Used Screwdrivers for sale (98)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm Rcjdpfxoxf Up Us Agzsk - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- Rcodpevu Hfdefx Agzok (technical data according to manufacturer - no guarantee!)

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece Rodpfxefc Hfvs Agzeck

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, Roller Conveyors for the Furniture Industry WTT Conveyor Technology Type 121 Total of 750 pcs. complete roller conveyors, each 3 m (Total – 2250 linear meters) Price for: 1 pc. = 80 EUR 5 pcs. = 300 EUR (total length 15 m) 10 pcs. = 500 EUR (total length 30 m) For larger quantities, price on request. Detailed description: Roller conveyor length L = 3000 mm Installation length EL = 500 mm Roller pitch T = 200 mm Roller conveyor height H = 280 mm, adjustable +/- 25 mm Number of supports FA = 1 pc. per running meter Consists of: 1. Side rails, each 3000 mm long, made of 20/80/40/3 mm profile, with 25 mm hole pattern, perforated to fit shaft diameter 12 mm, powder-coated in RAL 6011 green. Redpfxowwmkdo Agzock 2. Insertable load-bearing rollers Series 4.5.80.1.12.1.5.00 Steel tube – 80 x 2.0 mm wall thickness, Axle – 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of carrying rollers untreated steel. Installation length EL = 500 mm 3. Bolt-on bridge support feet in robust welded construction made of special profile with cross beam, height adjustable +/- 25 mm via M16 threaded spindle with screwdriver slot. With base plates for floor mounting and dowel hole. Powder-coated in RAL 3000 red Weight – 2.5 kg. (Technical data subject to change and errors excepted. Intermediate sale reserved.)

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Redpsu Imlhsfx Agzock Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Rcsdpfx Ageux Shvozsk Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: new, Manual hand unit Nein J/N Automatic for single pieces Ja J/N Automatic for frames Nein J/N Clip set "351" on the loose item ----- Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis Rcodpfxjkx Stns Agzok - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow ----- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm ----- Total price of the machine ex works: on request! Freight costs within Germany: on request ! Installation, commissioning and instruction within Germany: on request ! ----- Video shows version with extra infeed belt and outfeed belt with pusher. Not included in the basic price. Can be offered as an option if required. (technical data according to the manufacturer without guarantee!)

Condition: good (used), Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm Redpfxjfc Hfxj Agzeck -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Condition: new, range L-W-H 780x480x105 mm Redpfxou Impge Agzjck weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: used, Handling Device, Handling System JÄGER HANDLING Rcodpfx Agsfgpfmezsk Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: new, Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). Rcedpfx Asd Ih Husgzek RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warra...

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 740 watts Rcjdpfx Asfc Hfysgzek -Max. Drill: Ø 13 mm -Connection: 220 volts -Number: 2x drilling machines available -Price: per piece -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" knee joint 55 mm. 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Rodpfxeu Imnpo Agzeck Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Rcedpfx Ashxvu Esgzsk Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder Rcedpfx Agjd Scptjzjk -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Rsdju Impyopfx Agzock Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Rcedpegbpuhofx Agzek Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning Rcjdpfx Aou Imk Rsgzjk fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Rcsdpfx Aeuzn Nnogzek Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4" inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8" inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2" inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth sockets M8,M10,M12 Five Star Nuts TS10,TS15,TS20,TS25,TS27,TS30,TS40,TS45,TS50 - Accessory 3/8" inch ratchet: Attachment for bits Torx nuts without bore T40,T45,T50,T55,T60,T70 Torx nuts with bore TT40, TT45, TT50, TT55, TT60, TT70 Imbus Nuts – H7,H8,H10,H12,H14 Slotted nuts SL8,SL10,SL12 Cross nuts PZ3,PZ4, PH4,PH8 - Accessory 1/2" inch ratchet: Snack H14,H17,H19,H22,H24 Snack H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Redpfx Aou Img Sogzjck short essay, long essay, medium essay, Torx T30,T45,T50, allen key H7 + Drawer 3: - open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring wrench set 8 pieces 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision engineering screwdriver Slot: SL3.0 x 100mm, Cross : PH0 x 100mm - Screwdriver with soft grip and external hexagon: Slot: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8x150mm Cross : PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7x80 ; T8x80 ; T9 x 80 ; T10x80 ; T15x100 ; T20x100 ; T25x100; T27x100 T30x100 ; T40x150. + Drawer 5: - T-handle imbus / hexagon set with ball head: 3 x 115mm; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + drawer 6 - Circlip pliers set inside/outside 4 pieces, 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle nose pliers, curved needle nose pliers, pipe wrench. - Claw hammer, grain 3mm,4mm,5mm,6mm,7mm,8mm.

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. Rjdsh Ap Idopfx Agzeck 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Rcedpsu Imhcjfx Agzjk Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Rcjdsfx Hyfjpfx Agzek Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: new, range L-W-H 745 x 525 x 915 mm weight 93,5 kg 7 St. Workshop trolley filled with 283 quality tools. Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 4 heavy duty wheels 125 x 50 mm. including 2 swivel castors with brakes, 2 keys. Tool trolley is equipped with 283 tool parts, including: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 9 - 22mm and Torx from 8 - E20, 1/2" from 8 - 32mm. 3 sets of ratchet ring wrenches from 8 - 19mm, Rsdpfx Agju Imk Djzjck Ring spanner set from 6 -32mm. Various screwdriver sets, bit sets for socket wrench sets, various Allen keys and much more. See pictures.

Condition: used, Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, straight screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary ring control) - Without screwdriver switch-off - Compressed air control line Ø 4 mm - Compressed air connection for screwdriver function min. Ø 10 mm - Aluminum holder for handling device - Screw feed Ø 12 mm (inner diameter) Rsdpfefgrrhox Agzeck Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 4 pieces available, price per screwdriver