Used Plastic Molding for sale (6,879)

Condition: used, Year of construction: 2006, A production line with 3 KUKA KR 150-2 industrial robots for the production and handling of molded parts is offered. Rated payload per robot: 150kg, max. reach: 2700mm, 6 axes, pose repeatability: +/-0.06mm, protection rating: IP65, mounting position: floor/ceiling, axis speeds: A1: 110°/s, A2: 110°/s, A3: 100°/s, A4: 170°/s, A5: 170°/s, A6: 238°/s, motion ranges: A1: +/-185°, A2: 0° to -146°, A3: +155° to -119°, A4: +/-350°, A5: +/-125°, A6: +/-350°. Including peripheral equipment and accessories. Weight per robot without controller: approx. 1245kg. The production line was used, among other applications, for the production of plant containers and is ideally suited for processes involving plastics as well as processed fiber-based bio-residues and residual materials. It is particularly designed for molding, pressing, handling and automation processes. Inspection by arrangement. Ledpfszu Ndxsx Akqehn

Condition: as good as new (ex-display), Year of construction: 2025, KraussMaffei KM 651-6100 GX hydraulic injection molding machine LRX 250 robot Year of manufacture: 2025 TECHNICAL DATA Manufacturer: KraussMaffei Year of manufacture: 2025 Clamping force: 6500 kN (650 tons) Machine type: hydraulic injection molding machine Robot: KraussMaffei LRX 250 CLAMPING UNIT Lodpfx Aks Aaxp Soqohn Clamping force: 6500 kN (650 t) Mold opening force: 455 kN Platen dimensions: 1660 × 1530 mm Tie bar spacing: 1200 × 1020 mm Mold opening stroke: 1450 mm Minimum mold height: 450 mm Maximum mold height: 1000 mm Maximum platen clearance: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140/70 kN INJECTION UNIT Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Injection shot weight: 2391 g (HDPE) Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed: 147 rpm Plasticization rate: 102 g/s Nozzle closing force: 166 kN ELECTRICAL AND HYDRAULIC SYSTEM Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap 6: 3.3 s / 840 mm Dry cycle time according to KraussMaffei: 2.9 s / 600 mm Oil tank capacity: 1435 l DIMENSIONS AND WEIGHT Machine length: 10,190 mm Machine width: 3030 mm Machine height: 2510 mm Net weight: 38,500 kg KRAUSSMAFFEI LRX 250 ROBOT Manufacturer: KraussMaffei Model: LRX 250 Type: linear robot, 3-axis Payload: below 25 kg (including gripper and part) X-axis – stroke from mold: 900 mm Y-axis – vertical stroke: 1000/1000 mm, telescopic Z-axis – transverse stroke: 2500 mm Axis drives: servo motors Vertical axis: equipped with a motor brake Part removal side: opposite to the operating side

Condition: used, Colortronic Dry-Flex Granulate Dryer, Plastic Dryer, M400 Lhedpfx Aoxlqztekqsn For sale is a used granulate dryer, type Dry-Flex M400, from the manufacturer Colortronic. Technical details (according to the nameplate): - Manufacturer: Colortronic, Friedrichsdorf (Germany) - Model: Dry-Flex M400 - Year of manufacture: 11/2012 - Control panel: 6AV6642-0BA01-1AX1 - Operating voltage: 400 V / 50 Hz - Heating power: 33 kW - Drive power: 5.5 kW - Operating pressure: max. 6 bar - Design: Granulate dryer / Plastic dryer - Application area: Plastic processing, injection molding, extrusion - Condition: Used, functional Buy Colortronic Dry-Flex M400 granulate dryer and other items at a favorable price – Here you buy products from a professional for professionals – You will find more attractive offers in our SHOP. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Lsdpfoh Dp R Ejx Akqjhn Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Lsdpfxezz Rkae Akqehn Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Quick-change version of the plasticizing unit with Harting interface Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 6 freely programmable input/output signals Centering rings on both platens

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 92 mm, clearance between the columns: 830 mm, displacement volume: 2,458 cm³, injection pressure: 1,360 bar, injection weight: 2,262 g, mold height (min.): 260 mm, ejector force: 110 N, ejector stroke: 220 mm, plate width: 1,165 mm, plate height: 1,145 mm, total length: 8,750 mm, total width: 2,200 mm, total height: 2,200 mm, overall weight: 20,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 248 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN420A5-3330 D=92 Clamping force: 420T Tie bar spacing: 830x810 Mold height: 180 to 550 Robot interfaces: Euromap 67, Euromap 18 Suitable robot available upon request. Lhedezz Srrepfx Akqen Basic standard equipment: CS standard KEBA 1175 control system UK version Standard screw and cylinder unit Environmentally friendly insulating cover

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, injection weight: 359 g, mold height (min.): 250 mm, plate length: 695 mm, plate width: 695 mm, total length: 5,205 mm, total width: 1,670 mm, total height: 2,200 mm, overall weight: 6,500 kg, Clamping force: 150 t Year of manufacture: 2012 Injection shot weight: 359 g Injection unit 800 Screw diameter: 50 mm Specific injection pressure: 2000 bar Injection volume: 392 cm³ Injection shot weight: 359 g Screw L/D ratio: 24 Tool closing unit 1500 Clamping force: 150 t Tool plate dimensions: 695 x 695 mm Distance between columns: 520 x 520 mm Tool height: 250...650 mm Opening stroke: 400 mm Maximum plate distance: 650...1050 mm Weight: 6500 kg Dimensions (m) L x W x H: 5.25 x 1.67 x 2.20 m Control system: Selogica Equipment: Hydraulic core 12-zone hot runner system Accumulator Frequency converter Ledjz Iz Exopfx Akqohn Hidrive drive 4 x pneumatic valve

Condition: used, Year of construction: 2005, operating hours: 82,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, mold height (min.): 350 mm, total length: 5,320 mm, total width: 1,900 mm, total height: 2,240 mm, overall weight: 10,530 kg, Technical Specifications : Type : 200- 1000 C2 Year of construction : 2005 Clamping force : 2000 kN Size of mould platens (h x v) : 915 x 915 mm Lhsdpez I Tf Rofx Akqon Distance between tie bars (h x v) : 560 x 560 mm Mould opening stroke : 700 mm Mould height min.: 350 mm Max. daylight : 1050 mm Hydraulic ejector - stroke : 200 mm Screw diameter : 55 mm Injection pressure : 1904 bar Stroke volume : 523 cm³ Dimensions: 5.32 x 1.90 x 2.24 m Total machine weight : 10.530 kg Max. mould weight : 2535 kg A second identical machine is also available. A special package price is offered to buyers interested in both units. Please contact us for details.

Condition: used, Year of construction: 2008, machine/vehicle number: SO145, Used PLASTIBLOW PB1H-D blow molding machine for HDPE - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold)Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz electrical supply. Its double-carriage arrangement supports alternating mold movements during the blow molding cycle, helping organize bottle production around the molding process. The single-head layout is intended for a two-bottle 1.0L production configuration.For a used bottling line or dedicated plastic packaging installation, the machine should be integrated with suitable electrical protection, process controls and operator-access safeguards appropriate to the final production environment.Production Line Integration CapabilitiesThis Plastiblow blow molding machine can serve as the bottle-production stage of a PET or plastic container packaging system, depending on the material and tooling installed. It can be positioned upstream of downstream bottling equipment such as rinsing, filling, capping, labeling and secondary packaging machinery.The double-carriage configuration is suited to installations requiring a compact bottle manufacturing process before beverage production or other industrial packaging operations. Mold selection, neck finish, bottle geometry and resin compatibility should be matched to the required container specification and the downstream filling line.Machine Condition & Maintenance HistoryThis 2008 Plastiblow PB1H/D blow molding machine is presented as ready for operation. The available identification data confirms the machine model, electrical supply and CE marking. Before commissioning, routine inspection of the extrusion system, molds, cooling circuits, pneumatic equipment, safety devices and electrical components is recommended as part of normal installation and startup procedures for second hand machinery.Operational Performance & VersatilityThe PB1H/D is configured to make two 1.0L bottles at the same time using a single extrusion head and double carriage. This arrangement supports repeatable production of matched bottle formats where a two-cavity mold configuration is required.Blow molding equipment of this type forms hollow plastic containers for use across industrial packaging applications. Final production capability depends on the installed mold set, extrusion tooling, resin, process settings... Ledpjz E Dfpefx Akqshn

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, OLEOPRESS OP/Z 40 hydraulic press. INJECTION MOLDING PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Lhedpfx Akszpbc Asqsn Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approximately 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approximately 2,800 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Lodpfey Hki Ajx Akqjhn Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Lhodpfszxg Amjx Akqon Year of manufacture: 2005. Includes documentation. The machine is powered on for inspection.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force Lsdpfxszrikme Akqehn • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Lhodpszrwy Ajfx Akqen Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Lhodpfszump Ejx Akqsn Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Lhsdjztzzgspfx Akqon Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Lodpozt Ih Tsfx Akqjhn Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 500 kN, total length: 3,395 mm, total width: 1,000 mm, total height: 2,000 mm, overall weight: 2,510 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Ledpfx Aezx Ukfekqjhn *The video shown in this listing is of a previously refurbished BOY 50M which is very similar to the BOY 50M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Lhodpezvdbuefx Akqsn Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Lhjdpfozw A Ehex Akqon Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg Additional information The machine is equipped with a new screw, which is covered by a warranty.

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site Lodpfezwhdisx Akqshn - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Lhodpfxezx Agnj Akqsn Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!!

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Lodpfxjzx D Efs Akqjhn

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Lhodpjzx Eftjfx Akqon Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Lodezxrc Sjpfx Akqjhn Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016