Used Holzher 1225 for sale (165)

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Kodpfjx Eilqjx Ab Tsdh Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm Kdsdpfx Abowka H Ss Toh - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: excellent (used), Distance between the drills 32 mm 2x 1.5 kW motor Kdedpfjtrdltex Ab Teh Pneumatic pressure Distance between the units 72 cm 2 lower units 1 unit with 26 drills

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Cutting length 5300 mm Cutting height 2200 mm Max. workpiece thickness 80 mm Motor 5.5 kW Compressed air connection 6 bar, 50 NL/min Extraction connection 2 x 100 mm, 1200 m³/h Kdodsxymd Hspfx Ab Tjh Pneumatic unit lock Pneumatic immersion of the unit Digital horizontal display Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) Ksdowka Upepfx Ab Tjdh - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Year of construction: 2001, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) Kjdpfx Absxlqpde Tsdh - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER Kjdpfxogxpilj Ab Tedh

Condition: new, Year of construction: 2025, machine/vehicle number: 561, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,100 mm, cutting length (max.): 3,100 mm, feed rate X-axis: 100 m/min, saw drive: 11 W, warranty duration: 12 months, Equipment: scorer, HOLZ-HER Pressure Beam Saw Tectra 6120 power, year of manufacture 2025, delivery ex works - 1 angular air-cushion table 1800 x 600 mm with 1800 mm stop rail - 2 air-cushion support tables 1800 x 600 mm - 3 feed rollers at the front - 3 double-finger floating workpiece clamps - 4 floating workpiece clamps - Sliding door on the left - Automatic cut length limitation - Pro-Lock quick-change clamping system - Optibase Plus optimization software for office use - Uninterruptible Power Supply (UPS) - Automatic central lubrication Kdsdpfx Asx Nqrvsb Toh - Label printer and software - Hand-held remote control unit - Width stop positioning speed 25 m/min, return speed 100 m/min - Saw carriage feed speed 0–100 m/min, return speed 130 m/min - Scoring motor 2.2 kW - Maximum saw blade projection: 95 mm - Motorized groove height adjustment 0–30 mm - Delivery time: immediately available

Condition: new, Year of construction: 2025, machine/vehicle number: 2128, functionality: fully functional, workpiece height (max.): 65 mm, edge thickness (max.): 15 mm, feed rate X-axis: 18 m/min, warranty duration: 12 months, HOLZ-HER Edge Banding Machine SPRINT 1329 multi, year of manufacture 2025, ex works delivery - Motorized pressure bridge adjustment Kdodpfx Ajx Nqn Rob Teh - iTronic – automatic pressure and glue quantity control - Motorized adjustment of the infeed fence 1350 mm - Automatic chain lubrication - Vertical bottom nesting shoes - Edge-Control PPC 322W control unit with 21.5" color touchscreen - ECO-MODE energy-saving mode - Pre-milling unit FG501 with 2 milling aggregates - Glue application system GlueJet GJ725 for EVA and PUR in cartridge and granule form, swiveling 90 degrees - Storage chute for 1.5 kg EVA granulate - Motorized pressure unit D501 - End trimming unit KA501 - Milling unit FR701 Mot6 multi - Profile milling unit FF701 with 100% repeat accuracy - Scraping unit ZT502 Mot6 multi with motorized 6-axis adjustment - Surface scraper FK701 - Spray unit TR501 for infeed and outfeed - Spray unit GM501 after pressure unit for high-gloss edges - Buffing unit SW501 - Delivery time: immediately available

Condition: new, Year of construction: 2025, machine/vehicle number: 1705, functionality: fully functional, travel distance Y-axis: 985 mm, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, HOLZ-HER Vertical CNC Evolution 7405 PinJet, year of manufacture 2025, ex works delivery Workpiece clamping on the rear enables processing of the entire perimeter without reclamping (for workpieces up to 1500mm length) Workpiece size X = 200 - 3200 mm Workpiece size Y = 70 - 1200 mm (= max. passage size) Maximum milling dimension X = 1500 mm (without reclamping) Maximum drilling dimension horizontal X H = 1168 mm Z-stroke Z = 240 mm ECO-MODE energy saving Workpiece length measurement by laser 2x Campus V8 CAD/CAM software with process simulation for both machine and office Handheld remote control unit 2D barcode scanner Control panel with 21.5" flat screen Uninterruptible power supply (UPS) Milling unit 7830, power 10.3 kW Drilling unit 7885 with 19 spindles Vertical adapter with double presser force Integrated saw unit in X-direction Complete dowel unit with step conveyor 6-position linear pick-up tool changer Vacuum system Power 16 m³/h ECO-VAC intelligent vacuum system Kdodex Nqlpjpfx Ab Tsh Hi-Speed USB Device Network Server Automatic central lubrication Xcut package tool set for doors Safety device Pumper Tool set for XL drilling head

Condition: new, Year of construction: 2025, machine/vehicle number: 228, functionality: fully functional, travel distance X-axis: 4,045 mm, travel distance Y-axis: 2,490 mm, travel distance Z-axis: 317 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 120 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 20 m/min, HOLZ-HER CNC Nesting Machine Dynestic 7507 push, year of manufacture 2025, brand new, delivery ex works Campus V8 CAD/CAM software with process simulation Campus V8 Plus CAD/CAM software with material removal simulation (Better Sim) Campus V8 Better Nest freeform software Handheld remote control unit 2D barcode scanner Control panel with 21.5" touch screen Uninterruptible power supply (UPS) Kdedpfjx Nqdlox Ab Tjh Ultrasonic measurement on controlled gantry Milling unit 7830, power 10.3 kW Drilling unit 7884 with 14 spindles Vertical adapter with double feed force Integrated saw unit in X-direction Additional machining area at the rear with 1 stop 8-position linear pick-up tool changer Vacuum pumps 140+140+500 m³/h ECO-VAC intelligent vacuum system 16-circuit vacuum system, software controlled Hi-Speed USB device network server Automatic central lubrication Nesting milling cutter tool set in tool case Tool kit for drilling head Discharge table with controlled and motorized conveyor belt Additional extraction via discharge conveyor belt TouchLabel PRO - touchscreen and label printer mounted on stand Extraction hood at the end of the discharge conveyor Warranty period: 12 months Delivery time: immediate

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: The machine has been completely overhauled: - New Glue Jet 301 adhesive system (top section 1 mm) - All units checked - All cutters sharpened - All knives replaced Feed speed: 10 - 18 m/min Workpiece length: min. 160 mm Workpiece width: min. 60 mm Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Electrical for stepless feed: 400 V / 50 Hz, 2.2 kW Kedpfxewka Iis Ab Tedh Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving mode Entry fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Edge feeder 1901 fully automatic Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible plates for scraper holder R = 2.5 mm (2 pcs. required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Kdedpfjx H Sutjx Ab Tsh

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Kdedpfx Absw I Ug He Toh Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Holz-her Lumina 1380 Edgebander with return conveyor Max. edge banding thickness: 8 mm Max. panel thickness: 60 mm Max. thickness of rolled material: 3 mm Min. workpiece length: 160 mm Min. workpiece width: 60 mm HOLZ-HER GLU JET adhesive system Spraying unit Calibrating units Pre-heating End trimming/cross-cut stations Milling stations for trimming/radius/chamfering Corner rounding units Edge scraper Brush unit Holz-her Edgecontrol control system Kodpfjx Nnbbex Ab Tedh

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Ksdpfxsw Nac Ao Ab Todh Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Kdodewka Ipspfx Ab Tsh Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Kjdpjrz Irrjfx Ab Todh Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: used, Year of construction: 2005, Used machine Kedpfx Abswka H Ej Tedh Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness Kdsdpexu E Nwofx Ab Tjh with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Year of construction: 2014, • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual Kdsdpfxex Huhco Ab Teh manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: used, Year of construction: 2015, functionality: unexamined, workpiece width (max.): 920 mm, number of slots in tool magazine: 6, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 80 mm, Equipment: rotational speed infinitely variable, Holz-Her EVOLUTION 7405 4mat (Customer machine / Brokerage offer) - Milling spindle 7.5 kW - Campus NC-Hops V6 software - Hand scanner - Vacuum pump 8 m³/h Kdsdpfxox I A Elo Ab Toh - Workpiece length measurement (laser) TECHNICAL SPECIFICATIONS Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 920 mm Material thickness: Z = 8 to 70 mm Max. travel distance in X-direction without reclamping: X = 1500 mm Z stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Machine can be refurbished by us (the manufacturer), as well as dismantled, installed and operators trained. No warranty / guarantee from the manufacturer, as this is a brokerage offer!

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Kjdpfowxr Dxsx Ab Tjdh

Condition: used, Holz Her Auriga 1308 FÜ + PU Kdodpfxsxrr Uze Ab Toh Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple adjustment options, capable of cutting half or full sheets. Can be tested, operates well. Kdjdpfx Aox Eyqyeb Tjh