution-type CNC machines Dcedpe Af I Ulsfx Ak Ajp - 5049338 Workpiece Clamping System KPL - 5038470 Drilling Unit 7883, 15 spindles, (9 6) - 5038471 Milling unit 7830, power: 10.3 kW (S6-40), air-cooled - 5048867 Tool changer 7887, 6-position magazine – pneumatic pick-up systems; max. tool diameter: 110 mm - 5048866 Tool changer 7874, 1-position unit, magazine swiveling in X and Y directions, incl. Clamex angular gearbox - 5038498 ECO vacuum system, single-circuit vacuum system, 8 m³/h - 5039592 Handheld control unit for remote control of the machine - 5038956 21.5" flat-panel display for simple and intuitive machine operation - 5008984 Uninterruptible Power Supply (UPS) - The UPS is a temporary power storage device - 5041550 CabinetControl Base software for furniture design and production - 5038499 Manual central lubrication system - 5041572 LASER workpiece length measurement for precise measurement of the workpiece end inside the machine - Dimensions: 3675x1660x2350 cm - Weight: 2500 kg