Used Shredders for sale (916)

Condition: used, For sale: a resonator turbine inverter, removed from a Finn-Power L6A CO2 laser. Two units are available. The inverters are in good condition. Gedpsy Sz Utefx Akyeuc Manufacturer: KEB combivert Manufacturer’s code: 0308A757 / 57251, additional code 15.F4.CNE-A001 Revision: V 1.4 PRC laser Price per unit: 400 EUR. If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Gujdpfxjx Ilp Hs Akysc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,100 h, functionality: unexamined, overall weight: 2,200 kg, number of blades: 42, rotor diameter: 260 mm, WEIMA WL 6 – Single-shaft shredder for wood waste, year of manufacture 2007, only approx. 1,100 operating hours. For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from a running production facility and is in good overall condition, considering its age. Special feature: The operating hour meter shows only approx. 1,100 hours – with a year of manufacture of 2007, this corresponds to an average usage of only around 60 hours per year. Rotor, bearings, and drive train are therefore expected to show very little wear. The machine is equipped with a conveyor belt feeding unit that automatically feeds the material. The top deck is removable – operation is also possible by manual feeding. The separate control cabinet is fully included and professionally installed (Moeller/Eaton contactors, motor protection switch, safety relay, Siemens S7-200 basic PLC). The machine has not been put back into operation after being removed from the production facility. Inspection in Lennestadt (North Rhine-Westphalia) is possible at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 hours (meter reading) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 RPM Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Guedpey U Nu Tofx Akysc Particle size: 10–60 mm adjustable Feed opening: 800 x 1,250 mm Extraction nozzle: Ø 200 mm Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt feed (top deck removable) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relay More pictures on request.

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm Gedpjy R A Ncjfx Akyjuc - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Colour: Grey Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Gedpfx Ajwh Na Nokyeuc Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, total length: 4,100 mm, total height: 3,050 mm, total width: 1,800 mm, Colour: Grey Empty weight: 5.000 kg Price: On request - Year: 2009 - Documentation available: No - CE certificate present: No - Serial number: 1442 - Main motor power [kW]: 37 Guedsx Ig Svopfx Akysc - Rotation speed [rpm]: 1480 - Hydraulic unit power [kW]: 2.2 - Rotor width [mm]: 1000 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 1050 - Opening length [mm]: 1300 - Sieve perforation [mm]: 25 - Number of rotating knives [pcs.]: 26 - Transport dimensions: 4100mm x 1800mm x 3050mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, overall weight: 2,300 kg, power: 18.5 kW (25.15 HP), VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been completely overhauled and technically upgraded in 2025 and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to the start position. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. The PLC system also allows adjustment of key operating parameters depending on the material being shredded, including maximum working power, shutdown power threshold, and the forward movement speed of the hydraulic press. This makes it possible to optimize the machine for different materials and ensures efficient and safe operation. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Throughput: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm Guedpfx Akst Dh T Doyoc • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Condition: used, Drop feed chipper type Erjo 165 SN. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Gsdpfjzam Dnex Akyouc

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm Guedpfx Aey Rr Rcekyjc - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: refurbished (used), Year of construction: 2005, overall weight: 19,000 kg, Doppstadt DW 2560 Buffalo - Year of construction 2005 Godpfx Aksyxky Eeyeuc - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: good (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, The machine was used for reducing waste wood, with little usage. Exchange basket is available. Knives are new. Runs very reliably. Good quality wood chips. Loading included. Gedpfey Ulyxex Akyeuc

Condition: used, functionality: fully functional, Equipment: CE marking, Complete BARMAC 200 vertical shaft crusher consisting of a machine frame and discharge chute, electric motor, electrical control panel, and operator panel. GRAVIPAC 1000 vertical shaft crusher consisting of a complete frame, machine, motor, pulley, and belt. Guodpfx Aox Th Euokyec

Condition: used, Year of construction: 2020, operating hours: 602 h, Arjes IMPAKTOR 250 - 2 sets of shafts - INCL. STAR SHAFTS Year of construction 2020 Guedpfjr Epxlsx Akyec Hours 602 Original paddle shafts - Armored. Included and mounted, W-E-R-T original star shaft (only 15h - like new) Easy to repair in contrast to the original paddle shaft. Ideally suited for: - Wood - old wood - Rootstocks - tires - Light building rubble Tracked undercarriage and hook lift version Length (mm) 7,700 / 7,300 (transport) Width (mm) 2,300 / 2,300 (transport) Height (mm) 3,500 / 2,800 (transport) Total weight (kg) 14,000 DRIVE EU US ROW* Engine type (Volvo Penta) Exhaust emission standard EU Stage V Bonfiglioli transmission OUTPUT BELT Discharge height (mm) 3,450 Width (mm) 800 Including overbelt magnet and water spraying system SHREDDING UNIT Hopper volume (m3) 2.25

Condition: not inspected (used), Year of construction: 2011, operating hours: 7,219 h, overall weight: 22,000 kg, operation weight: 22,000 kg, Husmann HL2 1622/2 Twin Shaft Shredder/Crusher/Reducer Gusdpfxjy I Upie Akysc • Gearbox defect: No power transmission between the right shaft and the gearbox. • Manufacturer: Husmann • Model: HL2 1622 • Year of manufacture: 2011 • Operating hours: 7,219 h • Power: 354 kW / 481 HP • Engine: CAT C13 • Hopper dimensions: 2,500 x 6,400 mm • 1,600 x 2,260 mm, covered with cutter shafts • 16 to 64 blades • Blade width: 50 mm • Bolt-on cutter blades • Shaft diameter: 660 mm • Shaft length: 2,260 mm • Overall length: 10,200 mm • Width: 2,500 mm • Height: 2,650 mm • Feed height: 2,650 mm • Total weight: 22,000 kg • German machine • This offer is not binding and is subject to prior sale. - Subject to prior sale, - Errors and/or typos excepted. - Sale according to our terms and conditions.

Condition: new, Year of construction: 2026, Technical Specifications: Mechanism dimensions: 800 x 640 mm Machine drive: 2 x 7.5kW electric motor Transmission: Helical gear Number of shafts: 2 pcs. Knife diameter with Shaft: Knives 310 mm Number of Knives: 40 pcs. Knife thickness: 10 mm Control: SIEMENS PLC Weight: approx. 1800 kg Main features: - A solid and reliable solution, - Custom design tailored to the needs of an individual customer, - High resistance to heavy loads and intensive operation - Designed to shredding PP, PA6, PE plastics, pieces of soft wood, hard drives, aluminum, spiro pipes,cartoon pipes. - Uniquely designed knife shape Number and height of teeth depending on the material to be shredded. - Knives made of special materials dedicated to cold cutting and grinding - Knives made of Hardox 450 steel. Guodpfxsittpus Akysc - Advanced proprietary Siemens PLC control system that prevents machine blockage and significantly increases shredding efficiency - Low speed 35 rpm with high torque - Helical-bevel gear with appropriately selected power and speed - 12-month warranty. - Service in POLAND

Condition: new, Year of construction: 2026, Shredder ZEIGE300 is a strong and reliable equipment. We have calculated and designed everything so that the machine can withstand the loads that are required to shred plastic and similar materials. The ZEIGE300 Shredder can grind any shape plastic that fits between the blades. We have tested it with HDPE, PP,PET and PS. The shredder has no restrictions on thickness. If the piece of plastic is too thick, the blades will not shred because the machine is designed so that the plastic cannot jam the machine – automatic revers system. PP, HDPE, PS from 0.7mm to 12mm have been successfully tested. The films are too thin and slip between the blades. We have not tested the Shredder on materials such as rubber, tires and thermoset materials The shredder is also designed to be easy to clean and maintain. Gedpfxsg Rci Io Akyjuc Very fine shredding is only possible with a shredding of the same material twice. Application: ZEIGE twin-shaft mechanism machines are mainly used in the shredding process, plastic, cardboard, pine boards with low thickness cardboard dividers. Shredder for different types of plastics. Compact mechanism design based on precious plastics – project adjusted to our needs. Technical data: Dimensions of the mechanism: 300x250mm Inlet dimensions, upper part: 515x480mm Drive of the machine: 1x3KW (electric motor) Drive transmission: hardened zebra gear Number of drive shafts: 2 pcs. Number of knives: 26 pcs. Thickness of knives: 6 mm Machine dimensions: 1670x1410x600mm Capacity: 40 kg/h Construction: Solid frame construction with inlet for safety work. Painting: Powder coating + wet paint Control: SIEMENS Algorithm switching on the reverse rotation in case of overloading the machine. We can build any shredder with power up to 2 x 15 Kw. You can send RFQ we are Polish company full production process is done in our factory located in Tarnów. Please send us You material we can test it and design the machine according to your needs.

Condition: used, Catalogue No.: 7536 – German-made Gujdsy N Raaopfx Akyec – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Godpey N N Uvjfx Akysuc Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, overall weight: 47,000 kg, power: 522.2 kW (709.99 HP), fuel type: diesel, color: red, number of blades: 10, motor manufacturer: CAT, motor model: CAT C18, Rollers with 10/10 discs, each with 8 blades Crushing bar with comb Chain shoes Permanent overband magnet Water spray system Gujdpfx Aey Uh N Ajkyjc Radio remote control

Condition: good (used), URSCHEL CC | Rotary slicer / Grater for vegetables, cheese and fruit Guodpfszaglfex Akysc Manufacturer: URSCHEL LABORATORIES, INC. Model / Type: CC Serial number: 2107 Power supply: 230/400 V | 3 phases | 50 Hz Blade head not included The Urschel CC industrial rotary slicer is an absolute leader and industry standard in the field of high-performance dicing, grating and slicing of food products. The machine finds wide application in large fruit and vegetable processing plants, companies producing potato chips, modern cheese packaging lines (grating cheese for pizza, processed cheeses), and in delicatessen and ready-meal production facilities (concentrates, salads). The operating principle of the Urschel CC model is based on the use of centrifugal force. The product fed into the rotor is pressed against the inner walls of the stationary cutting head, which guarantees perfect consistency in slice thickness, minimal raw material loss (no crushing effect) and an excellent texture of the finished product. The machine’s design allows for continuous feeding without the risk of clogging the working chamber, which drastically increases the efficiency of the entire production line.

Condition: used, Year of construction: 2006, operating hours: 4,450 h, functionality: fully functional, overall weight: 19,000 kg, power: 257.42 kW (349.99 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C9, Field of application: waste wood and fresh wood, household and bulky waste, electronic scrap Shafts with 7/7 discs, 5 knives per disc Breaking bar with comb Robust hooklift frame Axle unit with drawbar Gedpfsy Akb Rsx Akyouc Permanent over-belt magnet Radio remote control

Condition: used, Year of construction: 1993, total length: 1,700 mm, total height: 2,880 mm, total width: 1,600 mm, Colour: Grey Empty weight: 2.000 kg - Year: 1993 - Documentation available: No - CE certificate present: No - Serial number: 70.504 - Main motor power [kW]: 37 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 - Opening width [mm]: 440 Gujdpfxoy H Ince Akyoc - Opening length [mm]: 1000 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 4 - Transport dimensions: 1700mm x 1600mm x 2880mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition Gusdpfx Akjy Nz Nfsyec – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: excellent (used), CATALOG NUMBER 6955 TECHNICAL DATA - Feed hopper inlet (L x W): 1070 x 710 mm Guedsy Nz Hkspfx Akysc - Discharge outlet for shredded wood: Ø 200 mm - Rotor working width: 700 mm - Main motor: 18.5 kW - Pump motor: 1.5 kW - Number of knives: 21 pcs - Knife size: 35 x 35 mm - Screen: 50 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1700 x 1300 x 1640 mm - Weight: 1780 kg FEATURES – German-made – Auto-reverse – Pressure drawer – Very good condition – Used shredder Net price: 62,900 PLN Net price: 14,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Not repainted – Very good condition Godpfx Akjy Nz Arsysuc – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)