Used Tapping Center for sale (13,610)

Condition: new, Year of construction: 2024, Heavy duty transport trailer Payload 30000 Kg on 60 % of the loading area Kjdpfxsiwlw Rs Ab Tedh dimension 6000 x 2200 x ca.850 mm tires 559 x 300 drums Steering front axle turntable trailing axle rigid Transport floor 40 mm spruce recessed Screwed Painted in RAL 1007 Drawbar with towing eye 40 mm and drop safety device as well as height adjustment Double-acting wheel chock Welded trestles on each long side 6 pieces for load securing

Condition: new, Year of construction: 2025, Heavy-duty transport trailer for internal transportation Dimensions 4000 x 2000 x 510 mm All-wheel steering No Making Vulkollan tires 350x110x305 Kdodpfx Asl D Ng Njb Tjh Wooden transport floor 40 mm recessed Bolted Painted in RAL 5010 or RAL 2000 Drawbar with drawbar eye 40 mm and with safety catch and height adjustment. 4 lifting brackets per long side see load securing Optionally with second drawbar head at the rear so that the drawbar can be moved from the front to the rear

Condition: new, functionality: fully functional, machine/vehicle number: 0640, empty load weight: 2,200 kg, maximum load weight: 20,000 kg, overall weight: 22,200 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, loading space length: 5,000 mm, loading space width: 2,200 mm, tire size: 23x10-12 SE, color: orange, Year of construction: 2025, operation weight: 22,200 kg, TPW 206 AL - AS SE payload 16000 kg on the loading area at 6 km/h. Dimensions: 5000 mm long, 2200 mm wide and 680 mm high. Transport floor made of spruce wood 40 mm tongue and groove Super elastic tires with profile 23x10-12 with steel rims, conical bearings on both sides, sealed with Nilos ring Kdsdpfx Aorcf H Ueb Tsh Drawbar with fall protection and height adjustment, towing eye 40 mm. Steering: all-wheel steering knuckle. Safety: weld-on supports, five per long side (see load securing and double-acting wheel chock mounted on the frame) Paint: yellow orange RAL 2000

Condition: new, empty load weight: 8,000 kg, maximum load weight: 80,000 kg, overall weight: 88,000 kg, axle configuration: 4x2, first registration: 11/2024, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,400 mm, loading space height: 1,100 mm, suspension: hydraulics, color: light blue, Year of construction: 2025, operation weight: 88,000 kg, Heavy-duty industrial transport trailer with hydraulic lift eight axles that hydraulically raise and lower the trailer via a control valve all-wheel steering can be coupled on both sides, at front and rear transport floor made of 50 mm Douglas fir or without floor according to customer requirements Kjdeva E Tkopfx Ab Tsdh optional with hand brake or air brake system optional lighting system on both sides further information available upon request.

Condition: used, Year of construction: 1991, CNC Machining Center weinig UNICONTROL 10 Location Gorzów Wlkp. Conditions of delivery Kdedpedm Umljfx Ab Toh OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Longitudinal saw: 2800 rpm min., 3 kW, power take-off and slot spindle: 5 x 100 mm, 11 kW, 2.800 rpm. min., 1 spindle profiling: 6000 rpm. min., 11 kW, 2. Spindle profiling: 6000 rpm. min, 11 kW. "Angle windows, machining center WEINIG UNICONTROL 10 Number of spindle spindles: 1 Number of spindles molding: 2 Length of the spindle spindle mm: 300 Xrwk8iolx Length of profiled spindle mm: 295 Separate shaft grooves: yes Continuous stroke mm: 100 Spindle diameter mm: 50 Cutting tool cutting wheel mm: 232 Cutting wheel for perforation mm tool: 360 Length of material max mm: 2,600 Equipped for profiling: yes Automatic kontherholz: yes Glaucoma: Yes Workpiece rotation: Roller transport Main engine power kW: 11 Max feed rate m / min: 8 Control: Spindle ON / OFF only Working condition: dismantled / stored "

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm Kodpsxc I Dgsfx Ab Tsdh VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Kodjyh Uxyopfx Ab Tedh Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 026694, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530i, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,200 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK40 Speed: 50 – 12,000 rpm Number of tools in magazine: 30 pcs Table clamping surface: 3,900 x 750 mm Rapid traverse x/y/z: 12/12/12 m/min MACHINE DETAILS Control: Heidenhain iTNC 530i Total power requirement: 29 kW Dimensions & weight Space required: approx. 7,200 x 3,500 x 3,100 mm Machine weight: approx. 15,000 kg EQUIPMENT Chip conveyor 30-position tool changer Ksdpeyg D Evsfx Ab Tjdh High-pressure belt filter system Through-spindle coolant (IKZ) 15 bar SK40 tool holders Operating manual

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 6,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS X-axis travel: 6,450 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Machining length: 6,500 mm Number of tools: 8 pcs. Tool holder: BT30 Tool change time: 1.2 s Maximum tool diameter: 80 mm Spindle speed: 6,000 rpm Feed rate X: 34 m/min Feed rate Y+Z: 18 m/min Kedpfx Aboyg D A Ij Tsdh MACHINE DETAILS Total power requirement: 8.5 kW Dimensions & Weight Dimensions: 9,800 x 3,000 x 2,400/3,300 mm Weight: 5,400 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 220 294-0025, travel distance X-axis: 1,650 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, controller model: HEIDENHAIN TNC 426 PB, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 1,650 mm Y-axis travel: 810 mm Z-axis travel: 810 mm Spindle taper: ISO 40 Spindle speeds: 30 - 6,000 rpm Spindle motor: 17 / 20.5 kW Number of tools: 2 x 16 Table dimensions: 1,800 x 780 mm Number of T-slots: 5 Rapid traverse x/y/z: 20 m/min MACHINE DETAILS Control: HEIDENHAIN TNC 426 PB Dimensions & Weight Space required: approx. 5,585 x 2,440 x 2,360 mm Machine weight: approx. 11,400 kg EQUIPMENT 2x tool magazine with 16 positions each Chip conveyor Kdsdpfxeyg Dmmj Ab Tjh Cooling system Operating manual

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: M281364F3ND, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D inkl. Shopmill, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 24 pcs Tool holder: BT 40 MACHINE DETAILS Control: Siemens 828D incl. Shopmill Machine weight: approx. 6.5 t EQUIPMENT Hinged belt chip conveyor Internal coolant supply up to 30 bar Kodpfx Absygxkmo Tjdh

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm Kdsdsyic Tujpfx Ab Tsh - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 460045, spindle speed (max.): 5,000 rpm, overall weight: 7,500 kg, controller model: SIEMENS SINUMERIK 840D, Equipment: chip conveyor, TECHNICAL DETAILS Turret Number of spindles: 2 Kedsyhn Nzopfx Ab Tedh Number of turrets: 3 Number of positions turret 1: 10 Number of positions turret 2: 10 Tool holder: VDI 25 Lower turret head Number of positions: 10 Rotational speed: 6,000 rpm Power of driven tools: 8 kW Main spindle C-axis (resolution): 0.001° Max. spindle speed: 5,000 rpm Spindle power: 27 kW MACHINE DETAILS Control: SIEMENS SINUMERIK 840D Connection: 50 Hz 3x 400 V Total power requirement: 43 kW Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,100 x 2,100 mm Machine weight: 7,500 kg EQUIPMENT Chip conveyor Foot pedal

