Used Transfer Hot Press for sale (17,720)

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram Gsdpjv Srfwofx Abrjtu - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, Year of construction: 1990, pressure 100 t Gedpfjyif Nrsx Abrstu table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Gtjdpfx Asx Twb Sebreu

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW ++ NEW Unox Speed Compact Hot Air Oven NEW ++ NEW Unox Speed oven for baking, cooking & steaming Touch control/operation with ADAPTIVE Cooking & SPEED Plus 384 cooking programmes & 10 favourite programmes can be stored Tray size 300 x 300 mm Temperature range from +30°C to 280°C Oven-Microwave-Hot Air Flows Dimensions: 424 x 669 x 616 mm (W x D x H) Connection 220-240V, Schuko plug New unit with warranty & spare parts service Gedpfx Aoxckaksbrjtu Quality from a specialist company! Benefit from over 35 years of experience! Options: Special trays Spees.Bake tray Quick.Rinse hand shower Speed Marks Ethernet connection DDC.App Spray & Rinse cleaner Maintenance contract Delivery service Commissioning & instruction Visit our large oven showroom!

Condition: good (used), input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Dough Divider and Rounder Record Automat Roll Press for dividing and rounding Godpfxerhfp Ue Abrjtu Dough input from 750 to 2550 grams 30 pieces / 25 to 85 grams per piece with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 690 x 580 x 1650 mm (W x D x H) Used machine Delivery service Many more roll presses in stock!

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW ++ NEW Unox Stefania Loading Oven NEW ++ NEW Convection oven Stefania Convection oven for 3 trays 460 x 330 mm Stainless steel design with front glass panel Manual controls Adjustable temperature range from 80 - 260°C Connection: 220-240V, Schuko plug Dimensions: 600 x 655 x 429 mm (W x D x H) Oven is NEW with warranty + spare parts service Quality from professional supplier! Benefit from over 35 years of experience! Godpfxexckads Abrotu Options: Baking trays Aluminium perforated trays Lievox proofing cabinet Base frame Maintenance contract E-Box Delivery service Instruction & commissioning Visit our large oven exhibition!

Condition: used, Year of construction: 1981, pressure 100 t Gtjdpfovgnnqox Abreu punching cross-cut in cmm -- stroke 100 mm throat 510 mm work height max. 1100 mm Twist power 31 Durchm. in 25 mm channels - flange 100-400 mm Number of ventilators 80-400 mm 100-400 mm 100-550 mm punch stroke bei 20 mm Hub: 60 p.Min sheet thickness max. bei Luftbiegung: 10 mm total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,7 x 0,9 x 2,3 m Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 480 - 4045 mm 4 pieces less used of upper tools: Gedpfxouh E Rys Abretu tool No 5 length: 3050 mm, dimensions see sketch, price = 710,- tool Nr 6 Length: 3073 mm, dimensions see sketch, price = 970,- tool No 9 L = 1925 mm divided, dimensions see sketch, price = 850,- tool Nr.10 length: 1520 mm, dimensions see sketch, price = 850,- Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, pressure ca. 5 t dayligth 110 mm throat 40 mm weight of the machine ca. ca. 50 kg dimensions of the machine ca. 1,2 x 0,5 x 1,3 m 6 t (estimaeted) hand-operated spindle press. The machine is professionally Gjdpfxjxr Rave Abrotu and durably lashed. Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 3050 - 4020 mm 4 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Deer foot upper tool No.2 length: 4020 mm, dimensions see sketch, price = 780.-- (Image 5 & 6) Deer foot upper tool No.4 length: 3050 mm, dimensions see sketch, price = 650.-- Prices plus VAT (Image 7 & 8) Machine dealer with own stock of 1600 m². Gtjdpfx Ajva I Spobrou

Condition: used, pressure 6 t dayligth 180 mm spindle diameter 32 mm throat 115 mm ram stroke 90 mm table surface area 300x270 mm weight of the machine ca. 70 kg dimensions of the machine ca. 800 x 1350 mm 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m². Godpfx Abjvgnnworstu

