Used Sinumerik 810 D for sale (46,990)

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Gsdpfxoutuyij Al Ujkc Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. Gkjdjy Sub Hopfx Al Usc All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. Gsdpfx Alez H Tn Aj Uokc - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: good (used), 1 used hardness tester Manufacturer: Mitutoyo Model: Wizard 810 208 D Testing methods: Rockwell Gkodpfexup Uwsx Al Usc Brinell

Condition: ready for operation (used), power: 11 kW (14.96 HP), planing width: 810 mm, number of blades: 4, For sale is a robust Panhans thickness planer, model DH 810, featuring a large planing width and a clear digital display for the planing depth. Technical data / Equipment: + Planing width: 810 mm Gedsz I T Daepfx Al Uekc + Motor power: 11 kW + 4-knife planing shaft + Digital display for the set planing depth + Two rollers in the thickness table to assist with workpiece transport + Robust, heavy-duty construction Inspection and test run possible by arrangement in Haldensleben. Invoice with VAT shown. Transport can be arranged for an additional charge.

Condition: ready for operation (used), Siemens SINUMERIK 810 TFT Monitor LCD84-0019b, serial number S7999, used, in good condition, fully functional, delivery as shown in photos. Gkedpfez Acr Eox Al Uoc

Year of construction: 2017, condition: ready for operation (used), overall weight: 380 kg, Turntable manufactured in 2017. This EXPERT EDX810/0250/8 is part of a system and has a machine weight of 380 kg. If you are looking to get a turntable, consider the EXPERT EDX810/0250/8 machine we have for sale. Contact us for further details. 4 units available Gedjz Ap Hvepfx Al Uskc Technical Data • Machine Type: Turntable • Indexing Angle: 8 × 45° • Index Time: 2.02 sec. • Transport Time: 1.79 sec. • Motor Voltage: 400 V • Motor Frequency: 50 Hz • Motor Power: 0.75 kW • Brake Voltage: 400 V • Braking Torque: 10 Nm • Operating Mode: SEW II.c • Dimension Sheet: A9681 • Noise Emission: < 75 dB(A) • Turntable / Drum Drive: Turntable configuration • Rotation Direction: Forward / Backward • Number of Speeds: 1 • Activation: Direct

Condition: excellent (used), Year of construction: 2019, Duplo DuSense DDC-810 coating and embellishment machine year 2019 - first installation 2021 very good condition - sparingly used counter reading only 25,000 sheets covered by a maintenance contract until 2026 - latest software Gkedpozy Na Rjfx Al Usc corona unit

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Gsdpezimgaofx Al Uskc 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Gkedpfx Aljwz Rifs Usc Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: ready for operation (used), Siemens control panel Sinumerik 8 MS421-D, used, normal signs of use, 100% functional, scope of delivery as per photos. Gkedpfx Alezzhmlj Uoc

Condition: good (used), CNC control, operator panel, LCD SIEMENS SINUMERIK 810 Gksdjdpg T Rspfx Al Ujc -Manufacturer: Siemens -Type: Sinumerik 810 M -Dimensions: 420/280/H350 mm -Weight: 9.7 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Components are in like-new condition. Robot: KUKA KR 20 R1810-2 with: - EtherCAT communication to an external Beckhoff PLC Godpfx Aljvwz Huo Uekc - Diagnostics Safety 3.2 - SafeOperation 3.6 - GripperSpot Tech 5.0

Condition: used, PLC, control panel, operator panel, control machine -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg Gsdpfjdpmmysx Al Ujkc

Condition: ready for operation (used), Siemens 6FX1136-2BA01 SINUMERIK 810 MPC interface module, used, normal signs of use, 100% functional, scope of delivery as per photos Gjdpfx Alsxagp Ne Ujkc

Condition: ready for operation (used), Siemens 6FX1114-5AA00 Sinumerik 8 interface for external PLC S5, version D, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpfx Aei Ed Nmol Uekc

Condition: ready for operation (used), Siemens 6FC5110-0BA01-1AA0 Sinumerik NC CPU card 580 231 9101.01 E, version D / 570 521 9101.00 E, version A, used, 100% functional. Gedpfx Alsi Edx So Uokc

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,400 h, functionality: fully functional, machine/vehicle number: A1003212.01, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 520 mm, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X: 1,050 mm Travel Y: 710 mm Travel Z: 520 mm Gjdsxywa Ejpfx Al Ujkc Tool holder: SK 40 Spindle speed: max. 8,000 rpm Spindle power: 12 kW Tool magazine: 30 stations MACHINE DETAILS Control: Siemens 810D Weight: approx. 5,600 kg Operating hours Spindle hours: 14,400 h Power-on time: 60,521 h EQUIPMENT Fully enclosed working area Work area lighting Central oil mist extraction Hinged belt chip conveyor Internal coolant supply 20 bar Note: The last day for pick-up in 2025 is December 22, 2025. The earliest pick-up date in 2026 is January 12, 2026!

Condition: good (used), Year of construction: 2007, operating hours: 1,672 h, lifting height: 8,000 mm, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Godpfx Asz Iixmsl Uskc Weights Empty weight: 3.455 kg Functional Lifting capacity: 567 kg Working height: 1.000 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 3,28m / 1,73 m / 2,32 m Surface type: Rough terrain Additional information Please contact Tobias Mayr for more information

Condition: used, Year of construction: 2017, Rotary table, indexing table Manufacturer: Expert Tünkers Type: EDX810/0250/8 Year of manufacture: 2017 Gkodpfxoyl Swwo Al Usc 8-station table (45° increments) 51026

Condition: used, SIEMENS SINUMERIK HANDWHEEL HT6 HANDHELD Condition: Used (working), incl. 3-day functional guarantee after receipt of Gsdpfx Ajyl Aaiol Uokc the goods. receipt of the goods.

Year of construction: 2017, operating hours: 6,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information LIEBHERR HS 8100 Year of man.: 2017 Gjdpfx Aleh Tyz Uj Uskc Current hours: 6430 Boom: 2x6m 1x3m More details on require!

Condition: used, Year of construction: 2013, functionality: fully functional, load capacity: 1,000 kg, total height: 850 mm, total length: 2,000 mm, total width: 1,100 mm, rotary table diameter: 900 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 1,000 kg, disc diameter: 900 mm, product height (max.): 1,350 mm, faceplate diameter: 900 mm, workpiece weight (max.): 1,000 kg, plate diameter: 900 mm, Equipment: foot remote control, Max load: 1000 kg Table size: Ø900 mm Max. height with vertical table: 1350 mm to middle of table Rotation speed: 0.1 - 1.2 rpm Featured with: Wired remote control Gkjdoz H Npijpfx Al Usc Country of origin: The Netherlands Motor power: 0,75 kW Machine (L×W×H): 200 x 110 x 85 cm Machine weight: 1100 kg

Condition: used, axle configuration: > 3 axles, first registration: 12/2005, total length: 12,590 mm, total width: 2,500 mm, suspension: air, tire size: 385/55 R 22.5, wheelbase: 9,860 mm, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = Gkodpfxez R Dite Al Usc - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 385/55 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 45%; Tire tread depth right: 45% Rear axle 2: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 4: Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,500 kg Payload: 45,500 kg GVW: 53,000 kg Condition Damage: none Identification License plate: OJ-17-DH

Condition: new, This Siemens Sinumerik SSD 80GB-SATA for PCU50.5 6FC5247-0AF08-6AA0 is for sale. The item is brand new, the original box was only opened for inspection and for the pictures. The SSD itself is still in its original packaging. Gsdpfx Aorr Syiol Uskc Shipped as seen. No signs of use. If you have any questions or are interested, please contact us. Shipping on request is no problem.