Used Wide Belt for sale (16,005)

Condition: excellent (used), Year of construction: 2013, Wide belt sander COSTA Series S7 XCTTX 1350 Year of manufacture: 2013 Serial No.: LB331014A Dcjdpfx Ahoxp I Tuj Ujp Connected load: 98 kW Weight: 10,000 kg Dimensions (W x H x D): approx. 350 x 320 x 350 cm 60 Shore

Condition: used, Working width 1350 mm Number of sanding units 2 st. Dcedormucxspfx Ah Uop Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: good (used), Year of construction: 2009, functionality: fully functional, Sanding width 1100mm Workpiece thickness 3-160mm Djdpfx Ahowkuwxe Uocp 2 sanding units 1st unit: Calibration roller 2nd unit: Combination roller-shoe Texturing brush unit

Condition: ready for operation (used), Year of construction: 1994, Ott EURO WS 110 Wide Belt Sander 2-Belt Combination 1st Unit: 90 Shore grooved rubber roller 2nd Unit: Shoe unit with time-controlled air sanding shoe Working width: 1100 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 160 mm Belt size: 1900 x 1120 mm Dsdpfoxp N Iasx Ah Ujcp Sanding belt speed: 18 m/sec Feed speed: 5/10 m/min Total connected load: 12.5 kW Price: 8,200.-

Condition: excellent (used), Wide Belt Sander SCM Sandya 20 3M 135 Working width: 1350 mm Working height: 3-170 mm Number of sanding units: 3 Steel calibration roller: 18.5 kW Rubber roller: 12 kW Combi unit with segmented pad: 11 kW Cleaning brush at outfeed Vacuum pump Feed speed adjustable via frequency inverter Optical oscillation Dcsdpjxhgr Hefx Ah Ujp Sanding belt: 1370x2620 mm

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left Dodpfx Ahsxp Hvnj Uscp 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: like new (used), Working width 300 mm Mechanical oscillation Rubber roller Shoe Two-stage feed speed Weight approx. 450 kg Dcsdpfjxp I Dmjx Ah Uep Star-delta motor start Safety switch 380 V

Condition: excellent (used), Year of construction: 1999, working width: 1,100 mm, power: 15 kW (20.39 HP), Wide belt sander in good condition. Equipped with roller and combination roller. Extracts on carpet flooring, ideal for sanding smaller items. Sanding width 1100 mm. Europe-wide transport can be organized at a good price. Dcsdexmfhdspfx Ah Usp

Condition: used, Technical details: Working width: 1700 mm Workpiece thickness max.: 150 - . 4,0 mm grinding belt dimensiones: Umlauf mm machine dimensions LxWxH: 4,8 x 2,7 x 2,35 m For woodworking!!!!! pneumatic conveyor guide height adjustment via hand wheel EMERGENCY STOP switch - grinding rolls adjustment - band clamping device - roller conveyor ( infeed and outlet each L: 2800 x W: 1700 mm each with6 pc Rolls) motoric driven - operation via control panel Dcsdpsu Ng R Hefx Ah Uop - worpiece thickness min./max. 4,0/150mm - grinding belt width 1300mm - grinding belt support length / width: 1700/1350mm ON SALE AS IS without electric cabinet, because machine was operating in a production line with other machines and one electric cabinet! Machine won't be connetcted! *

Condition: new, Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,620 mm, grinding belt width: 1,400 mm, Heesemann multi-purpose surface grinding machine, type HSM .4 NEW Edition RQHD ROLLER/TRANSVERSE/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Stand construction with transport bed With continuous transport carpet, feed speed 3 - 15 m/min. frequency-controlled, workpiece thickness (3 - 200 mm) motor-adjustable Automatic workpiece thickness measurement in the machine infeed Workpiece suction clamping system with adjustable vacuum for transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each in the machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touch screen version, display for production and downtimes. Ethernet connection possible. Program memory for 100 programs Program for remote maintenance Program for extraction flap control For the extraction flaps/sliders to be installed by the customer, the external pneumatic valves can be controlled with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC) via the pre-installed, potential-free relay contacts. MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - Outfeed and infeed LED strips as operator assistance for the workpiece (infeed workpiece positioning for better sanding belt utilization, outfeed indicates workpiece position) - Belt manager status display on the unit (screen) Dcedpfxeu Ic Rgo Ah Uop - Aggregate information with grain size (screen) - Visualization of the position of the workpiece as it passes through through the machine. - Video camera in the outfeed of the machine 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency converter 1 longitudinal sanding unit with pressure flap belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with pressure flap belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency converter Infinitely variable adjustment of the sanding belt speeds, wear-free braking device, automatic compensation of any differences in belt edge lengths, sanding belt working in counter-rotation, oscillating sanding belt cleaning, adjustable. 2 pressure bars with computer-controlled selective pressure control system CSD® (10 year warranty) In addition, the electromagnetic CSD® system is maintenance-free, as there is no risk of contamination as with pneumatic elements. 1 Rotating disk brush unit DB-S 10 driven disk brushes, working in 2 directions of rotation, central height adjustment for abrasive wear, incl. quick-change device for disk brushes Brush fill: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of a temporary interruption in the power supply Energy Management System EMS Belt support side: left Terminal: front left Workpiece stripping device LED lighting inside the machine (on the belt support side) Further information on request.

Condition: excellent (used), Through-feed sander Tornado Cindy 400 Working width 400 mm Sanding height 3 – 200 mm Dsdpfxsxhc Rfo Ah Uecp 1 combi unit Electric height adjustment Optical oscillation Two feed speeds

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Dodpou Hlzfofx Ah Uecp Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: excellent (used), Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Dcodpfxoxp Dtqj Ah Ujp

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AE/020112, total width: 1,300 mm, overall weight: 2,750 kg, number of rollers: 4, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Overall width: 1,300 mm Electrical data Rated voltage: 400 V Frequency: 50 Hz Dsdpfx Asxmhiweh Uocp Phases: 3 ~ Rated current: 180 A Short-circuit current: 10 kA Max. load current: 420 A Weight: 2,750 kg EQUIPMENT Two rollers at the top Two rollers at the bottom Note: The machine was dismantled as part of a liquidation and is loaded onto a truck. The machine was fully operational at the time of dismantling.

Condition: like new (used), Working width 1350 mm The machine is in excellent, new condition as shown in the pictures. Djdouuitgopfx Ah Uscp

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts Dcodpfxjwcqr As Ah Usp - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: excellent (used), Wide Belt Sander Biesse Levia 110 Working width: 1100 mm Working height: 3-200 mm Number of units: 2 Steel calibrating roller Combi unit with sectional pad Main motor power: 11 kW Feed speed regulated by frequency inverter Optical oscillation Sanding belt: 2150x1120 mm Dedpfsxhc Ahox Ah Uecp

Condition: new, Year of construction: 2022, machine/vehicle number: MR004406, Wide belt sander with a maximum working width of 950 mm. The maximum working height of this machine is 170 mm. Price is ready to use, provided with cord and hine is equipped with the following options: - Machine in accordance with CE regulations - Activate calibration roller via switch on control panel - Activate sanding shoe via switch on control panel - Automatic table positioning with thickness sensor - Automatic centering of feed carpet Technical specifications: - Number of sanding units: 1 - Sanding unit 1 type: Combi calibrating sanding shoe - Maximum sanding width: 950 mm - Maximum working height: 170 mm - Minimum working height: 4 mm - Feed speed: 4.5/9 /min - Sanding belt length: 1,525 mm Dsdpfx Aol Dxgyeh Uecp - Sanding belt width: 970 mm - Motor power: 10 hp - Serial number: AB00024845

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Dcodpoq Tp H Hefx Ah Uop Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Documentation available: No Financial information Dcjdpfxjxb N Tge Ah Usp VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, working width: 1,300 mm, overall weight: 4,000 kg, working height: 1,000 mm, height adjustment type: electric, transport height: 1,000 mm, Calibrating / Wide Belt Sander Manufacturer: Costa Model: 71 CCT 1350 Working width: 1300 mm Equipped with: 1x calibration roller (hard rubber approx. 80 Shore), 22 kW, sanding belt dimensions 1380 x 2620 mm 1x calibration roller – newly rubberized (hard rubber 60 Shore), 18.5 kW, sanding belt dimensions 1380 x 2620 mm 1x sanding pad, 15 kW 1x dust removal brush 1x blow-off unit Feed speed adjustable, 4 – 24 m/min. Conveyor belt with vacuum Vacuum blower with silencer Dcjdpsxl N Thjfx Ah Usp Working height: 1000 mm Height adjustment of the upper machine part (easy integration into existing production lines) Connection: 380 V 50 Hz, 200 A Total connected load approx. 65 kW Dimensions approx. 3000 x 2500 x 2400 mm (LxWxH) Weight approx. 4000 kg

Condition: used, Year of construction: 2001, Year of construction 2001 1 unit 1 combined contact roller/sanding pad unit, with sanding belt grit adjustment and calibration device Steel contact roller (profiled) Automatically feeding contact roller Electronically controlled link pressure beam in compact design, element width 50 mm Djdpei Eu Aqofx Ah Ujcp Program-controlled adjustment of the sanding pressure of the individual segments Unit drive with electronic, wear-free brake 3-way pole-changing drive motor 3.7/7.5/15 kW (sanding belt speeds 4.5/9/18 m/s.) Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm Machine complete with rubberized pressure rollers Pneumatic sanding belt tensioning with integrated sanding belt edge compensation Terminal with 50 freely programmable sanding programs for fully automated machine control Belt feed with 4 and 8 m/min Price: 14.900 € plus VAT

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: LB431013A, working width: 1,350 mm, overall weight: 7,200 kg, power: 79 kW (107.41 HP), type of input current: three-phase, input voltage: 400 V, The Costa Levigatrici K7 CCCFF 1350 is designed for wood surface processing, including sanding, scaling, and brushing of solid wood, veneered, or laminated components. With a working width of 1350 mm and a high installed power of 79 kW, it is suitable for industrial use in woodworking shops, furniture factories, or production lines. It ensures high precision and excellent surface finish. We have two units of this machine, both manufactured in 2014. Technical Data: Dcedpsxm R Szefx Ah Usp Power supply: 400 V / 50 Hz Installed power: 79 kW Year of manufacture: 2014 Total weight: 7.200 kg Working width: 1350 mm

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation Dsdovf D S Aepfx Ah Uecp - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Year of construction: 1994, Wide belt sander Manufacturer: Bütfering Dcjdpfsvuza Nox Ah Uop Type: AWS 2 KC 1100 Year of manufacture: 1994 Working width: 1,100 mm Max. passage height: 150 mm Number of sanding units: 2 Sanding roller power: 15 kW Sanding shoe power: 11 kW Feed power: 1.5 kW Feed: 3 - 15 m/min, continuously adjustable Weight: approx. 3,300 kg Dimensions: 1,750 x 2,210 x 2,280 mm