Used Screw Chiller for sale (5,947)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Kdedpfxouzn Nno Ab Tjh Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 48,000 h, functionality: fully functional, pressure (max.): 12.5 bar, type of cooling: water, Equipment: type plate available, well-functioning variable speed screw compressor, water-cooled Ksdsykuqwjpfx Ab Tedh

Condition: used, all stainless steel loading height : ± 1.000 mm diameter of the screw : ± 350 mm Kdodsyf D Rcjpfx Ab Teh outfeed height ± 1.600 mm length of the screw : ± 3.100 mm dimensions hopper: ± 900 x 800 mm dimensions: (l x w x h): ± 3.200 x 900 x 2.300 mm mobile with bridge breaker (=extra screw)

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Kedpfxeyk Eyce Ab Tedh Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Year of construction: 2005, operating hours: 52,029 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 375 m³/h, pressure (min.): 6 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, USED KAESER SCREW COMPRESSOR BSD72SFC + REFRIGERATION AIR DRYER TD61 Installation consists of: - 1 x Kaeser frequency-controlled screw compressor BSD72SFC Capacity: 6.25 m³/min Pressure: max. 8.5 bar Motor power: 37 kW Total hours: 52,029 / load hours: 38,411 - 1 x Kaeser refrigeration air dryer TD61 Capacity: 7.0 m³/min Motor power: 1.1 kW - 1 x cyclone separator ZK04 with automatic condensate drain Capacity: 7.0 m³/min Kdodpfjykriqjx Ab Tsh - 1 x fine filter FF-71 Capacity: 7.1 m³/min

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET081P3-20 - 2200401041, cooling capacity: 22.5 kW (30.59 HP), type of input current: three-phase, type of cooling: water, overall weight: 475 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 3.82 m³/h, pump pressure: 3.82 bar, total width: 761 mm, total length: 1,862 mm, total height: 1,437 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 081 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 081P3-20 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -20°C to +46°C). Includes crankcase heater, phase monitoring, 140-liter buffer tank, and integrated P3 circulation pump. Additional Features: • Retrofit speed control for axial fans • Bypass valve between water outlet and inlet • Adjustment valves installed at water inlet and outlet • Closed filling system installed Kdodpfx Abjyk Euae Tsh • Bypass Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 22.5 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 3.82 Available pump pressure (bar): 2.69 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical Data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 12 Max. current (A): 20 Starting current circuit (A): 115 Protection class: IP54 Dimensions: Length (mm): 1862, Width (mm): 761, Height (mm): 1437 Weight (kg): 475 Connection: Rp 1 1/2" Serial No.: 2200401041 Year of manufacture: 2023 Condition: Visual grade 2, Technically sound Used Price: on request in EUR (plus VAT, ex Nettetal) – 3-month warranty Used machines may show visual signs of wear due to use. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), EXTRUDER SCREW & BARREL manufacturing machine CNC milling machine for extruder screws (thread and gear milling machine) Manufacturer: Wanderer TYPE: GF 34 CNC Year of manufacture: 1991 4-axis path control Siemens Sinumerik 3 M (GA4) with electronic handwheel, equipped with RF radial milling head for machining extruder screws, including climb milling unit, automatic chip conveyor, coolant system. Includes: 1 fixed steady rest, 2 clamping steady rests, 2 bushing jigs, 1 chuck, RF milling head, safety guard with sliding doors, operating key, machine manuals, control documentation, etc. Main drive: 20 kW DC Maximum workpiece diameter: 600 mm Milling length: 3000 mm Kodpfx Aeyldq Aeb Tsdh Thread pitch: 1 – 9999 mm Workpiece diameter over support: 160 – 320 mm Spindle bore: 120 mm Number of teeth min/max: 4 – 100 Tool holder: ISO 50 Stepless longitudinal feed: 1 – 5000 mm/min Workpiece weight: 2000 kg Electrical specifications – voltage/frequency: 380 / 50 V/Hz Total power requirement: 50 kW Machine weight: approx. 10,000 kg

Condition: new, Year of construction: 2025, The YMAE 130 air-water inverter scroll modular heat pump is a compact, reversible heat pump with a heating capacity of 129 kW at 50/55°C and 7°C ambient temperature, and a cooling capacity of 124 kW at 7/12°C and 35°C ambient temperature. The COP is 2.72. Due to its modular design, up to 6 units can be connected together. Refrigerant used: R454B, plate evaporator, without pump. Eligible for BAFA funding. Ksdpfx Aew S Df Tjb Tsdh

