Used Shredder for sale (961)

Condition: good (used), Komptech Terminator 3400 SE 160 kW full set with electrical cabinet Bjdpfxoyg E Hbo Aglslc FOR SALE FOR LOW PRICE

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW Bodpoyg E Ewefx Aglolc - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet - rotor length 1 900 mm

Condition: ready for operation (used), Year of construction: 2008, - Shredder EUREC S 20.00 D - year of manufacture 2008 - low hours - good working condition Bsdpfx Ageyg E Ekololc - with wireless remote control and spare parts

Condition: used, Price: On request Shredder Dreher S26 Type: S26/26 No.: K4727 Hopper opening: 250 mm x 400 mm Motor: 4kW 380Volt 8.3Ampere - Documentation available: No - CE certificate present: No - Serial number: K4727 - Main motor power [kW]: 4 - Number of shafts [pcs.]: 1 Bljdsyfguqopfx Aglec - Opening width [mm]: 250 - Opening length [mm]: 400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Bledpju Tha Isfx Agloc Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,600 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredding plant URRACO 75D. Folding discharge conveyor, overband magnet, remote control. Blsdpeydmgdefx Agloc

Condition: new, Year of construction: 2025, The Brugger PX10 wood chipper is powered by a tractor’s PTO and is capable of processing logs with a diameter of up to 10 cm. Its robust construction and high-quality materials ensure reliable performance. Featuring hydraulic drive, it offers an efficient solution for wood processing across various agricultural and forestry applications. - Manual feed - Diameter up to 10 cm - Weight: 165 kg - PTO speed: 540 rpm Blodpjw Dnwfofx Aglsc - Tractor power: 15-65 HP ---- Contact us for your customized offer! Price + VAT For companies with a VAT identification number, a net invoice will be issued.

Condition: new, Year of construction: 2024, power: 10.3 kW (14.00 HP), fuel type: gasoline, Brugger HX10 shredder - Powerful, compact and versatile! The Brugger HX10 shredder is the ideal solution for all gardening professionals and hobby gardeners who are looking for a powerful yet maneuverable shredder. With its powerful 14 hp petrol engine and robust design, the HX10 effortlessly shreds branches and trunks with a diameter of over 10 cm. Whether in private gardens or on larger sites - this shredder brings power to every corner! Thanks to its narrow design, the HX10 is perfect for use in confined areas. The device can be easily adjusted by hand and maneuvered with ease, allowing you to work efficiently even in difficult garden areas. With a width of just 80 cm, the HX10 can get through any garden gate. Your advantages at a glance: - Powerful: 14 hp petrol engine for powerful shredding - Effective: Processes branches and trunks up to a diameter of over 10 cm Blodpfx Ageumv E Heloc - Compact and maneuverable: Narrow design for easy maneuvering in small spaces - Easily adjustable: Flexibly adjustable for comfortable working - Perfect for horticulture: Ideal for use in private and professional gardens The Brugger HX10 - your all-purpose weapon for efficient garden maintenance! Technical data: Dimensions: 140 x 80 x 165cm (l x w x w) Weight: 185 kg Blades: 2, 30cm wide Max. Diameter: 10cm Processing/h: 4-6m3/h Feed hopper: 51 x 42 cm --- All prices plus VAT. Contact us for a customized offer!

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Bsdpfx Agoxx Tfzeljlc Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation Bljdpfxjyfw D No Agloc - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: used, Year of construction: 2016, operating hours: 816 h, 2016 | Dücker HM 160 Wood Chipper | Used Shredder | 816 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39536 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Bjdsydr A Ropfx Aglelc ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Bedpfxsd Hkqhs Aglelc Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: Bjdpod E R D Sefx Aglslc - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Blodpfedwktkex Aglsc Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: Bedpfx Agjx Af Rdslolc - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: used, Year of construction: 2013, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 5253, overall weight: 8,000 kg, rotor diameter: 430 mm, total length: 3,400 mm, total height: 2,900 mm, rotor length: 1,600 mm, power: 55 kW (74.78 HP), rotational speed (max.): 80 rpm, sieve perforation: 50 mm, Lindner Vega L 1600 Drive motor: 55 kW, 400 V/50 Hz Control cabinet: complete star/delta Bjdpfx Ajydy Dvsglslc Rotor speed: approx. 80 rpm at 50 Hz Rotor knives: 70 pcs. Rotor knife dimensions: 43x43x19.5 mm Rotor length: 1600 mm Rotor flying circle: approx. 430 mm Counter-knives: yes Hydraulic unit: complete Screen cassette: screens 50 mm Total weight approx. 8 t Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Hydr. self propelled drive (for moving on site) Bedpfx Ajt Egddoglelc Twin drive separate drives for scraper floor and infeed roller Radio remote control

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Bsdpfx Agjuv Htuololc Electric drive: 250 kW Including switch cabinet and hydraulic unit.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 22,000 kg, power: 375.1 kW (509.99 HP), year of last overhaul: 2024, Diesel engine: 510 HP Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor Overband magnet Central lubrication Blsdpfx Aerrg Ifegljc Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control We can also offer financing if required.

Condition: reconditioned (used), Year of construction: 2006, power: 320 kW (435.08 HP), Stationary shredder LINDNER JUPITER 3200 Electric drive: 2x 160 kW Blsdpfx Ajwg Ev Deglec Powerbelts new. Incl. hydraulic aggregate, electric control cabinet.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Bsdpfx Aow Rz Rqsglslc Radio remote control

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 564.86 kW (767.99 HP), VOLVO diesel engine: 768 HP Tilting hopper Lift-axle Discharge conveyor with overband magnet Bjdpfx Agjtpqcholelc Radio remote control

Condition: excellent (used), Year of construction: 2009, Diesel engine: 430 HP Rear discharge conveyor, overband magnet, radio remote control. Bledeh Ngukepfx Agloc We can also offer financing if required.

Condition: used, Year of construction: 2012, power: 264 kW (358.94 HP), Stationary shredder M&J 4000S. Electric drive: 2x 132 kW Bjdpfou Dkf Dsx Agljlc 400 V AC, 50 Hz Inkl. substructure, hydraulic unit, control cabinet.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Foldable discharge conveyor. Radio remote control. Bodpfeu Di Azsx Agljlc