Used Thermostat for sale (201)

Condition: new, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,530 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3617-26-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 190 cm - External dimensions (LxWxH): 542 x 229 x 253 cm - Floor loading height: 53 cm - Perm. Total weight: 2,600 kg - Unladen weight: 860 kg - Payload: 1,740 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/65R14 - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100km/h approval: Optional EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 40mm/sheet steel) - Roof material: Sandwich (sheet steel/foam 40mm/sheet steel) - Color: Grey - Number of pallet spaces: 6 - Tipping / lowering function: Without - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, U-profile - Mudguards: Plastic mudguards - Side door: No - Cooling unit: GOVI Arktik 1600 N - Temp. Control range: +2 C to +10 C - Cooling capacity: 1800 W - Rear doors / tailgate: Rear doors - Locks for box body: Press lever lock - Drive-on angle: - - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Yes - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum control of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing light - Automatic reverse drive - Plastic mudguards - 13-pin plug - Large reversing light - Large reversing light - Large reversing light - Large reversing light Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar Podpfju Hrvpex Aklogp

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,180 mm, loading space width: 1,730 mm, loading space height: 1,880 mm, loading space volume: 10.3 m³, color: white, construction height: 2,580 mm, working width: 2,280 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with doors, refrigeration unit / Pure Ferro thermal body, * IMMEDIATELY AVAILABLE * with doors, refrigeration unit / Pure Ferro thermal body Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,500 kg - Unladen weight: 900 kg - Payload: 1,600 kg - Interior dimensions: 318 x 173 x 188 cm (L x W x H) - Overall exterior dimensions: 464 x 228 x 258 cm (LxWxH) - Loading sill height: 60 cm - Tires: 195/65R15 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 30mm - Roof material: Thermo sandwich body 30mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: Yes - Tailgate: No - Tailgate material: Thermo sandwich 30mm - Tailgate/door function: Espagnolette lock - Clearance dimension tailgate/flap: - - Interior light: 12V LED & 230V interior light - Supports: optional - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized in an immersion bath - Continuous side members - Load area made of multi-glued screen printing plate, 18 mm - PurFerro, Thermo-Sandwich construction - sandwich panels with a core of foamed polyurethane with a top layer of galvanized and polyester-coated sheet steel on both sides - insulation 30 mm PU core - rear door stainless steel hinges - espagnolette lock and stainless steel door holder - refrigeration unit (different makes possible, depending on the pictures) - refrigeration capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - air volume flow evaporator: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display is lockable and thus protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - 12 volt interior light - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights - Large rear lights - Large rear lights. Plug - Reversing light - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Accessories can be retrofitted - please enquire: - anti-theft device - rear supports + front supports - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Pedsu Hru Ejpfx Aklsgp

Condition: new, empty load weight: 995 kg, maximum load weight: 2,005 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,560 mm, working width: 2,290 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3417-30-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 340 x 175 x 190 cm - Exterior dimensions (LxWxH): 542 x 229 x 256 cm - Loading height of floor: 59 cm - Perm. Gross vehicle weight: 3,000 kg - Unladen weight: 995 kg - Payload: 2.005 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Pgedsu Hrvispfx Aklop

Condition: good (used), Spray booth water stabilizer Technical data: Agitator Pump Filling spout Ø 9 cm Thermostat display Pgedpfxjiu Hwuj Aklep Level indicator Ø 176cm H: 67 Thickness 3mm More articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Pedpfx Akex Ihg Isljgp Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* Psdpsx Ihiiofx Aklegp - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Rieber WE-H Tube Stacker Pgjdpfxjxqzrte Akljp For warming, stacking, and transporting a wide variety of tableware in the restaurant, hotel, catering, and communal catering industries. Stainless steel stacker, max. load 150 kg, with a multifunctional mesh platform for different tableware sizes, anti-tilt and anti-skewing. Adjustable spring force. Stainless steel casters according to DIN 18867, Part 8, wheel diameter 125 mm, 2 swivel casters, 2 swivel casters with brakes. Shaft dimensions: 590 x 290 mm Thermostat control +30 °C to +110 °C. Rated voltage: 1N AC 230 V 50 Hz Weight: 55 kg Manufacturer price: €3,013 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Bartscher Refrigerated Countertop 0°C to 10°C One appliance – double the benefits: the fan-assisted cooling system ensures a constant and even temperature inside the countertop, which features one door and four drawers. The high-quality, robust stainless steel surface integrates seamlessly into any kitchen and can also be used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door type: Hinged door(s) • Number of doors: 1 • Number of cabinets: 1 • Refrigerated cabinets: Yes • Refrigerated drawers: Yes • Standard drawer size: 1/1 GN Podpfxoxuqyne Akljgp • Power consumption: 0.452 kW | 230 V | 50 Hz • Height-adjustable feet: Yes • Temperature range: 0 °C to 10 °C • Height adjustable: 850 mm to 900 mm • Backsplash: 50 mm • Cooling: Fan-assisted • Refrigerant: R134a • Digital display: Yes • Maximum GN container depth: 150 mm • On/off switch: Yes • Climate class: 4 • Drawer dimensions: W 299 x D 572 x H 190 mm • Reversible door hinge: Yes • Cabinet dimensions: W 335 x D 570 x H 554 mm • Number of shelves: 1 • Temperature control: Thermostatic • Control: Knob • Indicator light: On/Off • Temperature control: Electronic, in 0.1 °C increments • Power consumption: 230 V 50 Hz 452 W • Condensation evaporation: Yes • Thermostat: Yes • Work surface material: Chrome-nickel steel • Material: Chrome-nickel steel • Energy efficiency class: C (EU No. 2015/1094) • Dimensions: W 1792 x D 700 x H 850 mm • Weight: 134.8 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! Pedpfxswb A Hij Aklogp International shipping costs on request!

Condition: good (used), Electric griddle with open base with 2 heating zones, each 4.2 kW operating temperature of each heating zone adjustable from 120 to 280°C (thermostatically controlled) cooking surface inclined 1.5° forward for grease drainage 1.5 mm thick stainless steel front and top panels, stainless steel side and back panels Scotch-Brite finish, rounded edges on all sides IPX4 - splash-proof Podpexvy Hysfx Akljgp standard with grease drip tray and 3-sided stainless steel splash guard with height-adjustable feet (+50 mm) External dimensions (W x D x H): 800 x 700 x 850 mm cooking surface dimensions (W x D): 730 x 540 mm cabinet dimensions (W x D x H): 680 x 640 x 420 mm Weight: 80 kg Find more items - new and used - in our shop! International shipping costs on request!

Condition: like new (used), Rofin RoHS WKH/W-13000-W-MC-SON-3-D Laser Cooling System Laser Cooling System Rofin RoHS WKH/W-13000-W-MC-SON-3-D Rofin Controller LasCon WaC 2 Pedpfsq Hdw Usx Akljgp Störk Tronic Thermostatic Controller Buschjost Solenoid Valves 400 Volts Unused stock Financing through our bank is also possible. komplett-konzept.leasingo.de More new and used items available in our shop! International shipping costs on request!

Condition: new, internal dimension 550 x 730 x 400 mm 0 185 l operating pressure 5-8 bar weight 50 kg dimensions 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Pgjdjupxigspfx Akljp Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers.

Year of construction: 2021, condition: new, Gastro M Electric Griddles Demonstration unit without original packaging. NEW unit with warranty. The Gastro M series is robust, powerful, energy-efficient, easy to clean, and has a modern look. All devices are made of stainless steel and can be connected with connecting bridges. Gastro M is the indispensable link in the professional kitchen. Electric griddles with smoothly polished grilling surfaces. Fast heating time, built-in grease collection drawer, thermostatically controlled zone with built-in on/off switch and indicator light. Easy to clean. Stainless steel housing High-quality cast iron plate Integrated grease collection drawer Adjustable thermostat Even heating Suitable for base cabinet AGL913 & underframe AGL911 Specification: Gastro M Pgedpfx Ajhgwd Tekljp Model 60/30FTE 300mm wide Power: 3kW/400V Dimensions: 600(D) x 300(W) x 280(H)mm Weight: 27kg Accessories available upon request. If you would like a detailed consultation, please contact us. All dimensions = approximate dimensions Photo similar

Year of construction: 2026, condition: new, Continuous fryer ( ELECTRIC, GAS, OIL ) or frying train ideal for a large production auromatically, having the minimum use of labor and with high productivity. This chain fryer is designed for pre-fried, fried potatoes, fried foods such as croquettes, marble foods, flamenquines, nuggests, cachopo, plate of ham and cheese,... ,pastry products in general such as: churro, fritter, doughnut, xuixo, donut, creme filled pastry; Nuts: peanut, almonds, cashews,... Even for baking pasta. Thanks to its extremely simple control panel, it is easily programmable. Simply enter the ideal frying temperature on the thermostat and select the belt speed most suitable for the product. Our continuous cycle fryer saves you time in production. TECHNICAL CHARACTERISTICS: Psdpfxog A Tvke Aklegp - It incorporates a speed variator that allows the regulation of the cooking time of the product that is made, with the intention that it always has the ideal cooking time and adapted to an infinity or products. - It allows a homogeneous frying or cooking, with less oil absorption at a lower cost thanks to the reuse and filtering of the oil. Thanks to this, the oil is more durable and of higher quality. - Optional availability of including extraction hood in the fryer itself. - Easy cleaning and disassembly. - Oil filtering system by means of a re-circulating pump to the tank. Mobile machine with brake Connection 240 / 400V, o G20 (GN) G30(GLP) Dimensions see various dimensions. New machine With warranty. Price from 12.230€ FEC60 = 60 Liters FEC70 = 70 Liters FEC100 = 100 Liters FEC150 = 150/225 Liters FEC250 = 250/370 Liters

Condition: new, functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Pgjdpowiwv Ijfx Aklop Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Year of construction: 2023, condition: new, functionality: fully functional, For sale is a new gas stove from Cookmax from a return. › With electric oven, 6.00 kW, static › Baking chamber: 535 x 580 x 270 mm › 6 burners: 2 x 3.50 kW, 2 x 5.70 kW, and 2 x 7.00 kW › Ignition burners with pilot flame › Equipped with safety thermostats › Deep-drawn cooking well › Raised edges as overflow protection › With neutral cabinet compartment › Stainless steel housing › Factory set for natural gas › Electrical + gas connection rating: 400 V Electric: 6.00 kW, Gas: 32.40 kW Dimensions: 1200 mm x 700 mm x 850 mm (W x D x H) Series: Black Model designation: Q70PCLF/GE1204 Voltage: 400 V Connection rating: 6.00 kW Weight: 128.6 kg Pjdpfoxzq Tusx Aklogp CMX-131206

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, usable tank capacity: 400 l, rotational speed (max.): 3,000 rpm, Process plant for the production of emulsions, creams, ointments, pastes, lotions, suppository masses. The plant consists of the following components: - Heatable stainless steel vessel with double jacket - Lifting column for hydraulic raising and lowering of the lid - Swiveling control panel - Steel housing with hydraulic and vacuum pump for water circulation - Discharge device for the jacket TECHNICAL DETAILS Usable volume: 400 l Total volume: 480 l Minimum volume: 105 l Mixing unit speeds Anchor scraper agitator (1.5 kW): 20 rpm Toothed colloid mill (5.5 kW): 3,000 rpm Dissolver (5.5 kW): 1,500 rpm Disc diameter: 250 mm Connection diameter: NW 32 mm MACHINE DETAILS Motor power hydraulic pump: 1.1 kW Motor power SIHI vacuum pump: 1.5 kW EQUIPMENT - Thermostats and solenoid valves for temperature control - Fryma type PK 84/25 discharge pump - Sight glass with lighting and wiper - Diaphragm vacuum gauge - Connection for external compressed air supply - Ventilation device Pjdpfx Akoxt E Iqelegp - Cleaning wash nozzles

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle Pgodpfx Ascwamxsklsp • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Condition: new, Year of construction: 2025, Automatic Packing Machine: SIEMENS PLC Controlled, equipped with volumetric cups system. Applicable for the granule packing. Standard Features integrate metering, bag-making, packaging, sealing, printing and counting. Standard positioning with servo film transporting system. Stable for transporting film with two synchronous belts. High automation with auto correction function. Reasonable structure, convenient adjusting operation and maintenance. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; bag size: L(50-230mm), W(50-150mm); the max width of packing film: 320 mm; thickness of film: 0.04-0.09mm; bag making mode: pillow bag, gusset bag; range of measuring: 150-500ml; air consumption: 0.8Mps 0.25m³/min; power/voltage: 2kW/220V, 50Hz; dimension (LxWxH): 1200×905×1300mm; weight: 300kg; body: SS304; touch screen SIEMENS, PLC SIEMENS, control valve SIEMENS, servo motor PANASONIC, Cylinder and pneumatic components SMC/FESTO, Solenoid valve SMC/FESTO, triplet union SMC, Thermostats OMRON. - Volumetric cup device: Suitable for automatic measuring of small granule materials and powder materials with good fluidity, such as granulated sugar, seeds, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/min; weight range: 100g-500g; soft brush with motor: the turntable is equipped with a soft brush to handle the product carefully; auger system: range 1-50ml; accuracy: within +/-0.1g; max. speed of the machine in neutral: 50 cycles/min; power source: 220V, 50Hz/110W. - Please note: This is only a sample system. Please let us know your requirements. Pgedpfx Ajv Nmhbsklop That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Pgodpfx Ash Tyrwsklop Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Pjdsd I T Exspfx Akljgp

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place. Pgjdpoh Tymrefx Akljp

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. Pgedpfx Akex Sygholsp It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: ready for operation (used), ONLY THE MACHINE NO BLOCK!!! The Thermo ALPS 30 manual heat sealer effectively protects your samples from evaporation and contamination during PCR or sample storage. The ALPS30 manual heat sealer is ideal for sealing small batches of plates in low- to medium-throughput applications, and compact enough to fit conveniently on the bench without occupying excessive space. The Thermo microplate heat sealer makes it easy to protect your samples against contamination and evaporation. The Thermo ALPS 30 Heat Sealer is compatible with almost every height of microplates, blocks, and PCR plates. The ALPS30 can be used with a wide range of Thermo heat seals, such as pierceable, optically-clear and permanent seals to ensure the highest level of protection. Additionally, the Thermo microplate sealer is equipped with a built-in thermostat for precise temperature control and features an LED indicator light that signals when the device is powered on and heating. Key Features of the Thermo ALPS30 Heat Sealer: Benchtop Manual OperationBuy Used Thermo ALPS30 Heat Sealer. Adaptors Compatible with Most Heights of Microplates, Blocks, PCR Plates Compatible with Wide Ranfe of Thermo Heat Seals Pierceable Optically-Clear Permanent Seals Pgedpfox Rhr Aox Aklep Prevents Contamination Prevents Evaporation Built-In Thermostat LED Indicator Light: Powered On & Heating

Condition: good (used), Year of construction: 2021, machine/vehicle number: 22112P114, Offer 24107 Technical data: - Pump station unused in mint condition - Pump make DELIMON type FZ-B 3.75 ccm/m. - Flow rate 7.6 cm³/min - Pressure capacity up to 200 bar - Lubrication unit fill level Pgsdpfxetyli Ne Aklop - thermostat - fan - 400 V electrical connection - installed in RITTAL switch cabinet with hinged lid and two hinged doors - Space requirement approx. W 1100 x H 1100 x D 500 mm - Weight approx. 100 kg