Used Vertical Boring Machine for sale (84,509)

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Caedpfx Agjxxlr Tscsa Total height 4000 mm Weight: approx 9 T

Condition: used, Year of construction: 1993, max. wheel diameter 125 mm Cedpfetugkrsx Agcjaa total power requirement 34 kW kW weight of the machine ca. ca6.9 t t dimensions of the machine ca. ca. 3.3 x 2,1 x 2,5 m m

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Codewqr S Topfx Agcoaa Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Cajdpfx Agou Nyxwecoa Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter installation on request. price free on truck Rotterdam.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Caedpfxsxxkkbj Agcsa Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg Cedpfx Agsxr Aw Teceaa

Condition: excellent (used), Year of construction: 2004, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 40,000 rpm, An OPS 600 HSC Ingersoll in excellent condition is for sale. Only 14,000 power-on hours according to the counter. No graphite machining! Control: Andronic 2000 Year of manufacture: 2004 Travel distances: X = 600 mm, Y = 350 mm, Z = 300 mm Table size: 630 mm x 500 mm Fully enclosed work area Csdpfx Agoxxkpkeceaa Dust-protected linear guides 30-position chain-type tool changer Full-featured 3D path control Max. traverse speed: 15 m/min Max. acceleration: 8 m/s² Tool length measurement system (Blum Laser) Infrared probe (Type M&H) Compressor cooling unit: Cooling capacity 500 Watt, CFC-free High-frequency spindle (milling spindle): HF spindle type Classic 100 A8; Spindle power 9 kW; continuous power 100 %, duty cycle 5 kW; Speed 40,000 rpm; Tool holder HSK 32 Automatic tool clamping Permanent liquid cooling Frequency inverter type 403 S Digital frequency inverter Serial interface RS 232 – analog control possible Output power 6 kVA; Incl. load-dependent signal 0–10 V and spindle speed detection Fully automatic tool change Compressed air connection: 6 bar Control/software: Andronic 2000; Windows NT 2000 operating system Linear, circular, and spline interpolation for up to 8 simultaneously interpolated axes and 4 main spindles; feed rates > 300 m/min at 0.1 μm resolution by the control; 2 axis groups, each with a master axis and up to 4 slave axes Block changeover time < 0.5 ms Included accessories: As-new TEKA extraction unit Filter Cube 2N, 2.2 kW, 20 m², with new filter elements; M&H probe HSK 32; operating manual Note: Tool holders, vices, etc. can be purchased separately. Videos available Availability: short notice Price includes free loading

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm gear width . mm max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t Csdpfx Aewhq Afogcsaa dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW Cjdpfx Aexq Hkzsgcoaa weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) Caodpsxdl Raefx Agcoa - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm Cedpfxev Rrq Do Agcoaa turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm Caodpjxr Aw Hofx Agcsa - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Codpfx Aexdnrasgcjaa Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: used, Year of construction: 1988, max. wheel diameter 150 mm gear width . mm max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m Cedpfxswhq Eae Agceaa

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis Cedpfoxqrgzsx Agcjaa - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Extras: Includes various tool holders, rotating table, user manuals Cjdpfjun Siwsx Agcjaa

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Csdpfextgnfjx Agcsaa Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2003, Rilesa VLG 1524 Casdpfx Asu Shzfsgcja 3 drilling units from above 2 right/left aggregates

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Caedperrv T Iofx Agcja Minimum bag length: 100 mm Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: used, Year of construction: 1989, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500x 2700x 3600 m Cjdpfx Agjwhq Egjcoaa

Condition: used, Year of construction: 1984, functionality: unexamined, machine/vehicle number: B30157, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, table length: 600 mm, table width: 380 mm, table load: 300 kg, spindle mount: MK 3, total height: 2,545 mm, total length: 1,700 mm, table height: 965 mm, total width: 1,330 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 900 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 2,500 rpm, drilling capacity: 30 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 85 mm, spindle diameter: 100 mm, spindle motor power: 8,200 W, workpiece weight (max.): 300 kg, rotary table diameter: 200 mm, Additional specs: Resolution: 0,001mm Max. capacity of boring: 220mm Machine weight: 2500kg Additional equipment: - One rotating table with two rotating axis. - Collets, clamping elements miscellaneous, tool holders. - Documentation for machine Cjdjungrgopfx Agcoaa

Condition: used, Year of construction: 1986, max. wheel diameter . mm gear width . mm max. module . Cjdsucgw Dspfx Agcjaa weight of the machine ca. 7 t

Condition: used, Year of construction: 1968, functionality: unexamined, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Largest drilling diameter into solid material: 55mm for cast iron with feed: 0,6mm/rev. Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Cedpfxounhd Ro Agceaa Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m Casdpfjucgw Rex Agcea

Condition: used, Year of construction: 1981, functionality: unexamined, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm - Spindle extension - 710mm Caedpfx Agjunrhaecsa - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine