Used Thermoforming for sale (164)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1545012, total length: 4,500 mm, Sealpack RE15 Stainless steel thermoforming machine Rigid and flexible film Film width 320 mm Fpsdpfx Ahsu Dipzj Usp peel-off 200 mm Bottom film holder in stainless steel Pneumatic lifting system forming station (heavy duty) Heating and forming via standard lid heating Heating and forming with compressed air Safety covers in stainless steel Free insertion distance of approx. 650 mm Built-in vacuum pump 100 ccm (1 piece) Foil transport chain 1/2" type K Top and bottom chain guide Sealing station with pneumatic stroke Designed for vacuum and MAP formats : 1.1 Is 2 x available with different widths 4.1 It is also possible to design additional formats ! Hard foil punch and soft foil cutter Edge strip rewinder Seal pack RE15 Stainless steel deep drawing machine Hard and soft film Film width 320 mm Deduction 200 mm Bottom film holder in stainless steel Lifting system forming station pneumatic (heavy duty) Heating and shaping via standard lid heating Heating and shaping with compressed air Stainless steel safety covers Free insertion distance of approx. 650 mm Built-in vacuum pump 100 cc (1 piece) Film transport chain 1/2" type K Chain guide top and bottom Sealing station with pneumatic lift Designed for vacuum and MAP Formats: 1.1 There are 2 x available with different widths 4.1 There is also the possibility of designing additional formats! Hard foil punch and soft foil cutter Edge strip winder

Condition: excellent (used), Year of construction: 2016, Blockmold body, tightly welded, annealed, machined, and pressure- tested, executed according to European Standards and P.E.D. - 97/23/EC heat-resistant steel for steam pressure boilers Maintenance platform with ascent aid and fall protection. Block dimensions: • Height: 4,100 mm • Depth (usable depth): 1,300 mm • Width: 1,040 mm • Block gross volume: 5.5 m³ Cycle times: • 12-16 g/l density - 20-22 blocks/hour • 17-19 g/l density - 18-20 blocks/hour • 20-23 g/l density - 16-18 blocks/hour • 24-28 g/l density - 14-15 blocks/hour • 29-35 g/l density - 12-14 blocks/hour Filling system: • Filling silo volume - 1 x 10 m³ • High-pressure suction blower - 11 kW • Number of filling pistols - 2 pcs. • Filling diameter - 300 mm • Drive - hydraulic Mechanics: • Hydraulic system - 15 kW • Demolding - hydraulic Fedpfxspwbmbs Ah Uepp • Door movement - hydraulic Electrical equipment: • Servo inverters: Mitsubishi • Frequency inverters: Mitsubishi • PLC: Siemens Simatic • HMI panels: Siemens Simatic • PC: Axiomtek

Year of construction: 2025, condition: new, Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! THE ORIGINAL MADE IN AUSTRIA! DUOFORMER - Heating – Forming- Pressing! The HEATING UNIT for all thermoplastic materials up to 230°C and The VACUUM PRESS for daily use! • No tricky placing of pressing layers • No sliding of the former • effortless closing and opening • pressing of M-shapes • operating from all 4 sides DUOFORMER S VERTICAL- Producing without compromises! Now on sale! Vertical opening: work piece height up to 850 mm Clamshell opening: See other sales offer on this platform! Pressing surface LxW: 2880x1280mm Heating surface LxW: 2600x1250mm Overall dimensions LxWxH: 3400x1750x1500mm • Heating drawer +230°C – 16kW • 40 m³/h high performance vacuum pump (BECKER) • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal Equipment: Vacuum table with silicone membrane and MEMBRANE FAST-CHANGE SYSTEM •Fully welded, sturdy and robust steel construction •pressure up to 9 t/m² (-900 mbar rel.) •analogue vacuum pressure gauge •mechanical vacuum pressure regulator •transparent Silicone membrane up to 230°C, 780% elongation, 40 Shore-A •robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm •extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) •with intecrated forklift pockets •incl. swivel castors Heating drawer with CAS-heating system (Controlled Air Stream) •material thickness: 0 - 70 mm •heating power: max temperature +230°C •2 circulation hot air fans •pull-out working surface with grating, grid 30 x 30 mm •easy removable heating drawer Control unit with 4“ SIEMENS touch panel •hinged control cabinet on the right side •variable temperature control up to + 230 °C •temperature control with timer and alarm •complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 17.5 kW Duoformer production capabilities: ● Pre-heating and forming of solid surface materials such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc. ● Pre-heating and forming of all other thermoformable materials such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc. ● Vakuumpress for bonding, coating, edge banding, flat pressing, forming, gluing, laminated bending, pressing, spot on profile fitting, veneering Other dimensions on request! DUOFORMER Maxi Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3380x1380mm Heating surface LxW: 3000x1250mm Heating drawer +230°C – 24kW Vacuum pumps 40m³/h, 80m³/h, 100m³/h Overall dimensions LxWxH: 3900x1600x1500mm DUOFORMER Mega For a whole length of solid surface material boards! Clamshell opening: work piece height approx. 650 mm Fpsdpsiquxgefx Ah Uep Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 4150x1780mm Heating surface LxW: 3850x1250mm Heating drawer +230°C – 32kW Vacuum pumps 80m³/h, 100m³/h, 140m³/h Overall dimensions LxWxH: 4700x2050x1500mm UNIVERSALFORMERS Direct – Honest - Experienced

Year of construction: 1996, condition: excellent (used), Thermoformer Brand Multivac Model R 530 Machine number: 837 Year of construction: 1996 Power 15 kW Voltage 415 V, 3 Ph, 50 Hz, 35 A Fpsdjwa D A Aopfx Ah Usp Film width: 620 mm Form: (3x) 180 mm x 160 mm Labeler Brand MR Etikettiertechnik GmbH Model MR293 Machine number: 23646/05 Year of construction: 2004 Overall dimensions: 8800 mm x 1400 mm x 1960 mm Including suction device for resting film Dimensions: 600 mm x 500 mm x 1060 mm Without main vacuum pump, vacuum was regulated centrally, labeler is incomplete.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! Fjdpod S Eagofx Ah Uepp RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm Fpodpjiimw Aefx Ah Uep The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Year of construction: 2016, condition: excellent (used), I have 3 pieces. Fpsdpfx Ajwi E Rysh Uop Brand: Multivac Model: R085 Type: Thermoformer Year: 2016 Production hours: 5,011 Power supply: 400V, 50Hz Power: 7 kW Film width: 420 mm Max. film thickness: Soft or hard film Max. forming depth: 80 mm Cut-off length: 240 mm Machine dimensions (L x W x H): 2,900 × 1,100 × 1,500 mm Machine weight: 700 kg. It is possible to make a tool with any division. Upper film brake with photocell. BUSCH Vacuum Pump We are able to make a new tool for each machine!!!

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000kg Operating voltage: 400/415V 50Hz Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) Fpsdpfsrfn Rvox Ah Uop For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Year of construction: 2008, condition: new, the machinery newer use one hours production years 2008 Our thermoforming machine APS ML 7100 was built for heavy-duty, industrial-sized demands. With its solid stainless steel frame construction, this high-performance system will stand up even in the harshest operating conditions. The dimensions of this flexible model Fpedpfxshtrtcj Ah Uep were made for large formats and high productivity. An intelligent monitor control offers differentiated calibrations for the demands of a variety of products. Output: up to 3000 cups/h Cups/cycle: 4 Compressed air consumption: 3200 Nl/min Steam consumption (2 bar): 10 kg/h Pneumatic system pressure: 6 bar Mould cooling water: 8-10 l/min Installed power: 40 kW Rated voltage: 380 V - 50 Hz Dimensions (approx.): - length: 6500 mm - width: 1650 mm - height: 3000 mm

Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing. Fedpfx Asvzt Huoh Uspp

Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker! Paternoster For the membran press membrane press Fedpsbgdv Iefx Ah Ujpp FOILS-STORAGE-PATERNOSTER for the foil-roles stock and at the membrane press Technical Description: Height of the paternoster 3800mm Max. foil width 1600mm Max. foil diameter 500mm 12pcs bearing rods Size of the paternoster 1000x2370x3800mm Inclusive foil transporter (trolly) Drive capacity 1,5 kW Total upload 4080 kg at a max. rolls weight of 340 kg Tools weight incl. Up weight- 5240 kg Specific ground-load capacity (1,89 to/m²) Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm Side panels - total all over the overall height Protection lattice from 2,2 metres over the floor to the over edge overall-height Load chain as a hollow-bolt chain Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster Rotation speed ca. 5,5 m/min Control with a key-switch with return (TOTMANN) for switch on/off Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A Mains (net) fuse (construction sided)- 10A inert NO Price on request

Year of construction: 2018, condition: excellent (used), The Techno D electronic vibrating channel dosers of the K series are the ideal solution for automatically weighing all products up to 8 cm. Furthermore, the simplicity of maintenance allows use within everyone's reach. All Techno D electronic vibrating channel dosers can be used semi-automatically thanks to the help of a special pedal, automatically, by connecting them to our packaging machines, or on thermoforming, thermosealing and third party machines. Fpsdeh Rm Tpspfx Ah Usp

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker! Function: The feeding tray of the press is in position, the work piece carpet is pressed under the holding device. With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device. Fpjdpfxed S Dqne Ah Ujp Advantages: • The 3D-thermoforming productivity increases- because of quick clearing the table • Savings of time and staff - the preliminary cutting-out of the pressed parts is removed completely • Simple handling of the boards • The foil edges of the 3D furniture doors are not damaged, because the foil is not pulled over the edge of the door • Automatic transfer of the whole carpet to a carpet trimming machine is optionally available. • The pins will be protected with this turn over system because the cutout of the over standing foil is made not on the pin table. Details: • Rigid welded frame construction to accommodate the machine parts • Standard size 2800 x 2220 mm x 1200 mm • Hydraulic power unit • Turn table consisting of 9 arms with a special surface of rubber • Vacuum system with hose connections for the turn table • Turning cycle approx. 18-25 seconds • Control System: Siemens LOGO • Protective fences and security devices For the presentation of the turning process, a video is available.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore Fpedpfod S Efajx Ah Usp thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm