Used Second Operation for sale (27,225)

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM Iaodjx Trgcopfx Ahyel MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: used, machine/vehicle number: 5xxxx, Year of construction: 1985, Please contact ATS Norway for more information Please provide reference number upon request: 22140 Iaodpfx Asx Uwa Dshyel Specifications: 1985 model Crane has been in operation and approved until March 2024 Jib length: 28 m Hook height: 20 m Max load: 3,000 kg (4-fall) up to 9.9 m Load moment: 750 kg at 28 m Drawbar and brakes must be repaired before towing Radio control replaced New charger and batteries for remote control Counterweights included Ready for delivery Description: Potain tower crane from 1985.The crane has been approved and in use until 2024.Ready for delivery. Own weight: Model: 1985 Potain 325B tårnkran

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. Iodpfjl Tnz Eox Ahyoal We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Ijdpfx Ajv Igghjhyeal Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD2200 FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 45° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET. ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. Swing Over the Bed Ø 550 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 380 MM Maximum Turning Length 565 MM Bar Capacity Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” – 203 MM 10” - [254] MM Spindle Bore Ø 76 MM Spindle Speed (rpm) 4,500 RPM Motor (Max/Cont.) 18.5 / 15.0 KW Torque (Max/Cont.) 206 / 125.3 NM Spindle Type BELT Spindle Nose A2-6 FEED Travel X 215 MM Travel Z 580 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.12 SEC / STEP TAILSTOCK Taper MT 4 Quill Diameter Ø 65 MM Quill Travel 80 MM Travel 513.7 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 23 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W) 2,925 x 1,650 MM Height 1,820 MM Weight 4,100 KGS INCLUDED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD OIL SKIMMER BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ Iodex Tqppepfx Ahysal QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) MACHINE MANUALS & OPERATOR HANDBOOKS TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK - 4MT WITH STD LIVE CENTER

Condition: used, machine/vehicle number: F62xxxx, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20901 Specifications: Power output: 250 kVA Operating hours: 94 Iedpfswwqflex Ahyoal Voltage: 230/133 V Current: 626 A Frequency: 50 Hz Volvo TD160 engine Description:Newage Stamford generator offered on behalf of customer.Only 94 operating hoursIdeal for industrial use, backup power or construction sites.Ready for delivery.

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, Iaedpfx Aev Igg Iehyjl LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA SE2200LY WITH FANUC 0i-T PLUS CONTROL CNC LATHE WITH Y AXIS. TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HIGH PERFORMANCE ROLLER LM GUIDEWAYS. ▪ 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION OPTION] ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 30 X 36 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ C-AXIS SPINDLE & WEDGE TYPE Y-AXIS. Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 600 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 508 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 75 MM Spindle Speed 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max / Cont.) 167 [150.3] NM Spindle Type BELT Spindle Nose A2-6 FEEDS Travel X 210 MM Travel Y 110 (± 55) MM Travel Z 560 MM Rapid Speed X 30 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDEWAYS TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP Y-Axis Type WEDGE TYPE Milling Tool Speed 6,000 RPM Motor (Max / Cont.) 2.75 / 1.85 [2.8 / 3.8] KW Torque (Max / Cont.) 26.2 [27.0] NM Collet Size ER 20 - Ø 13 Type BMT45 HYDRAULIC NC TAIL STOCK (STD. LIVE CENTER) Taper MT#4 Quill Diameter Ø 56 MM Travel 580 MM Coolant Tank 200 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH Iaodpfx Asx Tqkmohysl Floor Space (L x W) 2,960 X 1,730 MM Height 1,920 MM Weight 4,200 KGS STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3-JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 200 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER FRONT DOOR INTERLOCK TOOLBOX MAIN SPINDLE - 4,500 RPM, 15.0 / 11.0 KW, 167 NM BELT DRIVEN STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE HYDRAULIC TYPE NC TAILSTOCK - MT#4 56 MM QUILL, STD LIVE CENTER 12 STATION BMT45 TURRET, LIVE TOOLS 6K RPM, 2.75 KW, 26 NM INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO QUILL FORWARD / REVERSE CONFIRMATION DEVICE

