Used Manual Edm Machine for sale (73,012)

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Djdpji Ezq Dofx Ak Ajcp Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Dodjzy Upkspfx Ak Aocp Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm Dodpjpgmq Usfx Ak Ascp bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: excellent (used), See images; a wide range of other clamping devices is available! Dodoha U U Rspfx Ak Aecp Please contact us if you are interested.

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Dodpjgfm Rrsfx Ak Ascp Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient setup Incl. AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. Subsequently, we will commission the machine at your facility. You will receive a 6-month warranty on the machine. We would be pleased to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture: 2005 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be completely overhauled and thoroughly tested by us. Djdpfx Akogzv Scj Ascp You will receive a 6-month warranty on the machine. We would also be happy to offer you commissioning and training.

Condition: new, Year of construction: 2026, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Djdpfx Aksgculvj Aocp Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Dsdpfxocnxc Ne Ak Ajcp Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Djdpfsfifbbox Ak Aocp Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 250 rpm, spindle speed (max.): 2,500 rpm, total height: 1,600 mm, total width: 1,200 mm, total length: 1,450 mm, lifting speed: 130 mm/s, hone diameter: 50 mm, overall weight: 830 kg, stroke length: 160 mm, power: 0.75 kW (1.02 HP), This easy-to-use manual honing machine is characterized by high stability and precision, and can be adjusted via stepless electronic speed control. The honing diameter ranges from 3mm to 50mm, with lengths up to 160mm. Easy to operate and simple to adjust. Due to its compact footprint, it is highly flexible in terms of placement. Dsdpfx Aow Upzxjk Ascp

Condition: new, Year of construction: 2025, 134 NEW Rondo Dough Roller - Tabletop Dough Roller TECHNICAL DATA: - Foldable stainless steel arms, - Roller opening 0.3 – 30 mm, - Motorized conveyor belts, - Roller diameter 84 mm, - Easy-to-read scale with dough thickness switch, - Roller length 500 mm, - Scrapers can be removed without any tools, - Outfeed belt speed 50 cm/sec, Dsdpfxexbdy Ie Ak Aocp - Separate start and stop buttons. Dimensions (in operation): 1560 x 965 x 500 mm, - Safety guards. Dimensions (in standby): 810 x 965 x 710 mm, - Finger guards. Power: 0.75 kVA, - Easy-to-clean cotton belts, - Flour container, - Power supply: 3 x 200 – 460 V. 50/60 Hz, - Weight: 80 kg, EXTERNAL DIMENSIONS (in cm) - Length: 156, - Width: 96.5, - Height: 50. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Dcsdpfx Akofibfgs Aop Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, travel distance W-axis: 500 mm, number of slots in tool magazine: 54, TECHNICAL DETAILS Type: CNC EDM Drilling Machine Travel in X-axis: 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 755 mm Travel in W-axis: 500 mm W-axis type: Servomotor Electrode length: 800 mm Drilling diameter: from 0.10 mm MACHINE DETAILS Width: 1,975 mm Depth: 1,445 mm Height: 2,280 mm Height: max. 2,785 mm EQUIPMENT Electric changer with 18 stations Electric changer with 36 stations Automatic electrode and guide changer Breakthrough detection CAD import with intuitive touch operation Detection of the holes by color code Automatic wear compensation Blind hole machining with depth control Dcsdpfx Akozhnigo Ajp 3-stage discharge control Thread erosion for hardened materials M3 - M16 Generator Power Booster for large diameters Indexing axes, 1 and 2 axes available Large water tank with 175 liters and filter system Drilling depth measurement Automatic electrode check

Condition: new, functionality: fully functional, Manual equipment to cut the corners of the box blanks and make V & U-shape grooves. Ideal for mock-up samples and short runs. Corner sizes: max. 150 x 150 mm Cardboard sizes: max. 700 x 700 mm (box) max. 1000 x 700mm (cardboard cover) Cardboard thickness: min. 1 mm – max. 4 mm Tools: Nr.1 for “V” shape groove from 80° to 100° Djdpfxew Ad N Uo Ak Ajcp Nr.1 for “V” shape groove from 100° to 130° Nr.1 for “U” shape groove from 6 mm to 8 mm (optional) Wheelbase: no limit

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool Dcjdpfx Akjgi Rnws Aop - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: Dcsdpozz Hg Rofx Ak Aop – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: used, Year of construction: 2003, operating hours: 25,407 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 25407 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003 Dodozkhgdepfx Ak Aecp

Condition: used, Year of construction: 2003, operating hours: 34,621 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 34621 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003 Dcodpfx Aszkhltsk Aep

Condition: excellent (used), Robot Coupe R23 VCM 2 speed machine 3 blade set up Dcsdpe Agvm Uefx Ak Aop Tipping discharge Process timer In good running order

Condition: new, Year of construction: 2026, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, total height: 2,280 mm, total length: 1,445 mm, total width: 19,975 mm, overall weight: 2,600 kg, Technical Data: Travel Paths: X: 600mm Y: 500mm Z: 755mm W: 500mm W-Type: Servo Motor Dimensions (W x D x H): 1975 x 1445 x 2280 mm (max. 2785 mm) Required Space (W x D x H): 2100 x 1600 x 2900 mm Usable Electrode Diameter: ø 0.1 ~ ø 3.0mm (up to ø 6.0mm optional) Usable Electrode Length: 800 mm Machine Weight: 2600 kg Max. Workpiece Weight: 1000 kg Power Supply: 3ø 380V 50~60Hz (adjustable) Max. Permissible Current: 30A Rated Load Capacity: 5 KVA Required Pneumatic Pressure: Dcjdjy R Npvepfx Ak Asp 5 bar Ion Exchange System with Sensor

Condition: new, 10 pcs. cutting inserts/blades from Allied Machine & Engineering Wohlhaupter 211021-34 3 Series T-A Dodpfx Aez Hbx Nsk Ascp Diameter 45 mm C1 Carbide AM200 for drilling

Year of construction: 2026, condition: new, Semi-manual operating Suitable for adhesive labels Label width: 20-165 mm Label length: 20-200 mm Cylindrical bottle shape only 600 bottle or jars/hourú Dimensions: 530x420x300 mm Djdpfx Akjfir Uco Ascp

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF-003, total width: 1,050 mm, total length: 800 mm, total height: 1,500 mm, empty load weight: 80 kg, space requirement width: 1,100 mm, space requirement length: 1,000 mm, space requirement height: 16,000 mm, Equipment: CE marking, Semi-automatic bag-in-box filling machine is specially designed for bag-in-box filling,Adopt plunger pump to measure filling with high filling precision. And easy to adjust filling volumes. It is widely used for filling wine, juice, milk, water, and other beverage. Dodpfsxv Rqiox Ak Ascp 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. • The machine can cut at +45, -45, and intermediate angles. • Quick setting stops for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic for practical use. • Diamond saw blade diameter is Ø400 mm. • Standard with measuring and material handling conveyors (2.5 meters on both left and right sides). • Cooling unit for cutting aluminum profiles. • Capability to work with a digital meter. OPTIONAL: • Roller conveyor system (3 meters on both left and right sides). Dcedpsramzuofx Ak Aop

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Dcsdpoz D Uguefx Ak Aop Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer