Condition: excellent (used), Year of construction: 2018, Hartford LG-500 Vertical Machining Centre Year: 2018 (only 400 working hours) Model: LG-500 Control: Hartford Plus 3 Table Size: 620 x 420mm Table Load: 300 kgs Axis Travels X/Y/Z: 620 / 420 / 450mm Spindle Nose to table: 100 – 550mm Spindle Taper: 40 INT Fs Ia Ttiswif R Tjuepg Spindle Speeds: 12,000 RPM 12 station ATC Machine as new

Condition: used, Year of construction: 2021, Serial number: WFDFLT2200101xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19960 Specifications: Model year: 2021 Axle: 2-axle Wheelbase: 181 cm Length: 960 cm Length on plan: Approx. 640 cm Width: 255 cm Tires: See pictures Lift on 2nd axle: Yes Air suspension: Yes Trailer hitch: VBG Tool cabinet: Yes Fps Ia Tev U Sizstiujg Ready for delivery: Yes Description: Fliegl Nor-slep flatbed trailer from 2021, very little used. The trailer is ready for delivery. Technical approved: Yes EU-approved until: 26.03.2026 Own weight: 4100 Total Weight: 20000 Payload: 15900 Width: 255 Length: 960

Year of construction: 2012, Condition: good (used), Used plant for production of 99.5% technical glycerin from 80-85% crude glycerin using multi-stage distillation and rectification. Plant was commissioned in 2012. Technology and design are by Desmet Ballestra Oleo. Fpo Iaoqffygo Ttiuog

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Fpj Ia Ttswh N Uyeiujg Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm Fpo Ia Tjwidy Totiueg MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: excellent (used), Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Fs Iaowif Rmj Ttiuspg Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM

Condition: used, Year of construction: 1987, operating hours: 17,500 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20029 Specifications: Model year: 1987 Hours: Approximately 17,500 Weight: 15,400 kg Engine replaced with an engine that has run approx. 4,000 hours Bucket with new steel Tires (see pictures) Brake pads replaced in 2024 Gaskets replaced Extra front clutch Spare wheel Rear view camera Rotor lamp Fj Ia Ttijv U R I Aouspg AC/climate Video available Delivery by appointment Description: Volvo L120 wheel loader from 1987, equipped with a new engine that has run approx. 4,000 hours. The bucket has had new steel, and the seals have been replaced. The right front cylinder has a small leak, but the current owner has had no problems with this. Spare wheel included. Delivery by arrangement. Hours: 17500 Total Weight: 15400

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 300 h, Doosan Lynx 2100 LYB CNC Lathe Model: Lynx 2100 LYB Year: 2019 Control: Fanuc I Series Max. Turning Diameter:300mm Max. Turning Length:510mm Fpo Ia Ttswif Npjiusg Spindle Bore: 65mm Chuck Size: 200mm dia. Spindle Speed: 4500 RPM Spindle Power: 15 kw Turret Stations: 12 Machine with: Swarf Conveyor Driven Tooling Virtually Unused Since New (Under 300 Hrs) Dimensions: 2800 x 1711 x 1850mm Weight: 3900 KGS

Condition: used, Year of construction: 2006, operating hours: 6,050 h, Field of application: Construction Serial number: CAT0321CEKCR0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20036 Specifications: 2006 model Hours: approximately 6,050 Power: 103 kW Weight: 25,200 kg Hydraulic sanding bucket Excavator bucket with teeth Chassis (see pictures) Central lubrication Work light Air conditioning/AC Ready for delivery Description: CAT 321C LCR short hedge from 2006, equipped with hydraulic sanding bucket and toothed bucket. The machine has just over 6,000 hours. It is ready for delivery for quick delivery. Fo Ia Tsv U Samstiuepg Hours: 6050 Total Weight: 25200 Kw: 103

Condition: excellent (used), Year of construction: 1997, Bridgeport VMC 500/16 Vertical Machining Centre Year: 1997 Control: Heidenhain TNC 370 Table Area: 830 x 360mm 'X' axis Travel: 500mm 'Y' axis Travel: 340mm 'Z' axis Travel: 525mm Spindle Taper: BT 40 Spindle Speeds: 7000 RPM Toolchanger: 16 station Fpe Iaewif Rae Ttiujg

Condition: used, Year of construction: 2019, Please contact ATS Norway AS for more information Please provide reference number upon request: 19957 Fo Iaev U R Nyj Ttiuepg Specifications: Model year: 2019 Bottom: 7 mm Hardox 500, reinforced with 5 mm Hardox 450 Length: 4.6 meters Width: 2.55 meters Height: 1.1 meters Volume: 12 m Ready for delivery: Yes Description: This 2019 model Mailler tipper body is equipped with a robust 7 mm Hardox 500 bottom, which is further reinforced with 5 mm Hardox 450 for extra durability. The body is in excellent condition, almost unused, and above all like new. It is ready for delivery and can be put into operation immediately.

Condition: excellent (used), JUNG JF520EI Automatic Surface grinder. Model: JF 520 E1 Year: 1989 Table Length: 600mm Table Width: 250mm Wheel dia. 250mm Wheel width: 51mm Max, wheel speed: 4200 RPM Fps Ia Towhwltotiuog Machine with: Electro Magnetic chuck Diaform profile wheel dressing attachmnet Coolant Tank with paper filter roll on conveyor system

Condition: used, mileage: 283,000 km, Year of construction: 2005, Serial number: YS2R8X4000200xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19966 Specifications: Fe Ia Ttev U Swleiujpg EU approval: Valid until 29.05.2025 Model year: 2005 Km: Approx. 283,000 Transmission: Manual Suspension: Steel front and air rear Tires: See pictures Length: 930 cm Width: 255 cm Wheelbase: 195/276 cm Curb weight: 21,780 kg Length on plan: Approx. 540 cm Trailer hitch: Yes Power: 469 hp Rotor beam: Yes Bed: Yes Damage: Small damage to the back of the cabin (shown in pictures) Tool cabinet: Yes Radio/CD: Yes Air conditioning: AC/climate Crane Specifications: Certification: Valid until 01.2026 Crane model: Palfinger PK56002, 2005 model Capacity: 56 t/m Hydraulic extensions: 6 hydraulic 2 manual Winch: Yes Support legs: Yes Description: Scania R470 crane truck from 2005, equipped with a Palfinger PK56002 crane (56 t/m) and winch. The car is ready to be put into operation. There is a small damage to the rear of the cabin, which is shown in the pictures. The machine can be delivered at short notice. See video for more information. Km: 283000 HK: 469 Technical approved: Yes EU-approved until: 29.05.2026 Own weight: 21780 Total Weight: 34000 Payload: 12145 Width: 255 Length: 930 Euro: 3 Gearbox: Manual

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Control: DECKEL DIALOG 4 Fpj Ia Towhwhbjtiueg Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw 380V - 3 PHASE Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Condition: used, Year of construction: 2001, operating hours: 13,320 h, Field of application: Construction Serial number: K3xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18892 Specifications: - 2001 model - Certified until 02.25 - Hours: Approx. 13,320 - Weight: 24,500 kg - 118 kW - Undercarriage (see pictures) - Belt width: 60 cm - KM quick release - Gjerstad Grave bucket - Extra light - Easy Dig Novatron - Radio/CD - Climate/AC - Services taken by owner - Videos are available - Ready for delivery Description: Fpo Ia Ttisvgx Rpousg Komatsu PC290 Tracked excavator from 2001. The machine is sold with a quick-release attachment and digging bucket. Certified until 02.25. Video of hydr. Pump and motor are nearby. Hours: 13320 Total Weight: 24500 Year controlled: Yes Year controlled until: 02.25 Kw: 118

Condition: ready for operation (used), Butler Hi – Power Elgamill CNC Bed Type Milling Machine REFURBISHED AND RETROFITTED IN 2012 Model: HI – POWER Elgamill Year: Refurbished and retrofitted in 2012 Control: FAGOR Table Size: 5000 x 1200mm Long Travel: 3300mm Vertical Travel: 1000mm Cross Travel: 850mm Spindle Taper: 50 INT Spindle Speeds: 30 – 2080 RPM Machine with: Fpo Ia Ttiewhcbasuog 26” dia. power rotary table.

Condition: used, Year of construction: 2017, operating hours: 9,700 h, Field of application: Construction Serial number: KMTPC250HHC00xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 14437 Fs Ievgxq Aoa Ttiuspg Specifications: - 2017 model - Hours: Approx. 6700 - Weight: 23,800 kg - 123 kW - Central grease - S70 quick release - Undercarriage (see pictures) - Belt width: 60 cm - Width of the machine: 300 cm - Additional hydraulics - Bunker pump - GPS - Rototilt - Grave bucket - Cleaning bucket - Reversing camera - Rotor lamp - Extra light - Ledbar in the front - Radio/CD - Climate/AC - Video - Service history - Ready for delivery Description: Komatsu crawler excavator from 2017 in good condition. It comes with GPS, tilt and 2 buckets. Can show service history and is ready for delivery. Hours: 9700 Total Weight: 23800 Width: 300 Kw: 123

Condition: used, mileage: 600,699 km, Year of construction: 1990, Serial number: YS2RH6X2Z0114xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19850 Specifications - 1990 model - 600,699 km - Not Eu-approved - Manual transmission - Repair item - Tires (see pictures) - 6x2 - Front suspension: steel - Rear suspension: steel - Bogie lift - Hiab crane - 14 t/m Hiab - 2 Hydraulic extensions - 2 Manual extensions - Length on plan: 6,465 m - Ready for delivery Description: We have a 1990 Scania R143 H 6x2 Timber truck Repair item w/ 14t/m Hiab crane aggregate. The car is being sold as repair item as it is not Eu-approved and is therefore in uncertain condition. Both car and crane work, but some additional costs must be considered. Ready for delivery. Km: 600699 Technical approved: no Own weight: 10400 Total Weight: 27500 Fe Iasv U Svho Ttiujpg Payload: 17025 Width: 250 Length: 896 Gearbox: Manual

Condition: used, Year of construction: 2010, Serial number: YAFTL30810000xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20099 Trailer (3-axle) 3 axles Lift: 1 ton Tires: Okay Swing: On 3. axle 10.5 ton axles 6 ton winch Hydraulic drive bridges with new cylinders Remote control Ready for delivery Notes: New cylinders on the axles New drums and strings (August 2024) New wiring and various lights Laser Axis check performed (March 2025) Fpj Ia Ttiov U Shwsuog Technical approved: Yes EU-approved until: 31.08.2025 Own weight: 11900 Total Weight: 49500 Payload: 37600 Width: 255 Length: 1375

Condition: used, Year of construction: 2013, operating hours: 11,910 h, Field of application: Construction Serial number: CAT0324ETTLF0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19783 Specifications: - 2013 model - Hours: Approx. 11,910 (can increase) - Chassis (see pictures) - Central grease - S70 quick release - Tiltrotator - Excavator bucket - Sanding bucket - Narrow bucket - Ripper tooth - Hammer hydraulics Fe Ijv U R Txsa Ttiuepg - Radio/CD - Air conditioning/AC - Maintenance is done by owner - Ready for delivery Description: CAT 324 Crawler excavator from 2013. The machine is sold with Rototilt, 3 buckets and Ripper tooth. Tilt needs some maintenance. Ready for delivery. Hours: 11910

Condition: used, Year of construction: 2017, Field of application: Construction Serial number: 1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20023 Description: We have LDR Drilling Tower w/ hh20 hammer and s40 attachment for sale. Everything works as it should according to the owner. The hammer was replaced in 2020. The owner says it is about 7-8 years old (2017/2018). Ready for delivery. Fpj Ia Ttiev U R Upouog

Condition: used, mileage: 358,392 km, Year of construction: 2012, Serial number: YS2R6X4000207xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19944 Fs Iasv U R N Te Ttiujpg Specifications: - 2012 model - Eu-approved until: 21.02.26 - 358,392 km - Euro 5 engine - Automatic transmission - 620 HP - Central lubrication - Diesel heater - Front suspension: steel - Rear suspension: steel - 6x4 - Tires (see pictures) - Air conditioning/ac - Leather seats - Radio - Lights - Video - Delivery by arrangement Description: We have a 2012 Scania R620 6x4 Tipper truck for sale. The car has just been Eu-approved to function as it should according to the owner. Errors and defects may occur as the car is from 2012. Delivery by arrangement Km: 358392 HK: 620 Technical approved: Yes EU-approved until: 21.02.2026 Own weight: 13500 Total Weight: 30000 Payload: 16425 Width: 255 Length: 742 Euro: 5 Gearbox: Automatic

Condition: used, Please contact ATS Norway AS for more information Fps Ia Tjv U R Hxstiueg Please provide reference number upon request: 19727 Description. 2 vang tilting stools for transporting wide steel plates and the like. Transported diagonally on a trailer. They have recently been sandblasted and varnished. Ready for delivery

Condition: used, Year of construction: 2016, operating hours: 11,000 h, Field of application: Construction Serial number: HCMDDN50J0006xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19936 Specifications: Certified until: October 2025 Model year: 2016 Operating hours: Approximately 11,000 hours Power: 197 kW Weight: 31,600 kg Chassis: See pictures New chains Leica GPS Engcon Tiltrotator S70 quick release Sanding bucket Excavator bucket Webasto Central lubrication Additional work light Rotor beam Fpe Iov U R U Aja Ttiujg LED bar Rear camera Radio/CD Air conditioning/AC Description: Hitachi ZX300 crawler excavator from 2016. This excavator is equipped with Leica GPS, two buckets, and Engcon tilt, as well as new chains. It is certified and ready for immediate operation. The machine can be delivered at short notice. Hours: 11000 Total Weight: 31600 Kw: 197

Condition: used, Please contact ATS Norway AS for more information Please provide reference number upon request: 19974 Description:Water tank with high-pressure pump for flushing. The tank capacity is 13,000 liters. Fj Ia Ttjv U R H Eoiuepg Can be delivered at short notice.