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Tool magazine capacity: 48 Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Required floor space: approx. 2 m² Kjdpsyhnzkefx Ab Tedh EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010407, travel distance X-axis: 320 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 320 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 40,000 rpm, TECHNICAL DETAILS Travel distance X-axis: 320 mm Travel distance Y-axis: 320 mm Travel distance Z-axis: 320 mm Number of axes (simultaneous): 5 Kdsdpfx Aoyhnygeb Toh Max. spindle speed: 40,000 rpm Max. workpiece length: 150 mm Max. workpiece width: 150 mm Max. workpiece height: 150 mm Max. workpiece weight on table: 20 kg A-axis: 360° B-axis swivel range: +/- 115° Number of tools in tool changer: 60 Tool holder: ISO V 30 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Connection: 50 Hz 3x 400 Volt Spindle motor: 11 kW Total power consumption: 35 kW Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,400 x 2,900 mm Machine weight: approx. 6,000 kg EQUIPMENT Set of tool holders Coolant unit Chip conveyor Lighting Coolant/mist extraction Switch cabinet air conditioning Status indicator lamp

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Kdedpjyhnxvjfx Ab Teh Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,564 h, functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Number of Axes: 4 Distance between vertical spindle and table: 115 mm Max. spindle speed: 24,000 rpm Feed rate: 1,500 mm/min Rapid traverse: 22 m/min Table length: 1,150 mm Kodpfx Abeyhnxcs Tedh Table width: 700 mm Turret stations: 60 Tool changer type: TC 30 Number of tools: 30 Tool diameter: 77 mm Diameter with adjacent empty stations: 115 mm Max. tool length: 305 mm Tool holder: HSK A63 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Connection: 50 Hz 3x 400 V Total power requirement: 40 kW Dimensions & Weight Dimensions (L x W x H): 5,220 x 3,100 x 2,840 mm Machine weight: approx. 10,500 kg Operating Hours Power-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Rotary table, 4th axis Set of tool holders, 45 pieces Tool cabinet LISTA

Condition: ready for operation (used), Year of construction: 2004, operating hours: 7,266 h, functionality: fully functional, machine/vehicle number: 10932-16, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, controller model: Roeders RMS6, spindle speed (max.): 42,000 rpm, The machine spindle was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 300 mm Number of simultaneous axes: 5 Max. spindle speed: 42,000 rpm Number of tool pockets: 82 Tool holder: HSK E40 Kjdpoyhnu Refx Ab Tsdh Rotary table diameter: 405 mm Max. workpiece weight: 300 kg Rapid traverse: 60 m/min MACHINE DETAILS CNC control: Roeders RMS6 Power connection: 50 Hz 3x 400 Volt Total power requirement: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 3,000 x 2,700 mm Machine weight: approx. 8,500 kg Spindle running time: 7,266 h EQUIPMENT Coolant system Water chiller Workpiece probe Laser tool control system Chip conveyor Workpiece magazine Setup stations (number): 31 Electronic handwheel Lighting

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Ksdpoyhnudofx Ab Todh X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,052 h, functionality: fully functional, machine/vehicle number: 11680001673, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2017! Machine equipped with KUKA loading robot! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of axes: 4 Maximum workpiece weight on table: 500 kg Maximum workpiece height: 850 mm Maximum workpiece diameter: 630 mm Table rotation speed: 40 rpm Table clamping torque: 1,580 / 2,300 Nm Maximum torque: 1,550 Nm Pallet changer dimensions (L x W): 400 x 400 mm Maximum pallet changer workpiece weight: 500 kg Number of tools in the tool changer: 120 Maximum tool diameter: 80 mm Tool diameter with free adjacent slots: 160 mm Maximum tool length: 400 mm Maximum tool weight: 12 kg Tool holder: HSK 63 DIN 69893 Form A Spindle diameter: 225 mm Spindle speed: 0 – 12,000 rpm Feed speed: 0 – 60,000 mm/min Rapid traverse: 60 m/min Maximum feed force: 10 N MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Spindle drive power: 20 kW Connection: 50 Hz 3x 400 V Total power requirement: 58 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,700 x 2,700 mm Machine weight: approx. 9,700 kg Operating Hours Power-on time: 75,886 hours Operating time: 27,052 hours EQUIPMENT Loading robot KUKA High-pressure coolant system Coolant through spindle (IKZ) 40 bar Spindle taper air purge Probe Chip conveyor Pallet storage rack Setup stations (number): 60 (3x20) Kdodpfx Aoyhnpzsb Tsh Lighting Rinse gun Rotating viewing window Electrical cabinet air conditioner Foot pedal Status indicator lamp

Condition: ready for operation (used), Year of construction: 2000, operating hours: 19,467 h, functionality: fully functional, machine/vehicle number: 1100 0000323, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, controller model: HEIDENHAIN 430, spindle speed (max.): 12,000 rpm, The spindle of the machine was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 550 mm Number of axes: 5 Table length: 630 mm Table width: 500 mm Centering bore diameter: 50 mm Maximum workpiece weight on table: 600 kg Number of pallets: 2 Pallet dimensions: 500 x 500 mm Maximum load capacity: 600 kg Tool magazine - number of tool stations: 60 Maximum tool diameter: 100 mm Kdodpfx Abeyhnm Ts Tsh Diameter with adjacent spaces free: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Tool holder: SK 40 DIN 69871 Spindle speed (stepless): 20 – 12,000 rpm Feed rate: 1 – 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN 430 Connection: 50 Hz 3x 400 V DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,902 x 2,687 x 2,484 mm Machine weight: approx. 9,500 kg Operating hours: 19,467 h EQUIPMENT Cooling unit Coolant through spindle (IKZ) 17 bar Pallet changer Lighting Rotating viewing window

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 83156, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: DECKEL GRUNDIG MILL PLUS, spindle speed (max.): 6,300 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Table length: 1,100 mm Table width: 650 mm Milling head indexing (B): 90° Kedpjyhnkxefx Ab Todh Number of tools: 25 Tool diameter: 80 mm Diameter with adjacent free positions: 160 mm Maximum tool length: 315 mm Tool holder: ISO 40 Maximum spindle speed: 6,300 rpm Feed rate: 1–15,000 mm/min Rapid traverse: 15 m/min Spindle motor: 16.2 kW MACHINE DETAILS Control: DECKEL GRUNDIG MILL PLUS Total power requirement: 29 kW Dimensions & Weight Dimensions (L x W x H): 3,100 x 2,300 x 2,500 mm Machine weight: approx. 5,500 kg EQUIPMENT Coolant system Lighting

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Kedpoyhnfcofx Ab Tjdh Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 20, controller model: GE FANUC 15-MB / 4 axis, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Number of pallets: 7 Pallet size: 320 x 320 mm Number of tools: 96 Tool holder: ISO 40 Kodoyhnc Uepfx Ab Todh Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: GE FANUC 15-MB / 4 axis Connection: 50 Hz 3x 380 V EQUIPMENT Coolant system Through-spindle coolant (IKZ) Tool breakage monitoring Chip conveyor Spindle cooling

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 41, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm B-axis: Available Number of pallets: 4 Pallet dimensions: 400 x 400 mm Maximum workpiece weight: 300 kg Number of tools: 96 Maximum tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Maximum tool length: 300 mm Maximum tool weight: 12 kg Tool change time: 2.5 s Average chip-to-chip time: 6 s Tool holder: ISO 40 DIN 69871 Kjdpfx Abeyhncho Todh Distance spindle to table: 100 - 600 mm Distance vertical spindle to table: 20 - 420 mm Maximum spindle speed: 12,000 rpm Feed rate: 1 – 12,000 mm/min Rapid traverse: 20 m/min MACHINE DETAILS Control: GE FANUC Series 16-T Compressed air connection: 6 bar Connection frequency: 50 Hz Connection voltage: 3x 400 V Spindle power: 5.5 / 7.5 kW Total power consumption: 60 kVA Noise level: 75 dB (A) Dimensions & Weight Dimensions (L x W x H): 4,330 x 3,200 x 2,520 mm Machine weight: approx. 6,000 kg EQUIPMENT Coolant system 500 l High-pressure coolant system 65 bar Paper filter system 3D probe RENISHAW Chip conveyor Coolant / mist extraction Spindle cooling