Used Hydraulic Deep Drawing Press for sale (28,747)

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Fgsdpfjzypmwjx Al Ush Ram area: 150 mm Downstroke speed: 120 mm/s Upstroke speed: 30 - 450 mm/s

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Fgedpez Iyyzjfx Al Uoh Machine weight approx.: 16 t

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Fgodpfxovc Ax Ne Al Uoh Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Year of construction: 1987, Press force: 315 t Stroke: 750 mm Frame width: 1700 mm Side frame opening: 1100 mm Shut height (stroke up): 1250 mm Table area: 1600 x 1300 mm Cushion force in table: 125 t Cushion stroke in table: 350 mm Fgsdpfezynk Isx Al Ueh Cushion area in table: 1000 x 900 mm Table height above floor: 750 mm

Condition: used, Year of construction: 2022, Force: 3000 kN; Stroke: 250 mm; Dimensions: 705 x 500 x 500 mm; Weight: 11.5 tonnes; Hydraulic press, nominal pressure: 260 bar; Maximum pressing force: 300 tonnes. Fsdpfx Aozgv Rcol Uegh

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Fsdpfx Aeudph Isl Uogh

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Fgsdezvnfdepfx Al Uoh Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: new, functionality: fully functional, Year of construction: 2026, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, reverse speed: 14 mm/s, total length: 1,150 mm, total width: 850 mm, total height: 1,800 mm, Special Offer – 5% Discount Available! Hydraulic C-Frame Press – 250 kN (25.5 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for precise pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, allowing convenient machining of larger workpieces and easy material handling from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, delivering reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features • Pressing force of 250 kN (approx. 25.5 tons) • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Excellent access to the working area • Suitable for industrial and workshop applications • CE certified Technical Specifications • Pressing force: 250 kN (approx. 25.5 tons) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Ram stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm • Downward speed: 10 mm/s • Return speed: 14 mm/s • Motor power: 3 kW • Packed dimensions (L × W × H): 1150 × 850 × 1800 mm Applications • Pressing • Bending • Straightening • Assembly operations • Metal forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery Fjdpfx Aleyr Ek Rs Ujgh The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm Fgedpew Smuksfx Al Ush passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1987, Pressing force: 65 t Fgjdpfx Ajzyl Dfel Ueh Stroke: 1100 mm Frame width: 930 mm Side frame opening: 705 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, type of input current: three-phase, pressing force: 10 t, stroke length: 200 mm, operating speed: 260 mm/s, table width: 430 mm, table length: 440 mm, oil tank capacity: 46 l, overall weight: 800 kg, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition. Manufacturer JAM HYP-1000 model Model year 1995 Capacity 98KN (10t) Stroke length 200 mm Open height: 395 mm Table size 440 × 430 mm Punch hole φ32 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 19 mm/s Ram return speed: 219mm/s With light safety device Two-handed operation. Fgodpfx Alevbfkrj Uoh Voltage 3 phase 200v 1.5kw Press body weight: 800kg Operating oil: 43 liters Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1990, pressure 150 t Fgjdpfx Ajy Erv Iol Ueh distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press - hole in table Ø 120 mm

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Shut height (stroke up): 1400 mm Table area: 3000 x 2000 mm Fgjdpfxozyl Ano Al Ush Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Fgsdjz Ari Tjpfx Al Uoh Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm Fgsdpju Nfinjfx Al Ueh ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Model year 1995 Fgodpfx Aewcqc Ujl Uoh Capacity 98KN (10t) Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s With light safety device voltage 3-phase 200v 1,5kw press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Stroke: 2,000 mm Fgjdpsz A Tvxsfx Al Ueh Clamping area: 4,900 x 2,500 mm Max. tool weight: 50,000 kg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking Fedpfx Alogg Nn Ss Uogh

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch Fsdpszzzi Hofx Al Usgh - Center-finding device - Support table with stops and scales

Condition: used, Year of construction: 1990, Press force: 200 t Stroke: 300 mm Frame width: 1400 mm Side frame opening: 770 mm Shut height (stroke up): 500 mm Table area: 1300 x 1100 mm Cushion force in table: 80 t Cushion stroke in table: 150 mm Cushion area in table: 700 x 700 mm Table height above floor: 930 mm Fjdpfx Aljzypkve Uogh

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw Fedpfx Aoz Afhpel Usgh - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion Fgsdpfx Aletqqq Rj Ueh - with light bareer make SICK

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Fodpfx Ajzp Ex Ujl Usgh Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Fedpfx Aljgrkigs Uegh Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), functionality: fully functional, pressing force: 120 t, stroke length: 300 mm, operating speed: 59 mm/s, reverse speed: 180 mm/s, table width: 600 mm, table length: 1,000 mm, distance table to ram: 800 mm, clearance between the columns: 850 mm, overall weight: 6,000 kg, operating pressure: 290 bar, installation height: 500 mm, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Fedpfsylk Easx Al Usgh