Used Krenn Bench Drill for sale (7,311)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Iiedpjxw Rpuefx Ac Eji 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm lip angle 40 - 180 ° total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm Iedpfx Acjvdxz As Ejii Equipment: - Chuck - Coolant device - Machine light - Operating instructions

Condition: used, 1 piece double grinding stand HAHN & KOLB as per photos and inspection, on pallet. Colour: green. Dimensions (L/W/H): approx. 110x70x40 cm. Condition: used. Payment method: advance payment by bank transfer. Storage location: hall. Shipping: Collection only – No shipping offered for this item! Iodoxw Tqnopfx Ac Esii

Condition: used, Used machine Ijdsxwz N Eepfx Ac Ejii Availability: approx. mid/end of January 2026 Location: Hesse

Condition: excellent (used), Workbench, usable from both sides. Length: 2500 mm. Depth: 1250 mm. Worktop height: 930 mm. Height with superstructure: 1560 mm. Material: multiplex, 30 mm thick. Structural timber: 16 x 6 cm. Intermediate shelves: 25 mm MDF. Weight: 250 kg. Iijdpfexvtaasx Ac Esi

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Iiodpsxu H Eyjfx Ac Eji Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Isdpfxeif Az Uj Ac Eeii Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Iijdpfxexr Tx Us Ac Eoi Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle Ijdpfx Acedpcfle Esii - new machine - CE certificate - solid - professional Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: good (used), Nagel Citoborma 280B Paper Drill The device is 100% functional. This is one of the newest models. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Super condition. Solid construction – weight 76kg. 380V power supply Two drilling heads, with adjustable spacing within the range of 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected The set includes drills and tools, a new cutting stick, and an instruction manual. Iiodpfx Aoxwtu Hoc Eei

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm Iisdpfogd Ipkex Ac Esi weight approx. 900 kg good condition

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Iodpoxu Hp Eefx Ac Eeii Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Iiedpfxsw Tc Hfo Ac Eoi Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2017, Serial number: tmg17sed0500/8992 xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours 168kW 17200kg Leica GPS 2560 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery     Description: We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Iodpfx Ajxr Txzec Eoii Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps

Condition: reconditioned (used), Year of construction: 1980, Rapid radial drilling machine DONAU DR 23 Year of manufacture: 1980 Speed range: 70 rpm – 1550 rpm Arm reach: 920 mm Drilling capacity in steel: 30 mm Thread cutting device Iijdpfx Aexuh Rkjc Esi Mechanical feed Clamping table surface: 1050 mm x 400 mm Spindle taper: Morse taper 3 Machine lamp Coolant device Rotary table Ø 250 mm with index plates Machine vice 160 mm 5 height-adjustable machine shoes Various tools

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Iiedpfx Acol Tn Epj Eei

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Ijdpfxjn N Ekco Ac Esii Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Iisdexu Hnujpfx Ac Eei Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2021, Maggi Boring System 29 Multi-Spindle Drilling Machine Number of spindles: 29 Speed: 2800 rpm Distance between first and last drill: 896 mm Noise level: 76.1 dB Number of pneumatic clamps: 2 Center distance between spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Iiodoxvctvspfx Ac Eei Weight: 370 kg Working pressure: 6–7 bar Motor power: 1.5 kW Max workpiece thickness: 70 mm Spiral System – device for rapid drilling depth adjustment CE certified Year of manufacture: 2021

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco Flexiroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. Iijdoxr Txnepfx Ac Eoi The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Model: Flexiroc T40-11 borerigg m/2540 hammer,CME sliper og gps

Condition: good (used), Grinding wheel diameter: max. 300 mm Rotational speed: 1,500 rpm Drive power: 1.5 kW Machine dimensions (L x W x H): 750 x 420 x 1100 mm Weight: approx. 130 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Iiodpsw Emahsfx Ac Eei DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2024, functionality: fully functional, - Single-head drilling machine for drilling from 0 – 90 ° - Pneumatically adjustable head angle - Cast iron spindles - High-speed spindles - Pneumatic material clamps - Cast iron worktable - Quick and precise setup - Accurate drilling STANDARD MACHINE EQUIPMENT: - 2 aluminium rulers, each 1.5 m long (right and left) with two stops - 5 quick-release drill chucks Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic presses: 2 Distance between spindle centers: 32 mm Iisdoxwcbcspfx Ac Eji Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 – 7 bar Rotation speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm Pickup: Almelo, Netherlands Mobile: +31634707163

Condition: used, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm Isdegmi U Dspfx Ac Eeii drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps - left and right rotation - E-magnet KOCH, type KL32/6 - drill head height adjustment guided in linear guide - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

Condition: excellent (used), SCM T130 Shaper (Spindle Moulder) Long tables with extension 4-roller power feed Spindle diameter 30 mm Iiodpfx Ajxw U N Esc Eoi Motor 5.5 kW 5 spindle speeds Foot brake Forward/reverse rotation Machine condition: very good.

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Grinding wheel bore: Ø 32 mm Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz Iedpfexf Uv Uex Ac Eoii – Fitted with one 36 and one 80 grit corundum grinding wheel Required space (L x W x H): 460 x 240 x 220 mm Weight: 18 kg Good condition