Condition: used, chamfer lenght 1370 mm Gedpfx Ajul Ew Asbrotu Various tooling: 65 x 40 mm with 4 openings: 8, 10, 10, 35 mm. 6 pieces: 1370 mm Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, chamfer lenght 3055 mm Various tooling: 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - Tool No. 4:_ 60 x 40 mm with 4-fold opening: 30, 10, 9, 7 mm, length 3050 mm, Price €750. No. 3: Bottom rail for split bottom tools (matrices) 80 x 30 mm, opening 40 mm, length 3050 mm, price €350 Gjdpfx Abjva I S Aoretu Tool 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. 2 pieces: 1500mm and 1300mm. Price €750. (Photo 5 & 6) Prices excl. VAT Machine dealer with own stock of 1600 m².

Condition: used, stamp capacity 2 - 63 mm throat 110 / 200 mm Various Destaco punching iron, some with accessories: No. 3: Type 102-200, accessories: approx. 12 sets of punches and dies, technical data: see picture, price per piece incl. accessories: 350,- No. 6 & 7: Type 103-200, accessories: approx. 12 sets of punches and dies, Gtsdpfx Abouu S Dnsrju technical data: see picture, price per piece incl. accessories 500,- 1 Raskin punching iron type 10 JL 200, throat 210 mm, install height 238 mm, material thickness 3 mm in max. 40 kg/mm². pice 175,-- EUR 1 Raskin punching iron type 15 BL 100, throat 110 mm, install height 149 mm, material thickness 3 mm in max. 40 kg/mm². pice 120,-- EUR Diverse punching dies. We can also sell each of them. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2006, sieve 6 mm engine 2x90 kW ca. 660 mm Gjdpfsyi Ht Iox Abrstu 2 Capacity ca. 3.000 - 5.000 kg/h

Condition: ready for operation (used), Year of construction: 2009, operating hours: 94 h, functionality: fully functional, machine/vehicle number: GS000526, Size 36 x 52 cm, Alcolor Vario dampening, Technotrans cooling and recirculation, inking unit temperature control, Anicolor inking units, double sheet control, sidelay control, blanket wash device, roller wash device, impression cylinder wash device, Autoplate, IR dryer, extended delivery. Machine no.: GS000526, Impressions: 95 million Gtodsyhn Tmopfx Abrju

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Gtjdpfx Abert Uc Ejrju Machine is disassembled Technical data on request

Condition: used, Year of construction: 1977, Used machine Year of manufacture: 1977 Condition: Currently still in production Technical data: Gtodpfx Absyig Hfjrou Plate size: 2200 x 1100 mm Max. opening: 315 mm Heating medium: Electric Pressing pressure: 2.7 kg/cm² Cylinders: 4 Including safety cable Dimensions: 2540 x 1220 x 1850 mm Weight: Approx. 2500 kg Location: Hesse Availability: End of March 2026

Condition: good (used), Year of construction: 2000, Used conventional press brake from Baykal Model APH 3110 180 Capacity 3100 x 180 tons Gtjdpsyhmkqefx Abrou Electric back gauge and depth adjustment (Elgo NC controller) Includes 1 set of tools

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, year of last overhaul: 2026, Dough Divider and Moulding Machine TOP Model Roll Press Fortuna Automat Gr. 3+ with moulding deactivation Gsdpfx Asw H H N Ssbrjtu Interference guard with protective corners Electrically operated rear head cleaning Dividing head with new stainless steel blades Robust technology Dough divider with 3 moulding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Refurbished used machine with warranty and spare parts service Options: Platform or chassis Moulding plates Service package Maintenance contract Delivery service Spare parts box Training & commissioning

Condition: excellent (used), functionality: fully functional, total length: 700 mm, total width: 600 mm, total height: 1,220 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: AC, Loading oven Eloma Backmaster EB 30 T double station TOP convection oven tabletop unit Gsdpfx Ajxxgmrsbrotu for 3 baking trays with exhaust hood on top Stainless steel construction Only from us DGUV V3 inspected 2 x 230V connection Dimensions: 600 x 700 x 1220 mm (W x D x H) Used unit with warranty & spare parts service Quality from a professional workshop and service partner! Benefit from over 35 years of experience! Options: Baking trays Water filter Base frame Maintenance contract Delivery service Spare parts box for increased safety Service package Instruction & commissioning Many more ovens available in stock!

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Roll Divider and Rounder Fortuna Automat A 3 H + Dough Divider and Rounding Machine Top Model Roll Press Fortuna Automat size 3+ with rounding deactivation Safety guard with protective corners Electric rear head cleaning Dividing head with stainless steel knives Dough input up to 2400g depending on dough consistency Dough divider with 3 rounding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (WxDxH) Used machine + spare parts service Quality from a specialized workshop! Benefit from over 35 years of experience! Gjdpfx Abjxvk Rierotu Options: Platform or mobile base Rounding plates Service package Maintenance contract Spare parts box for extra security Delivery service Commissioning & induction More top dough dividers in stock!

Condition: ready for operation (used), controller manufacturer: Cadman-B Touch, throat depth: 400 mm, installation height: 400 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, power: 42 kW (57.10 HP), travel distance Z-axis: 200 mm, empty load weight: 24,000 kg, passage width: 5,050 mm, table width: 120 mm, 9 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 / V 4 plaatsteunen aan de voorkant laserkluisbeveiliging Willa-gereedschap Capacity: 220 ton x 6100 mm Backgauge: CNC Godpfxjyhibxj Abrstu Locking speed: 120 mm/sec

Condition: ready for operation (used), controller manufacturer: Bosch, nominal power: 5.9 kW (8.02 HP), All tools indexing Full option machine!! Rotating tool adaptor Aut repositioning device with footpedal Programmable footpedal Auto toolchanger with 22 stations 3 plate clamps Programmable chute for parts 500 x 500 mm Container for workpieces Punch spray lubrification 2nd lubricant container Exhaust device Chip container Rapid shutdown of hydraulic system External control panel Graphic workshop programming Workshop programming SW package for PC Safety equipment RJ45 network connection options: - MultiTool - MultiShear - MultiBend - Deburring tool - Threadforming - Chipconveyor - Automatic closing of clamps - Part trap detection sensor Gtedpfx Abeyhib Sjrsu Nice selection of tools inlcuded + punch tool grinder Punching pressure: 180 kN Max sheet thickness by punching + nibbling: 6,4 mm Max weight workpiece: 230 kg Working range on cross-side (X-axes): 3000 mm Working range along (Y-axes): 1600 mm Positioning speed along X-axes: 90 m/min Positioning speed along Y-axes: 60 m/min Toolchanger: 22 tools Changingtime: 0,3 / 3 sec

Condition: used, Year of construction: 1984, Plate dimensions 3000 x 1350 mm Daylight opening 400 mm Number of daylights 1 St. Total pressure 3,5 - 5,5 to Dimensions (L/W/H) 3530 x 1520 mm weight of the machine ca. 6500 kg Number of pressing cylinders 6 Stk. Ott Veneer Press Type Stabil-3013 ----- Technical Manufacturer's Description: -Pressing area: 2,500 × 1,350 mm -6 cylinders -Replaceable aluminum plates -Protective film -Plate size: 3,000 x 1,350 mm -Total pressing force: 135 t, 3.5 - 5.5 kg/cm² -Operating pressure, max. 340 bar -Pressure cylinders: 6 x 90 mm diameter -Opening width: 400 mm -Weight with 2 plates: approx. 6,300 kg Gedeyif S Tjpfx Abretu -Overall length: 3,530 mm -Overall width: 1,520 mm -Overall height with 2 plates: 2,000 mm -Motor power rating: 2.2 kW -Power rating per electric heating plate: 11.2 kW -Consumption per plate: Approx. 4.5 kW/h -Heating time 20 - 100 degrees Celsius: approx. 20 min -Consumption per hot water heating plate: approx. 9000 W/h ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT.