Used Manual Edm Machine for sale (72,647)

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Gbjdpfxsymm D Io Ahnon Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. Gbedpfxegculvj Ahnon It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor Gedpfx Ahexrpm Uensbn - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile • The bending tools are suitable for narrow and wide sheet metal for fine bending Godpfewg Ru Ejx Ahnebn • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops Gbsdpfeyhq Aqox Ahnon - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition

Condition: excellent (used), see pictures; Gbsdpfxjha U U Rj Ahnjn further extensive clamping devices available! Please contact us if you are interested !

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop Gsdpfxjtylgus Ahnjbn - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

Condition: good (used), Year of construction: 1976, machine/vehicle number: 01-6262, Offer 25246 Technical specifications: - Max. working width: 2040 mm - Max. material thickness: 2 mm - Bending angle: approx. 0 - 135° - Bending angle lockable with end stop - Upper beam operated via lateral hand crank - Max. upper beam stroke: 85 mm - Max. adjustment of bending beam: 80 mm - Bending process assisted by eccentric weight - Space requirement: approx. W 3250 x H 1250 x D 450 mm Gedpfx Asw Uhamjhnjbn - Weight: approx. 1700 kg

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail Gsdpfx Ahoh S Uironebn -tool rest -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Gedpfx Ajfifbbjhnebn Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Gbedpfxofifa Aj Ahnon Freight costs on request

Condition: good (used), Year of construction: 2009, functionality: fully functional, Table size: 600 x 400 mm Maximum workpiece size: 900 x 600 x 330 mm Maximum workpiece weight: 750 kg X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Generator output: 60 A Machine dimensions: 2190 x 1880 x 2360 mm Machine weight: 2800 kg Accessories: Gsdpfxoyity Uj Ahnsbn - Magnetic table and EROWA clamping system - Machine manual and operating instructions The machine is in very good condition and comes from a small family business that recently closed down.

Condition: excellent (used), Year of construction: 2008, X,Y travel: 14.6" x 10.6" U,V,Z travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Gbjdpjwqq Rhofx Ahnsn Drive system: AC servo motor/linear motor Wire diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb Taper angle: ±21°/4.33 in (DA+DB=0.6 in) Layout (W x D x H): 90.6" x 89.2" x 80.6"

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Gbsdpjxx Uatjfx Ahnjn Weight: 3,000 kg

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm incl. chiller Gbjdpfsx Hghujx Ahnon Automatic wire threading Water bath

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Gbedpfx Aew Swd Aohnsn

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Condition Used Maximum weight of the part 1000 kg X 600 mm Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Wire diameter 0.10 to 0.30 mm Gjdpfx Ahsx Avh Honsbn CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) Gbjdjvvl Uaopfx Ahnjn The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Gbedpfjul Uwljx Ahnen Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER high-precision measuring and scribing plate, cast steel/grey cast iron, heavily ribbed Machine no. 22890285 Year of manufacture 1985 Length 2500 mm Width 1500 mm Gbjdpfx Ahekdnwbsnsn Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - with manually movable measuring arm, measuring range X = 1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - 5 height-adjustable feet Required space L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface finish

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! TECHNICAL SPECIFICATIONS Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Gjdexqn Ibspfx Ahnebn Table dimensions: 720 x 460 mm MACHINE DETAILS Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg EQUIPMENT Workshop drawer cabinet Documentation

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Working area 4000*2000*1250 mm Table size 3200*1600 mm Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Max table load 25,000 kg Machine dimensions 6640 x 5800 x 4120 mm Gedpfx Ahexr Uzwensbn Machine weight 37,000 kg

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, AGIE FUTURA V 1PM MONDO 20 STAR Gbedpeymnrmofx Ahnsn Year: 2000 Operating hours: approx. 10,000 h Documentation: Complete

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h Gsdoxni T Hopfx Ahnobn

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Gbjdpjw Ucyujfx Ahnsn Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.