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Kjdpfx Aewbr N Heb Tsdh Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below Ksdoibichopfx Ab Tjdh - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Rehsler TAE EVO 602 Air-Cooled Chiller The Rehsler TAE EVO 602 is an air-cooled compact chiller from M.T.A. S.p.A., designed for outdoor use and equipped with an integrated buffer tank and pump. These units are intended as "fully equipped" solutions, allowing for quick installation and commissioning, as they combine all the necessary cooling components in a single housing. Key Features: Air-cooled: Suitable for outdoor installation. Compact solution: Includes an integrated buffer tank and circulation pump, enabling plug-and-play installation. Versatile Application: Designed for various cooling processes in a wide variety of applications. Fast Installation: Due to the integration of internal components and the possibility of quick assembly. Manufacturer: Rehsler Cooling Systems Model: TAE EVO 602 Voltage: 400 V Rated power: 61 kW Current consumption: 104 A Protection class: IP54 Max. Operating pressure: 6 bar Tank capacity: 500 liters Refrigerant: R407C / 2 x 14.5 kg Condenser: Air-cooled Rated compressor power: 4 kW P3 pump Water flow: 22.3/48 m³/h Power: 4 kW Centrifugal fan Total air flow: 420 Pa Total air flow: 40,000 m³/h Kjdpfjxgqzpsx Ab Todh Screw fan Total air flow: 42,000 m³/h Dimensions: Length (mm) 3,294, Width (mm) 1,255, Height (mm) 2,140 Weight: 1,345 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! Ksdpfxjttucgs Ab Todh International shipping costs on request!

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Kdedpfettv Ibex Ab Tsh Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Ksdpfoihiiiox Ab Tedh Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: excellent (used), Year of construction: 2008, operating hours: 112,351 h, functionality: fully functional, Kaeser ESD351 screw compressor, 200 kW with 8 bar and 36.80 m3/min. Air-cooled. Ksdpfx Aoyhb Iwsb Todh

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, Kaeser DSDX243SFC screw compressor, 132 kW with 8.5 bar and 26.90 m³/min. Integrated frequency converter. New compressor stage installed at around 45,000 operating hours. Kjdpfx Aeyhakkeb Tsdh

Condition: excellent (used), Year of construction: 2010, Refrigeration Dryer Manufacturer: Kaeser Kdodjykrbgopfx Ab Teh Model: TD 61 Year of manufacture: 2011 Max. volumetric flow: 6.3 m³/min Max. pressure: 16 bar Power: 1.25 kW

Condition: used, Atlas Copco GA132 for sale, Oil injected rotary screw compressor designed for heavy duty industrial applications. Delivers high capacity and continuous compressed air, suitable for manufacturing, automotive and packaging applications. 132Kw 25.79 cubic meter per min Ksdpfx Asyh I Rpob Tsdh 1547 cubic meter per hour 911 CFM 7.5 bar Fully serviced and ready to go Very good condition both inside and out

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition. Kjdpfeyg Dl Aex Ab Tsdh

Condition: used, Product supply bunker “Heckmann” with hopper ± 2.000L with driven shafts with fingers to separate the product input height: ± 3,400 mm 2 x 3kW, 1500 / 16 rpm dimensions (l x w x h) : ± 2.700 x 2.600 x 3.400 mm + Elevating spiral screw “Heckmann” Kdsdpfx Abeydk Ifj Tsh all stainless steel discharge height: ± 5.800 mm diameter of the screw : ± 600 mm length of the screw : ± 8.500 mm dimensions hopper: ± 1.300 x 1.000 mm dimensions: (l x w): ± 9.200 x 1.600 mm safety grille 5.5kW, 1500/20 rpm

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Atlas Copco GA160 screw compressor, 160 kW with 7.5 bar and 30.20 m3/min. Kedpsyg I Rcefx Ab Tjdh

Condition: used, Year of construction: 2012, functionality: fully functional, 2 units for sale Kedjylky Rspfx Ab Tedh

Condition: used, Year of construction: 2022, operating hours: 2,654 h, functionality: fully functional, machine/vehicle number: ITJ618556, overall weight: 403 kg, operating pressure: 9 bar, pressure (max.): 9.75 bar, We are offering a compressor with accessories for sale. It is in excellent visual condition and has 2,654 operating hours. Kjdjxtpmdspfx Ab Tedh

Condition: good (used), Year of construction: 2001, functionality: fully functional, KKT Kraus chiller model KLC-S 17T-RS with current refrigerant R407c. The water chiller has been tested at full load against a counter-heater, with no faults detected. Net price ex works, packed and loaded onto truck. Kdedpfx Aoyk Hlajb Tsh

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h Kdedpfx Aoyfm Spob Tjh • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.