Used Second Operation for sale (33,523)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound-dampening hood, DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With mounted refrigeration dryer, 660 l intake capacity, 520 l delivery rate - 10 bar - Weight 245 kg Fgodoypkr Ujpfx Abaei - Sound-dampening hood - Condensate drain 4 kW, 400 Volt - Width 960 mm, Depth 740 mm, Height 1905 mm - Noise level 69 dB (A) - Very few operating hours - ABSOLUTELY LIKE NEW - TÜV inspection valid until August 2026, with corresponding inspection certificates Transportation available for an extra charge!

Condition: used, machine/vehicle number: P21173V00135, Year of construction: 2019, operating hours: 4,538 h, load capacity: 1,600 kg, lifting height: 2,844 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 800 x 1,915 mm Weight: 1,300 kg Battery voltage: 24 V Battery capacity: 375 Ah Battery year of manufacture: 2019 Battery voltage at rest: 24.8 V Operating hours: 4,538 h EQUIPMENT Initial lift Integrated scale Battery charger Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Fgodpfx Abj Ahrd Hsaei Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 316

Condition: used, operating hours: 2,512 h, lifting height: 3,390 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-22 diesel forklift, year of manufacture: 2014, operating hours: only 2,512h!, previous owner: German Armed Forces (Bundeswehr), rated load capacity: 2,200 kg, lifting height: 3,390 mm, duplex mast, hydraulic side shifter, full cabin, diesel engine: [30 kW / 41 HP], fork length: 2,400 mm, weight: 3,748 kg, in good condition!, ready for immediate use! Upon request, we will provide a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For further information, please visit our website. Errors and prior sale are subject to change! Cabin, rental possible. Fjdps Aintqofx Abasgi = Further information = Year of manufacture: 2014 Lifting capacity: 2,200 kg Overall height: 230 cm Please contact Tobias Ebert for further information.

Condition: used, JBM Wood Chipper, Model 630 MDX, mounted on a single-axle chassis / car trailer > Kubota diesel engine, 44 kW (60 hp) > Spring-suspended, braked single-axle chassis > Wide infeed opening: 310 x 220 mm > Log diameter up to 220 mm > Adjustable wood chip length: 0–25 mm Fedj Aftn Tspfx Abasgi > Weight: approx. 1,690 kg > Only 133 operating hours! > Year of manufacture: 2008 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = More information = Year of manufacture: 2008 Payload: 1,750 kg GVW: 1,750 kg Please contact Tobias Ebert for more information.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,568 h, load capacity: 2,500 kg, lifting height: 6,640 mm, free lift: 2,150 mm, load center: 500 mm, fuel type: electric, mast type: simplex, battery capacity: 775 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), total height: 2,925 mm, Equipment: 3rd hydraulic function, CE marking, UVV, full service history, sideshift, Still RX 60-25 L electric forklift with the following technical specifications: · Operating hours: 2,568 · Lifting capacity: 2,500 kg · Lifting height: 6,640 mm · Overall height: 2,925 mm · Year of manufacture: 2016 STILL 2.5-ton electric forklift with front and roof windshield, very good battery, non-marking tires, triplex mast with full free lift, integrated side shifter, lighting, single-pedal operation, multi-lever control, fork length 1,200 mm (other fork lengths available on request), charger. Includes 1,000 hours of service according to STILL manufacturer specifications and a valid UVV inspection upon sale. Fsdpfx As Adnx Robaegi Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively with our own ramp-type low-loader (transport costs upon request). Further information and offers can be found on our website.

Condition: used, power: 20 kW (27.19 HP), For inquiries regarding the attachment, please contact Mr. Herden (at the telephone number provided). Weber TRC 86 - Compaction Roller - Year of manufacture: 2020 - with radio remote control - 143 operating hours Price: 14,890.00 € net / 17,719.10 € gross Operating weight according to CECE: 1,390 kg Tire width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Climbing ability: 50% depending on the ground Working/travel speed: m/min depending on the ground Drive system: hydrostatic, four tires Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 hp Engine power at operating speed: 15.6 kW / 21.3 hp at 2600 rpm The machine has a radio remote control. The remote control is charged in the roller. Upon request, we will also provide you with a financing offer. We are the official Westtech sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Holp sales and service partner. We are the official DMS sales and service partner. We are the official Seppi M. sales and service partner. We are the official Magni telehandler sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Fjdjznrwhjpfx Abaegi Year of manufacture: 2020 Operating hours: 143 Unladen weight: 1,390 kg Please contact Marius Herden for further information.

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 90288969, Year of construction: 2008, operating hours: 8,556 h, load center: 600 mm, fuel type: electric, construction height: 3,375 mm, battery capacity: 300 Ah, battery voltage: 24 V, battery weight: 303 kg, empty load weight: 880 kg, total height: 1,950 mm, total length: 2,348 mm, total width: 800 mm, Equipment: CE marking, UVV, full service history, We offer this Jungheinrich ERC 212 electric pallet truck with platform, year of manufacture 2008, for repair. Fedpfx Abszpwtwoajgi Manufacturer: Jungheinrich Model: ERC 212 OPTION 115 410 ZT Year of manufacture: 2008 Condition: for repair Category: 1919 Type: Electric pallet truck with platform Battery fully refurbished in September 2023; it has hydraulic problems. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Fedpfx Abe Ahzl Dsaegi Table size: 800 x 420 mm Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Operating hours: 2,384 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,150 mm Operating hours: 2,384 h Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery year of manufacture: 2019 Battery idle voltage: 24.7 V MACHINE DETAILS Manufacturer: Linde Type: T20AP Year of manufacture: 2019 Own weight: 800 kg Overall length: 1,900 mm Overall width: 800 mm Overall height: 1,000 mm EQUIPMENT Fsdpfez R Rd Esx Abaegi Battery charger Previously a Linde full-service unit Functional and condition video available All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 452

Operating hours: 12,087 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,760 mm Free lift: available Mast type: Triple mast Fork length: 1,600 mm Hydraulically adjustable forks: available Side shifter: available Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E25L EVO Year of manufacture: 2018 Drive type: Electric Operating hours: 12,087 h Battery: 80 V / 575 Ah Battery year of manufacture: Battery voltage at rest: 84.3 V Self-weight: 4,800 kg Overall length: 4,100 mm Overall width: 1,150 mm Overall height: 2,176 mm Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Full cabin Heater Windshield wiper Fork positioner Side shifter Tilt angle display Facelift model All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Fgjdoz R Dvmspfx Abaei If collection is not carried out within the specified period, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 102

Condition: used, operating hours: 1,556 h, lifting height: 3,440 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-22 diesel forklift, year of manufacture: 2013, operating hours: only 1,556h!, previous owner: German Armed Forces (Bundeswehr), rated load capacity: 2,200 kg, lifting height: 3,440 mm, duplex mast, hydraulic side shifter, fully enclosed cabin, diesel engine: [30 kW / 41 HP], fork length: 1,800 mm, weight: 3,915 kg, in good condition!, immediately ready for operation! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. You can find more information on our website. Errors and prior sales are subject to change! Fgedpfx Ao Aintujbaji Cabin, rental possible. = Further information = Year of manufacture: 2013 Lifting capacity: 2,200 kg Overall height: 225 cm Please contact Tobias Ebert for more information.

Operating hours: 9,926 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H25D-02 EVO Year of manufacture: 2015 Operating hours: 9,926 h Drive type: Diesel Lifting equipment Mast type: Triplex mast Full free lift: available Lifting height: 4,723 mm Fork length: 1,200 mm Load capacity: 2,500 kg Side shifter: available 3rd hydraulic valve: available MACHINE DETAILS Dimensions and weight Length: 3,800 mm Width: 1,200 mm Height: 2,154 mm Own weight: 3,770 kg Maintenance and inspection Next service due in: 734 h UVV (German Industrial Safety Regulation) valid until: EQUIPMENT Semi-cabin Windshield wiper LED work light (front) Blue Safety Light (rear) Comfort seat with lumbar support Seat heating Side shifter 3rd hydraulic valve Triplex mast with full free lift Fsdpez R Duiefx Abasgi All dimensions are rounded figures. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 91

Condition: used, power: 14 kW (19.03 HP), color: yellow, first registration: 06/2018, Equipment: cabin, = Additional Options and Accessories = - Enclosed cab Fedpo Ahywpefx Abaogi = Notes = Caterpillar 301.7D mini excavator Year of manufacture: 2018 Operating hours: 1,628 Serial number: CAT3017DALJH06775 Weight: 1,977 kg Engine power: 13.8 kW Equipment and options: - Powertilt - 3 buckets - Additional hydraulic lines - Dozer blade - Rubber tracks - Enclosed cab - Heater - Joystick control Compact Caterpillar 301.7D mini excavator from 2018 with only 1,628 operating hours. The machine is equipped with a powertilt, 3 buckets, and additional hydraulic functions. Suitable for earthmoving, gardening and landscaping, and work on smaller construction sites. More photos and videos available upon request. Haverhoek Trucks B.V. Tel/WhatsApp: Website: = Additional Information = Year of construction: 2018 Model year: 2018 Operating hours: 1,630 Drive: Track Unladen weight: 277 kg Payload: 1,700 kg GVW: 1,977 kg CE marking: yes

Operating hours: 4,375 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Number of wheels: 3 Operating hours: 4,375 h MACHINE DETAILS Manufacturer: Linde Fodpfx Aboz R Dwweasgi Type: E16 Year of manufacture: 2020 Drive type: Electric Own weight: 3,500 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm Battery year of manufacture: Battery voltage: 48 V Battery capacity: 625 Ah Battery voltage at rest: 50.8 V Battery charger: Not available EQUIPMENT Side shifter 3rd hydraulic valve Full cabin Cabin heater Windshield wiper LED work light, front LED work light, rear Tilt angle display Service valid until: 12/2026 Safety inspection valid until: 12/2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 124

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,298 mm, turning diameter: 275 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 15 W, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, spindle nose: JIS A2-8, Equipment: documentation/manual, We are offering this well-maintained CNC lathe, complete with powered tool, sub-spindle and Y-axis. It is a 2008 Mori Seiki NL 2500SY/1250 fitted with the MSX-850-III (Mitsubishi) control system. Technical specifications: Turning diameter: 275 / 366 mm Spindle bore diameter: 80 mm Spindle speed main spindle: 4000 1/min Spindle motor main spindle: 18.5/15 Kw Spindle speed second spindle: 6000 1/min Spindle motor second spindle: 11/7,5 Kw Movement X-axis: 260 mm Movement Y-axis: +50 / -50 mm Movement Z-axis: 1345 mm Movement W-axis (subspindle to mainspindle): 1275 mm Min. indexing C-axis: main spindle 0,001 ° Min. indexing C-axis: second spindle 0,001 ° Number of tools on turret: 12x Number of driven tools: 12 x Spindle motor driven tools: 6000 1/min Fjdpsz Nd Dhsfx Abasgi Tool Taper: BMT Bar feeder LNS Quick Load Servo lll We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Operating hours: 1,853 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,574 mm Fork length: 1,150 mm Operating hours: 1,853 h Battery voltage: 24 V Battery capacity: 410 Ah Battery voltage at rest: 25.5 V Battery year of manufacture: 05/07/2019 Fgjdez R D D Rjpfx Abasi MACHINE DETAILS Manufacturer: Linde Type: D12HPAP Year of manufacture: 2019 Own weight: 1,400 kg Overall length: 2,200 mm Overall width: 800 mm Overall height: 1,315 mm Service valid until: UVV (Occupational Safety Inspection) valid until: EQUIPMENT Lithium-ion battery Initial lift for two pallets simultaneously Ground clearance for uneven floors Integrated scale Functional and condition video available All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 310

Condition: excellent (used), For sale: Constantin Hang 103 LOK die-cutting machine, a product from a renowned German manufacturer. This device is designed for the precise die-cutting of paper, cardboard, leather, felt, rubber, and other soft materials. The machine is equipped with an electric drive, foot pedal control, and a robust work table with a material guide, ensuring comfortable and precise operation. Thanks to its robust construction, the device is characterized by high durability and reliability. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Fedez Sm T Sepfx Abajgi Model: 103 LOK Machine number (Serial no.): 9578 Type: die-cutting machine Drive: electric Control: foot pedal Motor: Georgii KRD 328 Power supply: 220/380 V Motor power: 240 W Frequency: 50 Hz Motor speed: 680 rpm Work table with guide Robust steel construction Condition: Used. Functional. Shows normal signs of wear and tear due to age and use. Visual condition consistent with the photos.

Condition: used, gearing type: automatic, lifting height: 44,000 mm, Sennebogen 673e Crawler Telescopic Crane Year of manufacture: 2018 Operating hours: 4,093 h Lifting height including boom: 44 m (36 m + 8 m) Lateral reach: 38.5 m Pick & Carry with up to 100% of rated load capacity incl. folding jib tip 8,000 mm (can be mounted without auxiliary equipment) Adjustable undercarriage up to 4,800 mm (transport width: 2,980 mm) Electro-hydraulic emergency power unit Radio remote control Radio Programmable work area limitation Tiltable cab up to 20° Rear and side cameras Diesel heater Fuel transfer pump Air conditioning system Central lubrication system Engine: Cummins B6.7 [168 kW/228 hp] Stage 5 Fgjdpfjzg Abhex Abaoi Total weight: 71,500 kg Undercarriage ballast: 8 tons Rear ballast: 17.8 tons Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Cab, rental possible = Further information = Year of manufacture: 2018 Operating hours: 4,093 Engine brand: Diesel Lifting capacity: 70,000 kg Please contact Tobias Ebert for further information.

Condition: used, SolidHub Electric High Lift Pallet Truck The electric high lift pallet truck has only 76.3 operating hours. It features a maximum lifting height of 4,000 mm, a load capacity of 1,200 kg, and a foldable operator platform with side guardrails. The electric high lift pallet truck is particularly suitable for: • Warehouses and logistics • Order picking • Loading and unloading • Internal pallet transport • Loading and unloading in pallet racking • Technical data • Manufacturer: SolidHub • Model: CDD12-030 • Load capacity: 1200 kg • Lifting height: 4000 mm (4 meters) • Load center: 600 mm Fodpfx Ajz Hx Izsbaegi • Fork width: 550 mm • Fork length: 1150 mm • Recommended battery capacity: 210 Ah • Weight without battery: 978 kg • Serial number: 080127N1700 • Operating hours: 76.3 h Equipment • Electric lifting and driving system • Foldable operator platform • Side guardrails • Ergonomic tiller control • Electric lifting and lowering function • Battery charge level indicator • Emergency stop switch New price: €7,860.00 (gross)

Operating hours: 1,801 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Fgjdpfoz R D E Uox Abaoi Battery capacity: 375 Ah Battery type: 3 PzS Battery resting voltage: 24.6 V Operating data Operating hours: 1,801 h Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) certificate valid until: 09/2027 MACHINE DETAILS General Manufacturer: Linde Type: T20AP Year of manufacture: 2022 Dimensions and weight Overall length: 1,900 mm Overall width: 800 mm Overall height: 1,000 mm Own weight: 800 kg EQUIPMENT Fronius battery charger Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 331

Condition: used, machine/vehicle number: FN615011, Year of construction: 2020, operating hours: 6,090 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 3,800 mm Fork length: 2,000 mm Fork carriage width: 2,200 mm MACHINE DETAILS Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,250 x 1,900 x 2,800 mm Own weight: 7,290 kg Operating hours: 6,090 h EQUIPMENT Previously a Jungheinrich full-service unit Hydraulic valves: 3rd and 4th valve Dual tires on the front Comfort seat Fork carriage with side shift All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Fgodpe Ahwf Refx Abaoi If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 51

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz Fjdpfxjzcpixj Abasgi - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Operating hours: 7,209 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,400 kg Lifting height Lifting height: 1,844 mm Forks Fork length: 1,150 mm Battery Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Measured idle voltage: 25.5 V Operating data Operating hours: 7,209 h MACHINE DETAILS General Manufacturer: Linde Type: L14AP Year of manufacture: 2022 Own weight: 1,400 kg Dimensions Overall length: 210 mm (?) Overall width: 800 mm Overall height: 1,490 mm Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 EQUIPMENT Folding platform Lithium-ion battery Charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Fjdpfoz R Rfpox Abaogi If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 464

Operating hours: 14,081 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fsdjz R Dzpopfx Abaegi Mast Mast type: Duplex mast Lifting height: 4,450 mm Fork length: 2,000 mm Side shifter: present 3rd hydraulic valve: present 4th additional valve: present, free for fork positioner Free-lift mast: without central hydraulic cylinder Tilt angle indicator: present Drive and Performance Drive type: LPG Load capacity: 3,500 kg Operating hours: 14,081 h Inspection and Maintenance UVV valid until: 05/2027 Next service due in: 420 h MACHINE DETAILS General Manufacturer: Linde Type: H35T EVO Year of manufacture: 2019 Own weight: 5,030 kg Dimensions Overall length: 4,800 mm Overall width: 1,350 mm Overall height: 2,964 mm EQUIPMENT Full cabin with heater and windshield wiper LED work light front LED work light rear Safety Light rear Safety Light side Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 189

Condition: used, CAT 301.7D mini excavator, year of manufacture: 2015, operating hours: only 1,912!, MS01 quick coupler, engine: [13.4 kW/18 hp], 1x backhoe bucket 300 mm, 1x rigid trenching blade 1,000 mm, 2x auxiliary hydraulic circuits, weight: 1,977 kg, tracks 80%, good condition, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! = Further information = Year of manufacture: 2015 Operating hours: 1,912 Drive: Tracked Fsdszaigxopfx Abaegi Please contact Tobias Ebert for further information.