Condition: used, Year of construction: 2008, operating hours: 9,800 h, Please contact ATS Norway for more information Please provide reference number upon request: 21986 Specifications: Year: 2008 Hours: approx. 9,800 20,000 kg Grading bucket S70 quick coupler Extra lights Tilt beam Radio/CD Climate control/AC Description:CAT 319DL tracked excavator from 2008.The boom was welded when the owner purchased the machine. It has run approx. 4,000 hours since the welding and has performed well in their operation.Service has been carried out internally as needed.S70 quick coupler.Can be delivered at short notice. Hours: 9800 Iaodpox Dqrpsfx Ahyjl Own weight: 20000

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21658 Isdpsxq Dmaofx Ahyoal Specifications: Break room Storage Ready for delivery Description:Letthus cabin with break room and storage area.The storage room is behind the second door — it was locked, so no pictures were taken.Ready for delivery.

Condition: used, machine/vehicle number: 1NKDLB0X05J08xxxx, mileage: 700,000 km, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 21709 Specifications: Iaodpoxu A H Tefx Ahysl Model year: 2005 Mileage: approx. 700,000 km (increasing) EU approved until 15.05.2026 Rhodes body 3-stage check brake Suspension: Parabolic front Euro 3 Wheelbase: 324 cm Payload: 19 tons 494 hp 8x4 Tires (see pictures) Summer tires front Studded winter tires front All-season tires rear Chains 8LL gearbox CAT C15 turbo Heated mirrors Insulated and new mats in cab floor Air-operated tailgate Air-driven hook (European standard) Body vibrator Cameras front, rear, and on roof New work lights Slight oil sweating on servo (passes inspection) Small leak on tipping cylinder AC / climate control Radio Delivery by agreement Description:2005 KENWORTH T800 tipper truck 8x4 with Rhodes body, compressor, and body vibrator.Very high payload capacity: 19 tons!Some minor sweating and small leaks on the servo, but it passes inspection.Equipped with cameras front, rear, and on the roof.New work lights installed.Right rear brake chamber replaced.Delivery by agreement. Km: 700000 HK: 493 Technical approved: Yes EU-approved until: 15.05.2026 Own weight: 12080 Total Weight: 32000 Payload: 19845 Width: 255 Length: 816 Euro: 3 Model: 2005 KENWORTH T800 tippbil 8x4 m/ Rhodes påbygg, kompressor, vibrator i kassen. Høy lasteevne! SE VIDEO.

Year of construction: 2016, condition: used, Serial number: 01-Fxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21955 Specifications: 2016 model Hours: 90 kW Undercarriage (see photos) 3 fractions Steel on feeder See video Delivery by agreement Description:2016 Keestrack Frontier screening plant.The hours will increase as the machine is in daily operation.Delivery by agreement. Own weight: 111 Iodox A R Uzjpfx Ahyjal Model: Frontier sorteringsverk. SE VIDEO

Condition: used, machine/vehicle number: XL9K0C5021105xxxx, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21926 Specifications: Model year: 2011 New EU inspection will be carried out Length: 1367 cm Wheelbase: 130/181 cm Permitted payload: 31,819 kg Full side opening and roof opening 33 pallets Tires (see photos) Remote control Walking Floor operated by cable Water tank that can be connected to a pressure washer Axle 3 has been replaced Bolt replaced and adjustment washer mounted on axle 3, left side New shock absorbers and four bolts on axle 2, both sides Delivery by agreement Description: 2011 Knapen KCW Walking Floor.A new EU inspection will be carried out on the trailer.It is possible to connect a pressure washer; the owner states it has not been used for several years.Delivery by agreement. Technical approved: no Iaodpjx Dqqrofx Ahysl EU-approved until: 30.11.2025 Own weight: 11181 Total Weight: 43000 Payload: 31819 Width: 255 Length: 1367 Model: Kcw Walking floor 33 pallers

Condition: used, Year of construction: 2015, Serial number: CAT0320EANAZ0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20996 Specifications: 2015 model Hours: approx. 8,500 (can increase) Iaedpfx Ajwzg Abohyel Weight: 22,400 kg 112 kW Undercarriage (see photos) Track width: 60 cm Total width: 299 cm Central grease SMP quick coupler R6 Rototilt Grading bucket, 190 cm wide Digging bucket Trimble GPS Rear-view camera Tilt rotator beam Extra lights Radio/CD Climate control/AC Video attached Delivery by agreement Description:Well-maintained 2015 CAT 320 tracked excavator.The machine is in good condition and has 8,500 hours. It is in daily operation, so hours will increase.Sold with GPS, Rototilt, and 2 buckets.Delivery by agreement. Own weight: 22400 Model: 320EL Beltegraver m/ GPS, Rototilt og 2 skuffer.

Condition: used, Year of construction: 2018, operating hours: 1,850 h, Serial number: YT08-3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21740 Specifications: 2018 model Hours: Approx. 1,850 (may increase) Operating weight: 8,180 kg 42 kW Iedpfxsxu A Nne Ahyjal Undercarriage (see pictures) Track width: 45 cm Blade Total width: 230 cm S50 quick coupler Rototilt Digging bucket Grading bucket 2019 Intermercato grapple Rear-view camera Side camera Rotating beacons Radio/CD Climate control/AC Expected delivery: December 15 Description:Kobelco SK75SR tracked excavator from 2018.The machine has only run 1,850 hours and is in good condition.Sold with rototilt, two buckets, and grapple.Expected delivery December 15. Hours: 1850 Own weight: 8180 Width: 230 Kw: 42 Model: 2018 Kobelco SK75SR-3E m/ Rototilt, 2 skuffer og Klype. 1850 timer!

Condition: used, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20763 Specifications: Approx. 2006-2007 model (stated by owner) Total hours: 13,800 (can increase) Chassis (see pictures) Central grease, some manual points Comes with an extra jaw (recently replaced) Iajdpowvzraofx Ahyel Hanging sieve Tape and rolls (see pictures) Main band completely overhauled with new band and side edges Daily operations Video is attached Deutz engine (provided by owner) Ready for delivery Notes: An output psb nd is worn Own weight: 48000 Model: Ca. 2006 Sandvik 1208 Knuser med Sandvik hengesikt. God stand!

Condition: used, Year of construction: 2020, operating hours: 6,450 h, Drive: Wheel CE mark: yes Serial number: VCEW160EV0032xxxx Please contact ATS Norway for more information Iajdjx Nl Rajpfx Ahysl Please provide reference number upon request: 22099 Specifications: Model: 2020 Hours: 6450 (may increase) Weight: 19,900 kg Power: 115 kW Tires (see pictures) Trailer hydraulics Blade Total width: 255 cm Steelwrist Rototilt with grab Excavation bucket Grading bucket Rotary beam Extra lights Radio/CD Climate/AC Delivery by agreement Notes: Trailer and GPS are not included Description: Volvo EW160E wheeled excavator from 2020 for sale! The machine has only operated for 6,450 hours. It is in daily use, so the hours may increase. It is sold with rototilt and two buckets. Delivery can be arranged. Hours: 6450 Own weight: 19900 Year controlled: no Width: 255 Kw: 115 CE: Yes Model: 2020 Volvo EW160E Hjulgraver m/ Rototilt og 2 skuffer

Condition: used, Year of construction: 1984, operating hours: 20,260 h, Please contact ATS Norway for more information Please provide reference number upon request: 22071 Ijdpfx Ahsx Iqaqjyoal Specifications: Approx. 1984 model Hours: approx. 20,260 Undercarriage (see photos) Track width: 65 cm Overall width: 310 cm New radiator included Digging bucket Services performed by owner Ready for delivery Description: Åkerman H14 crawler excavator with digging bucket.According to the owner, the machine operates as it should.A new radiator is included. Ready for delivery. Hours: 20260 Own weight: Width: 310 Model: Ca. 1984 Åkerman H14 Beltegraver m/ Graveskuffe

Condition: used, Year of construction: 2019, operating hours: 4,150 h, Please contact ATS Norway for more information Please provide reference number upon request: 21988 Specifications: - 2019 model - Hours: approx. 4,150 - 128 kW - 23,000 kg - 3 buckets - Full track controls - Grab box - Hammerglass - CAT premium chair - Leica mc1 GPS with bucket recognition - Large light package - Flashers all around - Multig-x coupling for hydraulics Isdpfx Aex Dqr Aohysal - Radio/cd - Climate/Ac Description: CAT 323 Crawler excavator sold with 3 buckets and Leica GPS. There is bucket recognition on the GPS. It has been serviced and is ready to be put into operation. Can be delivered within a short time. Hours: 4150 Own weight: 23000 Kw: 128

Condition: used, Year of construction: 2018, operating hours: 6,208 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21262 Specifications 323-07A. Iajdpfxew U Ngnj Ahyjl 2018 model. 6208 hours. Nextgen. 22800 kg. 122.0 kW. Additional hydraulics. Hp mount: G70. Central lubrication. Rotor tilt. Sanding bucket. Dental tray. 360 camera. Belt width: 60 cm. Machine width: 298 cm. Description Cat 323 w/rotor tilt, sanding bucket and tooth bucket for sale. The machine has gone on a gold deal previously. The seat and computer have been replaced. The machine is in daily operation so the number of hours will increase. Works as it should. Delivery is arranged. Hours: 6208 Own weight: 22800 Year controlled: no Width: 298 Kw: 122 CE: Yes Engine hours: 6208 Model: 323

Condition: used, machine/vehicle number: YS2P6X2000207xxxx, mileage: 319,027 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21477 Specifications: Iedpsxkt Imefx Ahyeal 2012 model 319,027 km (I'm going to give you a little bit) Automatic transmission 359 hp Euro 5 Spring: full air Remote control Laxo on the bar Hydraulic extension Space for 2 containers Rotator on lift Climate Light Radio Tool cabinet Ready for delivery     Description: We have a 2012 Scania P360 Liftdumper w/ rotator for sale. Everything works as it should and services have been taken regularly at the owner's own workshop. The car is in weekly operation so the mileage may increase slightly. There is cosmetic damage to the car. (see pictures) The car is ready for delivery. Km: 319027 HK: 359 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 13100 Model: P360 Liftdumper m/ rotator

Condition: used, Year of construction: 2020, operating hours: 9,262 h, CE mark: yes Serial number: 31xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20531 Specifications: - 2020 model - 10262 hours - Certified to: 09/25 - 284 kW - 53050 kg - Track width: 60 cm - Machine width: 349 cm - 2 cam track shoes - Full track guides - Hammerglass - Serviced by owner - Undercarriage - Cleaning bucket - ​​S90 attachment - Extra hydraulics - Central lubrication - Lights - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2020Volvo EC480 E excavator w/ cleaning bucket for sale. The machine is in weekly operation so the number of hours may increase. It is also certified. The owner has serviced it continuously and the machine is working as it should according to the owner. Iajdpfowphwijx Ahyel Ready for delivery Hours: 9262 Own weight: 53050 Total Weight: 53050 Year controlled: Yes Year controlled until: 09/25 Width: 349 Kw: 284 CE: Yes Model: EC480E

Condition: used, Year of construction: 2008, operating hours: 8,470 h, Serial number: n7da2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21240 Specifications: 2008 model 8,470 engine hours 136 kW Operating weight: 25,810 kg Track width: 60 cm Machine width: 319 cm Undercarriage: poor condition Minor leakage on bucket cylinder Digging bucket Iasdsw Ucmzjpfx Ahyol Hydraulic grading bucket (well used) Track control S70 quick coupler Extra hydraulic outlets Lights Air conditioning Radio Ready for delivery Description:We have a 2008 New Holland E265B excavator for sale, equipped with digging bucket and hydraulic grading bucket.There is minor leakage on the bucket cylinder and the undercarriage is in poor condition. Defects and wear are present, and repairs should be expected.All services have been carried out every 400 hours by the owner. The machine is ready for delivery. Hours: 8470 Own weight: 25810 Width: 319 Kw: 136 Model: E265B Gravemaskin m/ graveskuffe og hydraulisk pusseskuffe

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Isdpex Ncb Aofx Ahyjal Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Full side opening Delivery by appointment   Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Iajdpfxowphixj Ahysl Suspension on 3rd and 4th axle: air 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Precisely cut out panels in side...