Used Shaped Punch for sale (3,102)

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Hnsdpfowcxccox Abrsh Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 320 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 630 mm, total length: 590 mm, total height: 1,300 mm, Croissant Rolling Machine Erka WMA 30 Rolling band width: 320 mm Suitable for all stick-shaped products such as Kornspitz and pretzel sticks, Mobile croissant rolling machine Connection: 400V, 16A-CEE plug Used machine Options: Maintenance contract Hsdpfoyaf H Uox Abronh Feeding device Service package Delivery service Instruction & commissioning Visit our bakery machines exhibition!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 590 mm, total length: 680 mm, total height: 1,390 mm, WP 300 Croissant Rolling Machine Feed rollers with scraper suitable for all types of sticks such as Kornspitz and pretzel sticks, mobile croissant rolling machine Connection: 400V, 16A CEE plug Dimensions approx.: 590 x 680 x 1390 mm (W x L x H) Used machine Hedpfx Abjyaf Ewerjnh Options: Maintenance contract Feeding device Spare parts box Service package Delivery service Training & commissioning Many more bakery machines in stock!

Condition: excellent (used), rotating centre punch make Röhm MK 6 1 point 60 degrees 1 point 90 degrees Hedpjgviq Nsfx Abrsnh total length 340 mm weight 8,5 kg

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Hedpox U Eiaofx Abrjnh Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Year of construction: 1998, max. wheel diameter . mm gear width . mm max. module . Hedpfx Absucgwworonh min. module .

Condition: used, Year of construction: 2001, Control SIEMENS Hnjdpfeudc S Tex Abrsh table surface area 160 mm weight of the machine ca. 10 t

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Hnjdpfxovfxwtj Abrjh Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: reconditioned (used), > completely overhauled and newly painted > Passage width 900mm > roller table Hsdjfuaztopfx Abronh

Condition: refurbished (used), Year of construction: 2026, pressing force: 50 t, Custom-order machine High-speed punching press B500-950, completely overhauled. Table length: 950 mm, optionally also 1150 mm or 1250 mm. Hodpfx Abew U A Dyerenh Adjustable stroke: 16 to 51 mm. As an alternative to the Bruderer BBV 202/120 roller feed, a servo feed can be installed. Contact us for detailed quotations.

Condition: refurbished (used), Year of construction: 2026, pressing force: 25 t, Order machine High-speed punching press B250-740, completely overhauled Table length 740 mm, optionally also 850 mm, Adjustable stroke 13 to 38 mm, Hsdpfxjw U A Ewj Abrjnh As an alternative to the Bruderer BBV 190/85 roller feeder, a servo feeder can also be installed. Contact us for detailed offers.

Condition: used, Year of construction: 1995, Comm. no.: Lg 33021 Double column punching machine KAISER KSTU 2500 Year of manufacture 1995 Machine no. 131 720 Technical data pressing force max. 2.500 KN Stroke rate max. 20 to 120 min.-1 column passage left-right 1.500 mm table area 1.500 x 1.100 mm Clamping plate 1,500 x 1,100 x 150 mm Passage in clamping plate mm Milling in clamping plate mm Plunger area 1.500 x 900 mm Hnjdpfx Ajivpi Uobrsh Installation height with max. stroke at bottom approx. 550 mm Stroke adjustable 20 to 160 mm ram height adjustment 100 mm connected load approx. 70 KW electrical equipment 400 V / 50 Hz weight approx. 35.000 kg dimensions (L x W x H) approx. 4,000 x 3,100 x 4,120 mm Equipment and accessories electronic. Roller feed KAISER KWV 600 Z passage width max. 600 mm strip thickness 0.5 to 4.0 mm material cross section max. 1.800 qmm Roll diameter 120 mm Feed length max. 9,999.99 mm Intermediate ventilation hydraulic Off-center strip run ± 20 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Punching plate Crosland CVK 980 Size 78 x 100 cm Hjdpfxowif Hus Abronh Year 2004 in very good working condition available immediately

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Punching force: 220 kN For sheet thickness up to: 8 mm Weight approx.: 11 t Hsdpex Tr S Sefx Abrsnh

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total width: 710 mm, total length: 1,280 mm, total height: 1,175 mm, overall weight: 190 kg, working width: 330 mm, input voltage: 240 V, input frequency: 50 Hz, infeed height: 250 mm, infeed width: 330 mm, product width (max.): 300 mm, product width (min.): 138 mm, space requirement height: 1,175 mm, space requirement length: 1,280 mm, space requirement width: 710 mm, stack height: 250 mm, James Burn JBI DocuPunch Plus Automatic punching machine for calendar sheet punching. With the DocuPunch, you can quickly and easily punch small or large batches of calendar sheets or book pages. By using interchangeable tools, holes can be either round or square, with or without a thumb-cut. Extremely easy operation, just like a copier! Description: Hnjdeygxqgopfx Abrjh - Punching system for calendar sheet punching (tool not included) - Compact design, on castors, space-saving - Adjustable speed - Operation via touch screen - Fast job change in approx. 5 minutes - Automatic sheet feeding from high-pile feeder - Quick tool change in approx. 2 minutes - Foldable punching dies - Simple and intuitive format adjustment - Waste bin for punching waste - Sheet output tray Technical Data: Max. sheet size: 330 mm (binding edge) x 300 mm Min. sheet size: 138 mm (binding edge) x 138 mm Material weight: 80 - 250 g/m² Feed stack height: 250 mm Output stack height: 250 mm Speed: 50, 60, or 70 cycles per minute, up to 45,000 sheets (80 g/m²) per hour Punching depth: adjustable, 0.4 - 1.0 mm Electrical supply: 220 - 240V, 50Hz Dimensions: 1,280 x 710 x 1,175 mm Weight: 190 kg Tools included: 1x James Burn JBI DocuPunch Wire-O Tool 3:1 Square hole 4 mm 1x James Burn JBI DocuPunch Wire-O Tool 2:1 Round hole 6 mm Year of manufacture: 2023 Runs flawlessly, very good overall condition Counter reading approx. 700,000 Prices are net prices. Invoice with VAT will be issued.

Condition: used, Year of construction: 2004, functionality: fully functional, Bograma BSM 750/220/15 Servo punching line, year of manufacture 2004 Hjdpoygr I Ssfx Abrenh Bograma BSM 750/220/15 Servo, year of manufacture 2004 Bograma sheet feeder TA 15, year of manufacture 2004 Bograma shingled delivery SAB 750, year of manufacture 2004

Condition: good (used), Punching machine, pneumatic punching machine, punching device, hole punching machine -Insert tool Hjdeb A I Twepfx Abrenh -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm -Weight: 75 kg

Condition: good (used), Year of construction: 2008, max. workpiece diameter 300 mm ca. 6 mm hob turning speeds 90-900 U/min Size of table plate Ø 300 mm table turning speeds 135 U/min Torque max. 445 Nm voltage 400 V total connected load ca. 50 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 3,5x2x3,0 m Gleason-PFAUTER GP 300 CNC gear hobbing machine for gear cutting on shaft-shaped and wheel-shaped workpieces with all rollable profiles and shapes occurring regularly around the circumference of cylindrical workpieces. In the basic version for wet milling with cooling lubricants or as an option for dry milling. SIEMENS SINUMERIK 840 D motion control system with 5 axes and 1 spindle (basic configuration) as well as electronic gearbox (EG) and integrated safety functions. * 19" flat control panel OP 012 with - integrated PC system PCU 50 with Windows XP operating system Hsdpsx Ti A Iofx Abronh Smallest/largest distance between cutter and workpiece axis - 30/230 mm Largest axial slide travel - standard version 250 mm Max. cutter dimensions - diameter 140 mm + length 220 mm Swivel range of the milling head +/- 45° Maximum cutter travel 200 mm Cutter arbor taper HSK-B80 (Hollow shaft taper according to DIN 69063) Includes 32 mm milling mandrel

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Hnodpoyg D Nnefx Abrsh Very well maintained Punching force 45 t Incl. various punching dies

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 28 t, sheet thickness steel (max.): 6 mm, input current: 35 A, Machine in perfect working order! Hsdpfx Aborfww Noronh

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced Hedpfxsvf Ig Dj Abronh

Condition: used, Year of construction: 1998, max. wheel diameter 85 mm Hsdewhqx Tjpfx Abrenh gear width max. 125 mm max. module 3 Control ja total power requirement 30 kW weight of the machine ca. 8 t

Condition: used, Year of construction: 2005, weight of the machine ca. 7.800 kg Hnedpfxsudc S Hs Abroh dimensions of the machine ca. 3.380 x 3950 x 3015 m

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm Hodpow U U S Nsfx Abrsnh no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Year of construction: 1997, sheet width 1015 mm Hnjdpfx Abjuiz Iwsreh plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English)