Used Recycling Electrocables for sale (2,348)

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Csdpfoxy N Dpjx Ah Ieha

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: Codexy E H Hopfx Ah Isha - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Csdpfx Ajxy Idhoh Ieha Available immediately

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 900 mm, conveyor belt speed: 4,000 mm/s, total width: 1,560 mm, total height: 2,500 mm, overall weight: 700 kg, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, emergency stop, Inside width: 430 mm Cedpefhxagofx Ah Isha Inside depth: 550 mm Length: 7300 mm Driving power: 15 kW Driving Speed: 38 1/min Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: refurbished (used), Force pressing cylinder: 2 x 1100 kN Capactiy cars: 30 -40 p/h Bale dimensions: 3,9 x 1,9 x 0,4 m x m Loading height: 1,32 m Csdpfshgibhsx Ah Isha Cycle time: 60 s Power: 22 kW Weight: 22 t Dimensions: 7,5 x 2,8 x 3,0 Manual operation Mobile unit

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Csdpfx Aoxy Hbxeh Ioha Place: Austria Available immediately

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 RMVI-3030-1-014 Chjdpfoxy Imiox Ah Iea RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 MR-2002-4-27

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Chjdpoxy Nkpofx Ah Ija Available immediately

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Chsdpsxy E Evofx Ah Ija Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Chedexy E Siopfx Ah Ija Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Chjdpfx Ahoxy Iikj Isa Available immediately

Condition: like new (used), functionality: fully functional, Z1015201800 Chsdpexy I D Usfx Ah Ioa Z1010880270 etc.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 90088200, total width: 5,000 mm, total height: 2,000 mm, total length: 6,000 mm, briquette diameter: 120 mm, overall weight: 22,000 kg, input voltage: 400 V, pressing force: 300 t, screw conveyor length: 10,000 mm, year of last overhaul: 2024, Equipment: emergency stop, ArnoBrik Briquetting Machine for Metal Materials Technical Data Main Dimensions Length x Width x Height: 6,000 mm / 19.6 ft x 5,000 mm / 16.4 ft x 2,000 mm / 6.56 ft Weight: 22 tonnes / 21.6 tons Functional Data Main Cylinder Force: 4,000 kN / 403 tons Cycle Time: 10 sec Throughput per hour: - Aluminium: 1.5 – 1.9 t/h (1.6/1.5 – 1.9/1.86 tons/h) - Steel / Grey Cast Iron: 2.7 – 2.9 t/h - Steel Powder: 1.67 – 2.0 t/h (1.7/1.67 – 2.0/1.96 tons/h) - Tyre Wire: 2.3 – 2.8 t/h (2.62 – 2.75 tons/h) Briquette Diameter: 120 – 130 mm (4.7 – 5.1 inch) Csdpjygu Nxofx Ah Ieha Briquette Height: 110 – 120 mm (4.3 – 4.7 inch) Briquette Weight (depending on material): 3.0 – 12.0 kg (6.61 – 26.45 lbs) Hydraulic Equipment Number of Pumps: 3 Power Requirement per Pump: 37 kW / 49 HP Working Pressure: 300 bar / 4,351 psi Hydraulic Oil Tank: 2,200 l / 581 US gallons Electrical Equipment Total Power Requirement: 127 kW / 170 HP Drive Power: 3 x 37 kW / 49 HP Control Voltage: 24 V DC Operating Voltage: 400 V, 50 Hz

Condition: used, Year of construction: 2020, mileage: 21,660 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 6,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 3,500 kg, empty load weight: 2,500 kg, next inspection (TÜV): 11/2026, wheelbase: 1,980 mm, brakes: other, driver cabin: day cab, gearing type: other, emission class: euro6, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, soot filter, trailer coupling, * German vehicle * First owner * Original 21,660 km * Only 3,920 operating hours * Condition, see photos * Hydrostatic EasyDrive transmission * EC type approval including 60 km/h approval * All-wheel steering, switchable * 3 brush system - 2 sweeping brushes left and right, Ø 680 mm - Impact-resistant brush suspension * Third front brush, Ø 900 mm, for sweeping corners and ramps, can be used on the left and right * Sweeping width 2,710 mm * 800 mm wide suction nozzle with automatic coarse dirt flap * Extension device for brushes & suction nozzle * Water recycling system Codpfx Aezq Dnwsh Isha * Fresh water tank 200 liters * Stainless steel sweeping material container 2,200 liters * Tipping height 1,600 mm * Trailer coupling, ball head with 7-pin socket * Trailer coupling / trailer load 3,000 kg * Hydropneumatic suspension with independent front wheel suspension * Air conditioning * ROPS-certified comfort cab with 1.7 m³ and 2 seats * Driver's seat König "MV/210 GL" with air suspension and lumbar support * Joystick control * Rear view camera mounted on the rear of the vehicle. Display in the multi-function display including night vision function via infrared LED * Suction nozzle camera for preventive monitoring of the suction nozzle during operation. Including night vision function via infrared LED * Water-cooled VW 4-cylinder diesel engine with direct injection * Work lights, LED * Radio USB * Heated side mirrors * Wheelbase 1,980 mm * GVWR 6,000 kg * Unladen weight 2,500 kg * Payload 3,500 kg * If sold to commercial customers and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to changes, prior sale and errors.

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis Cedpfxjzq Hb Hj Ah Isha 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: used, mileage: 17,670 km, power: 375 kW (509.86 HP), first registration: 03/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Sun visor, air-suspended driver's seat, LED beacon lights on the cab, MAN radio with navigation system, lane departure warning system, air horns, turn assist system, reversing camera, fuel tank on the left, Retarder 35 Multilift Ultima 18s hooklift: containers 5–6.5 m, hook height 1570 mm pneumatic, hydraulic internal locking, rear tipping frame locking with half-moon, radio remote control, additional container supports at the front with internal guide, friction control, turbo function for fast unloading of empty containers. Crane: Asymmetrical multi-shell grab with 5 shells, outreach 9.26 m at 1620 kg lifting capacity, slewing angle 412°. Codpfszhqpvsx Ah Ioha

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. Cjdpfxev Awrwo Ah Ieha + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Chodpoznmpxofx Ah Iea Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER Chodoxmthropfx Ah Iea MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Year of construction: 1981, condition: used, Empty weight: 8.300 kg Aulmann & Beckschulte rubble crusher Type: UF 400x1000 Year of construction: 1981 dimensions: 4700mm x 1600mm x 2800mm (LxWxH) feed opening: 600mm x 430mm Motor: 50HZ 420V Chjdpfxjzry T Ee Ah Isa 55KW 95A Will be dismantled by us. - Year: 1981 - Documentation available: No - CE certificate present: No - Transport weight [kg]: 8300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Shredder Dreher S20/20 Chjdpfjwh I Uxsx Ah Iea No.:K2740 Funnel opening: 310mm x 340mm Motor: 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, - Year: 2016 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Chedjzry S Uopfx Ah Ija Yorick Diebels

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Csdpfezry N Tex Ah Ieha Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1986, total length: 1,900 mm, total height: 2,420 mm, total width: 1,700 mm, Colour: Grey Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 70.144 - Main motor power [kW]: 45 - Rotation speed [rpm]: 1470 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 - Opening width [mm]: 440 - Opening length [mm]: 6500 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 10 - Transport dimensions: 1900mm x 1700mm x 2420mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Chedpfoy Dthvjx Ah Ija

Condition: ready for operation (used), * Brand: Hazemag * on stock: 3 pieces * A-A length: 12.000 mm, Beltwidth: 650 mm, Driving: 5,5 kW e-motor. Codpfxoywm Uvs Ah Ioha