Used Temperature Control Machine for sale (90,288)

Condition: good (used), functionality: fully functional, Removed from an operational machine. 4 pieces, including cables, housed in a casing. Fgjdey Txfrepfx Apwsf

Year of construction: 1996, condition: used, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water   Fodpfx Aox R A A Nopwegf

Year of construction: 2019, condition: like new (used), functionality: fully functional, The equipment comes from toolmaking operations and has therefore seen very little use. The ENGEL machine has logged only 6,520 operating hours. The temperature control units were also used in this context and have a maximum of approximately 7,500 operating hours each. Fjdsxk Txxspfx Apwsgf Price: €3,450 per unit. There are 2 units still available. When purchasing both units, you receive the version with the large pump – offering maximum power for cooling, heating, and throughput – for only €6,500.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device Fgjdpog Ewwrofx Apwsf -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 5 Wittmann temperature control units are available for sale; the price is for 1 unit. Medium: Water Operating temperature: max. 90°C Heating capacity: 9 kW Fgjdpfx Apsy In Dyswof Cooling capacity: 25 kW

Year of construction: 2015, condition: excellent (used), The device is for sale: Fgodpfx Apencdwyjwsf They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature management. It is equipped with a mold-proximal valve switching unit (piston accumulator) to supply the piston inserts with water at temperatures of up to 200°C. NEW PRICE of the system: €67,000 plus the water hoses. The system will be inspected by Technotrans (GWK) prior to sale. More technical details about the “vario” temperature control unit available on request... The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW Fgsdpfsyxgnfex Apwef - Cooling: indirect - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature control of mold inserts) - 1 mold-proximal valve switching unit - 1 piston accumulator - 1 electronic control and regulation unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package, optional for an extra charge ...and more, see pictures.

Condition: used, CNC control unit for the operator panel / machine operator terminal CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg Fjdpolb I D Tjfx Apwjgf From a GILDEMEISTER CNC lathe. From stock, function not tested, ideal as a source of spare parts.

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Fgjdpfog Rhx Uox Apwof Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Year of construction: 2000, condition: good (used), Number: 0107058 Cooling capacity: 1,100 W at +6° C Cooling capacity: 1,270 kcal/h at +6° C Maximum temperature: 44 °C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Fodpfx Ashri Ahopwjgf Weight: 80 kg

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Fedpfxey I S Rws Apwsgf

Condition: like new (used), SINUMERIK machine control panel MCP 483 Fgjdpfxernkh Se Apwsf MPI/PROFIBUS-DP, width 19" Membrane keys 22mm EMERGENCY STOP is not included in the scope of delivery Was stored as a spare part

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Fgsdpfx Apsxhfi Rjwef Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Fgedpsyrncisfx Apwjf Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Year of construction: 2015, condition: reconditioned (used), Original price in 2015: €15,200 GWK cooling tower Documented complete overhaul by GWK DGUV certificate available Fedpfsdxlntex Apwegf

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. +F00 SN 158.719A Fgodpfx Aet Dyl Sopwef

Condition: good (used), Version with key switch Area of application: Lisec machines Width: 425 mm Height: 160 mm Depth: 50 mm Weight: 1078 g Fjdpfx Apeyr Inlswsgf Condition: Good, second-hand

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Fgedpeyl It Iefx Apwjf Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Fgedpfx Asyl Ib Eopwjf Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Condition New system Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems LEP13.2 KK6771 Package 11 Fjdpfjyl I S Djx Apwsgf System type: Temperature Control Unit – LEP13.2 AS Storage Project: Ammonium Sulfate Supply and Disposal Unit: KK6771 Year of manufacture: 2020 Serial number: 1003622 Equipment number: 20022749 LEP13.2 – AS Storage Temperature Control Unit TECHNICAL DATA Product: LEP13.2 – AS Storage Temperature Control Unit Medium: Ammonium sulfate Design: Pharmaceutical / GMP Product-contact materials: 1.4435 / 1.4301 stainless steel Dimensions (L x W x H): approx. 1900 x 1545 x 1580 mm Control air supply: 6 bar (AIP) Tested pressure range: up to approx. 3–4 bar (Leak test documented) MAIN COMPONENTS 2x centrifugal pumps Horizontal shell-and-tube heat exchanger Electric flow heater Expansion vessel Pressure and temperature measurement points Pneumatic control valves Manual ball valves (GEMÜ) Stainless steel control cabinet / terminal box Fully insulated piping APPLICATION The temperature control unit is used for precise temperature regulation in the ammonium sulfate storage system of a pharmaceutical production facility. Suitable for: - Pharmaceutical production environments - GMP-regulated systems - Media temperature control systems - Turn-over package integration DESIGN / CONSTRUCTION - Complete, pre-assembled skid unit - Stainless steel frame construction - Compact design with unobstructed maintenance access - Fully piped and insulated - Clear labeling of all measuring points and fittings - Pharmaceutical-grade execution as per CSL Behring customer specification - P&ID checked - Layout checked - Multiple documented leak tests - Calibrated measuring devices with certificates The system is fully assembled and prepared for seamless integration into existing pharmaceutical installations. CONDITION - As-new / Project system - Year of manufacture: 2020 - FAT completed - Pressure test passed - Complete documentation available COMPREHENSIVE DOCUMENTATION Includes, among others: - Factory certificates according to EN 10204 - Material lists - EU declarations - Inspection reports - Documentation of installed equipment - I&C documentation - As-built isometrics - User manual - Calibration certificates SPECIAL FEATURES - Project-specific pharmaceutical design - GMP-compliant manufacturing - Complete skid-mounted construction - Compact footprint (approx. 1.9 x 1.5 m) - Maintenance-friendly layout - High-quality piping insulation - Ideal for technical areas close to cleanrooms

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Fedpoyl Iwtsfx Apwogf Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Fgedpfxeyl Izxs Apwsf Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Fgsdpfxex Eg T Eo Apwsf

Condition: new, functionality: fully functional, Year of construction: 2024, The temperature control unit from the company is available and has not been put into operation. Fjdpfx Asw Rb Hfspwsgf Medium: Water Heating capacity: 27 kW Cooling capacity: 175 kW VA: Mould drain (vacuum) FM: Flow monitoring MKVI: Touch screen

Year of construction: 2018, condition: like new (used), The temperature control unit from technotrans is for sale and comes with a variety of extras. Warranty: 6 months with an operating time of 22 hours. Medium: Water with indirect cooling (heat exchanger) Heating capacity: 9 kW Cooling capacity: 42 kW Fjdpjyucb Esfx Apwogf Operating temperature: max 95°C Flow rate: 60 l/min Max pressure: 6 bar RJ45 port for remote access Interface: RS 485, 20mA CL Touchscreen g and much more.