Used Scrap for sale (1,262)

Condition: new, Year of construction: 2024, Consisting of a bale shredder for large bales, type MHB and a straw shredder, type MHZ 1) Bale shredder MHB: Special price starting at €29,975 net (production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (VFD) - this controls the speed of the scraper floor. The bales are placed on the scraper floor and the cutter's feed is activated. The cutter's tines tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale shredder and straw shredder is recommended. Technical specifications for bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill and the power of the straw mill. Without the straw mill, the bale shredder can shred straw up to a maximum of 900 kg per hour) Maximum square bale size: 2400x1200x800 mm (LxWxH) Rotary cutter motor: 5.5 kW, 380 volts Scraper floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (LxWxH) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; Available immediately Special price from €7,995 net Special hopper: + €970 (only in conjunction with bale shredder) Surcharge for the even larger straw shredder (18.5 kW) + €3,940 net Technical specifications, MHZ with special hopper: Motor: 15 kW 380 volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with replaceable inserts Optional (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, Ue protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing width: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options For an additional charge: Intake auger + €970 net Cyclone (mounted by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter €1,750 net --- Further options: Industrial extraction system (demonstration) + from €9,950 net Optional with rotary valve *depresses the material + €5,750 net Control system: from €1,620 net Special shredder extension 3 m *other dimensions must be calculated + €9,750 net Gbsdsb Nulhopfx Ah Eew Briquetting press MPP 180 S; Little-used demonstrator 70 mm briquettes - up to a maximum of 100 kg/h from €39,700 net * larger machines available upon request --- Description: The muetek bale shredder was developed for shredding round and square bales of hay and straw. The shredder flanged to the bale shredder shreds straw from all types of grain, hay, corn, and miscanthus. The muetek machines of the MHZ/MHB series are characterized by their robust design and solid construction. muetek bale shredders of the MHB series are equipped with a chain conveyor onto which the straw bale is placed using the front loader. The support is adjustable depending on the bale type. The chain conveyor presses the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The straw separated from the bale is ejected. --- The machines generally work for dry raw materials: - Straw - Hay --- Hemp shredding only works with a special shredder. Surcharge: approx. €9,720 net * depending on the model. Hemp shredding does not work with the straw mill. Requirements for the raw material: Maximum moisture content 12%

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Main Drive Spindle speed range 10000 Spindle motor power 17 kW Number of axis 3 Additional Equipment Scraper belt conveyor for dry machining Cold light in the work area Central cooling unit for motor spindle and control cabinet, CFC-free This 3-axis HELLER MC 2000 was manufactured in 2011 and features a robust three-phase motor spindle, delivering 17 kW at 10,000 rpm with a SK 40 tool holder. It includes a 2-axis servo tool changer, a stationary tool magazine with 54 positions, and a pallet changing device with 2 pallet positions. If you are looking to get high-quality milling capabilities, consider the HELLER MC 2000 machine we have for sale. Contact us for more information about this machine. Application Types Godpfxsxuay Ds Ah Eebw Milling

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No Gbodpfxswnicko Ah Ejw - CE marking present: Yes - Serial number: AH/115214 - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function Gbsdpfxjw I Rq Ie Ah Ejw + MultiTool function + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Condition: reconditioned (used), functionality: fully functional, conveyor belt width: 650 mm, warranty duration: 3 months, total width: 2,210 mm, total length: 1,235 mm, total height: 1,380 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 12/2027, year of last overhaul: 2025, opening width: 45 mm, Fritsch Rollfix easy Model: 50WK650 Rollfix Dough sheeter with left-hand extension table Suitable for all dough types, for sheeting and laminating Gbsdpfer Eni Usx Ah Eew Stainless steel construction Electric flour duster with programmable control Robust technology Long-roller table below with pressure plate with take-off belt for long roller operation Infinitely variable roller adjustment New belts and scrapers Machine is mobile Connection: 400V, 16A CEE plug Refurbished used machine with warranty and service Option: Maintenance contract Delivery service Many more TOP sheeters in stock!

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Godpfx Asxgrnqeh Eebw With feed device (pendulum arm) Drive power: 90–200 kW

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) Gbsdpfx Asdwktkoh Eew - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Gbodpfx Asxpurksh Eew Specifications: Power: 11 kW

Condition: used, Year of construction: 2010, operating hours: 3,084 h, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2025-11-26 - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 3084 - Number of units [pcs]: 9 - └ 1st unit type: Milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Pre-milling unit - └ 5th unit type: Milling unit - └ 6th unit type: Radius scraping unit Gsdpfx Asxr Uf Njh Esbw - └ 7th unit type: Grooving unit - └ 8th unit type: Preheating unit - - Tools available: No - └ 9th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 14 - Options: Return transport - Details: - └ Description: Includes rolling tables, does not include fencing. - Voltage [V]: 230 - Current consumption [A]: 23 - Fuse [A]: 25 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Gedpfxsxt Ilfj Ah Eobw Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2025, input voltage: 400 V, DGUV certified until: 12/2026, total length: 615 mm, overall weight: 258 kg, total width: 640 mm, total height: 1,380 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 258 kg, Mixing and Whipping Machine Rego SM 2 - Refurbished The ultimate machine for whipping tasks! Floor-standing model 2 operating modes: 1 x Mixing / 1 x Whipping Gjdpovvqw Hofx Ah Ejbw Working shaft/mixing shaft newly overhauled Powerful and robust technology Bowl illumination Connection: 400V, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm (W x D x H) Quality from a specialist workshop! Refurbished used machine, fully overhauled Options: Delivery service Leasing & rental service Ring gas burner Bowl Whisk Mixing paddle Scraper ring / bowl ring Maintenance contract Extended warranty E-box Service package Machine rental service Visit the largest selection of mixing machines in stock!

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Gjdpfx Ahoxgtkmj Eebw With feed device (pendulum arm) Drive power: 90–200 kW

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Including: + profile rotor for increased throughput Options: Double row of knives + 895 € net Veneer and paper scraper + 970 € net * Recommended for extremely thin materials with a thickness of less than 3 mm Our mütek MRZ 530 single-shaft shredder shreds a wide variety of materials such as all types of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cable, paper, cardboard and plastics. The machine is characterized by its robust design, which guarantees consistent quality in continuous operation. We will be happy to carry out a free test with your material. We invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we can document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Blades: multi-rotatable, Rotor diameter: 260 mm, Control: PLC Siemens S7-1200, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 qbm, throughput 1 - 5 hopper fillings / h, hydraulically operated pusher, Screen perforation of your choice (10 - 40 mm), suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30 % atro. Included as standard: - Fast hydraulics - Profile rotor - Switch cabinet with Siemens PLC control - Automatic star/delta start - Automatic OFF when the rotor is idling - Removable suction chute - Speed 70 - 100 rpm for higher throughput capacity - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Stable guides for the hydraulic slide Other shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + 5.980 € net - Conveyor belt and overbelt magnet control + € 2,750 net Godped Db N Iofx Ah Eobw (start and stop synchronized with the chipper) . Requirements for the output or raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,975 h, General Data Measurements width 1910 mm Measurements depth 3195 mm Measurements height 2720 mm Machine weight 4350 kg Control Unit Brand HEIDENHAIN Gsdpfxsxvfh Aj Ah Eebw Model TNC 640 Main Drive Tool taper HSK-A63 (standard: ISO40) Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 450 mm Additional Equipment T-slots: 16 × 100 mm (4 pieces) Speed: Standard: 12000 rpm /Optional: 18000 rpm or 24000 rpm Motor power: Heidenhain: 10/12.5 kW /Siemens: 10.5/15.8 kW /Fanuc: 11/15 kW/ Optional: 20 kW Axial Accuracy Control (AAC) / Spindle Vibration Supervision (SVS) / Tool-tip Positioning Control (TPC) Standard: 30 or 32 tools/ Optional: 40 tools Tool holder: BT / CAT / DIN 40 / HSK 63 /Change time (tool-to-tool): 1.55 s (50 Hz) / 1.31 s (60 Hz) Max. Tool dimensions: Diameter: Ø75 mm (Ø125 mm with empty neighboring compartment) / Length: 300 mm /Weight: 7 kg Tool changer (ATC) Type: Arm change ISO40 in-line spindle (12000 rpm, with CTS function) / Spindle oil cooler / Arm tool changer (30/32 tools) Coolant tank (20 bar) / Scraper chip conveyor / Linear encoder for all 3 axes / Backwash device / Flushing gun / Heat exchanger / 4th axis prepared (switching circuit) This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of 12,000 rpm, it ensures efficient machining. The machine includes a 30/32 tool arm changer and a rapid traverse rate of 36 m/min, enhancing productivity. Consider the opportunity to buy this AXILE V4 vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Gedpjp R R Dwefx Ah Esbw Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. CEE machine, incl. documentation Stationed: Denmark

Condition: good (used), Year of construction: 2012, Cooling/filter installation with vacuum filter Function: A vacuum pump directly connected to the filter drum's inner chamber draws the medium into the drum. During this process, contaminants are retained on the filter drum’s surface by a fine-mesh fabric. The vacuum increases due to the resistance caused by the accumulating filter cake. When a preset negative pressure is reached, the drum is automatically rinsed. An installed scraper chain removes the sludge. The system can be controlled either via a PLC controller or directly from the processing machine. Gbedpfoxrnvusx Ah Eow

Condition: used, Year of construction: 2011, AXA DBZ 40 - Vertical Twin-Station Machining Center - Heidenhain iTNC 530 CNC control with digital drive regulation - CNC with all controls on a movable control panel - Pendulum package - Increased spindle speed 30 - 8,000 rpm - 2 AXA RTA 2-300 face plates, 300 mm diameter, center height 200 mm - Counter bearing size 50, hydraulically clamped, center height 200 mm - Swiveling of rotary table axis by hand - Machine table extensions left & right 1350 mm each - Heidenhain direct linear measuring system on all axes - Hardened precision steel guides mounted on hand-scraped or ground bases – counter guides coated with Turcite - X-/Y-base slide, Z-column, slides, and headstock made from high-quality cast iron - Coolant system with integrated 100 l tank and pump for external cooling - Coolant through the spindle Gsdpfxsxu Ezmo Ah Eebw - Chip conveyor, mounted on the left - 2 IFS oil and emulsion mist extraction units - Spindle dust protection package (wipers) - Oil level monitoring - Automatic sliding doors - 2 hand cleaning guns - Spindle renewed in 2022 - Year of manufacture: 2011 Technical Data - X-axis travel: 2x 750 mm - Y-axis travel: 500 mm - Z-axis travel: 600 mm - Distance table to spindle nose: 180 - 780 mm Machine table: - Clamping area left and right: 1350 x 500 mm each - T-slots (3): 14 mm - Table load capacity with uniform, distributed load: 800 kg/m² Accuracy according to AXA inspection protocol: - Repeat accuracy: ± 0.005 mm - Positioning accuracy per 1000 mm per axis X/Y/Z: 0.015 mm Feed rates: - Max. feed force: 9000 N - Rapid traverse in X/X/Z: 25 / 25 / 20 m/min - Feed rate in all axes: 1 - 9999 mm/min Main drive / Spindle: - Main drive AC - hollow shaft motor 40 % duty cycle: 30 kW - Speed range, stepless: 30 - 8000 rpm - Spindle torque 40 % duty cycle: 143 Nm - Tool clamping: by drawbolt / disc springs - Tool clamping force: 12000 N - Spindle diameter in front bearing: 65 mm - Tool holder / drawbolt: SK40 DIN69871A/69872A Tool changer: - Carousel magazine slots: 22 - Tool change time: approx. 7 s - Chip-to-chip time: approx. 9 s - Max. tool weight / max. tool length: 8 kg / 400 mm - Tool diameter / with free adjacent pockets: 85 / 135 mm General data: - Electrical connection: 3x 400/230V/N/PE - Control voltage: DC 24 V - Dimensions (LxHxD): approx. 4200 x 2700 x 2300 mm - Weight: approx. 8,500 kg

Condition: used, Year of construction: 2018, Serial No. 42004, consisting of: CO2 laser, manufacturer Coherent, type HyperRapid NX / Diamond J-5, maximum laser power 57.2 W / 450 W, wavelength 1064 nm, max. pulse energy 1 mJ, touch display, glass plate loading station (input module), 4 belt conveyors, brushing and extraction station, type LN 265, enclosure, central module for loading and unloading the laser, scrap tilting module, including mobile extraction unit, picker module, portal-traversing vacuum glass gripper Gsdpfx Ahjwy U Dwo Eobw +++ Attention: This item is part of an online auction! +++

Condition: excellent (used), operating hours: 1,500 h, - rotary shear type MEWA UC 201 - Electric drive 2 x 75 kW - Rotor length approx. 2 meter - width of the knives 70 mm Gbodpfxexrl Dce Ah Eow - with chain conveyor for the outlet of the product It is a very powerful machine for shredding materials as tires or light scrap.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 12/2027, total length: 2,100 mm, total width: 1,100 mm, input frequency: 50 Hz, Spiral kneader / mixer Model: SP 220 MS LED control with temperature display / temperature control with rewind key Dough machine with 2 timers Tool speed adjustable for min / max. 10 - 220 kg of dough Flour dust hood and bowl scraper 2 tank wagons (340 liters) Gedpfx Ahof Etm Ne Esbw Standing machine with changing tools Stainless steel tools: kneading spiral, flat beater, whisk DGUV V3-tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Dimensions: 1100 x 2100 x 1500 / 2300mm, WxDxH NEW machine With a 12 month warranty Come to our sales center with baking equipment and many bakery machines.

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand MAKINO Model Pro5 Main Drive Godpfxjxtgm Ie Ah Esbw Number of axis 4 Table Table load 1200 kg Tools Max weight 20 kg Max tool diameter 100 mm Max tool length 690 mm Additional Equipment Spindle cooling Tank system with Knoll compact band filter, 3200 liters Coolant supply through the spindle Oil mist extraction Scraper belt conveyor Conversion kit for stand-alone operation (currently used as a system machine) This 4-axis Makino a81 horizontal machining center was manufactured in 2008. It offers robust capabilities for precision machining. Consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 8 manually adjustable supports in X-axis, 3 vacuum pods per console, Vacuum pump 100 m³/h -2* Vacuum connection for templates LED display for pod position indication Working area X: 200 – 6150 mm Working area Y: 0 – 1600 mm (milling/drilling), with edge banding 1525 mm Working area Z: 12 – 125 mm (clearance 150 mm) 14 vertical drilling spindles Horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 11 kW / 7.5 kW up to 24,000 rpm With C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer, traveling with y-support Edge banding unit VT 100, 4-sided/all-round – rotation range 740 degrees Gsdpfx Aexrltksh Eebw With dual roller magazine, automatic granulate feeding Adapter units: – Saw, fixed at 90° – 5-axis saw/drill/milling unit Vario NC – Horizontal cutter (corner notching) – Flush trimming and profile scraping blade with extension for flat scraper ICOS open control system with 17" TFT ImaWop 6.0 incl. MDE and production list software Chip conveyor Side safety fencing and front safety mats; Rear: requires wall placement or separate safeguarding

Condition: used, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Gjdpfx Aoxu E Nwjh Eobw Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° bevel of the mitre saws pneumatic milling unit, flush milling 6 mm, radius milling - chamfer milling - 15°, pneumatic via control panel scraper unit for chamfers and radii with 2 scraper holders pneumatic engagement and disengagement surface scraper unit - finish spraying device - PU machine is WORKSHOP REFURBISHED in TOP CONDITION

Condition: used, Year of construction: 2003, Used machine Gbodjwka Nyopfx Ah Eow Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs Gsdpfx Ahod N Dn Do Eebw etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc