Year of construction: 1987, Condition: good (used), machine/vehicle number: 7491029, This grinding mill from Rapid is in the Plastima Used Machinery machine storage room. The machine is from 1987. - Brand: Colortronic - Model: M400L Delqz Istphhvjfpskl - Serial number: 7491029 - Feed opening: 400 x 160 mm - Number of rotor knives: 8 knives - Year of construction: 1987

Condition: excellent (used), Year of construction: 2020, Austropressen AP 25 semi-automatic baler with lift-and-tilt device, built in 2020 Technical specifications: Manufacturer: Austropresse Type: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Baling: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: Paper, cardboard, foil, metals, foams, etc. Note: The baler is in very good condition. Complete documentation is included. Please note: All technical specifications refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Dkoljwifi Njqz Ifpol This offer is subject to change, prior sale, and revocable at any time. Viewings are possible by appointment. The sale is ex works, subject to advance payment, without warranty or guarantee.

Condition: ready for operation (used), power: 67.051 kW (91.16 HP), total length: 5,800 mm, total height: 1,800 mm, load capacity: 500,000 kg, net weight: 23,500 kg, operating speed: 12 mm/s, retraction speed: 25 mm/s, total depth: 1,828 mm, Machine has been repainted in white Horizontal hydraulic bulldozer press max open: 1980 mm Range of applications: - Breaking up anodes or castings - Bending and straightening structural sections, I-beams and channels - Bending and straightening plate - Punching, piercing, slotting and notching - Cutting off heavy angle stock - Straightening shafts and bars - Drawing, forming or corrugating flat stock - Straightening rail - Forming heavy steel rings from flat bar stock - Bending tube and pipe Dkjlqzjwhrwqe Ifpsl Max ram adjustment: 760 mm High speed displacement: 24 mm/sec

Year of construction: 1993, Condition: good (used), This grinding mill from Rapid is in the Plastima Used Machinery machine storage room. The machine is from 1993. - Brand: Colortronic Dolqzetphf As Ifpokl - Model: M200L - Serial number: 72930024 - Feed opening: 200 x 200 mm - Number of rotor knives: 4 knives - Year of construction: 1993

Condition: ready for operation (used), travel distance X-axis: 40,000 mm, travel distance Y-axis: 6,100 mm, Length of rails: 90 000 mm (2x) Two independant cutting units first cutting unit: - head 1: marking - head 2: plasma bevelling 3D powered by one 600 amp esab plasma unit bevel angle: -45° to +45° +/- 540° rotation range Dksljwhrw Roqz Ifpel second cutting unit: - head 3: marking - head 4: plasma straight cutting powered by two 600 amp esab plasma units capacity stainless steel 45°: 75 mm capacity stainless steel 90°: 125 mm plate detection system atomization system water treatment with osmosis and decalcification watertank for demineralized water 3 Esab Hypertherm plasma units 600C 2 L-Tec WK 300 marking units width of the track: 8000 mm lot's of spare parts and accessoires included 17 kVa Newprice was 1,2 million euro Cutting capacity: 125 mm stainless steel Read-out / Control: Vision 51

Condition: good (used), Year of construction: 1996, This inspection system is from Zumbach Electronics AG at Plastima Used Machinery in machine storage. The machine is from 2015 and is in good condition. - Brand Zumbach Electronics AG Dkjlotpnfbjqz Ifpel - Type Simac 63 - Year of construction: 2015 - Number of cameras 3 - Pipe diameter min. 2 mm - Pipe diameter max. 50 mm

Condition: ready for operation (used), total length: 11,582 mm, total width: 3,104 mm, total height: 2,816 mm, net weight: 43,200 kg, Model: SR 2000x6000 4 guideways 2 steadies included smallest dia with smallest steadie: 275 mm Dslqzewhrxhs Ifpjkl biggest dia with smallest steadie: 715 mm smallest dia with biggest steadie: 570 mm biggest dia with biggest steadie: 1015 mm Distance between centers: 6500 mm Swing over bed: 2000 mm Swing over cross-slide: 1600 mm Diametre of main spindle bore: 380 mm Power on main spindle: 100 kW Number of speeds: 1,4 > 280 rpm Total power needed: 110 kW Chuck (3/4 pinch) -- diametre: 1920 mm Max weight between centers: 50 ton

Year of construction: 1997, operating hours: 76,200 h, Condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200 Dkjlqz Ifjtpg D Uspel

Condition: ready for operation (used), net weight: 17,500 kg, Spur helical gears lot's of tooling included max height: 650 mm max dia hobs: 273 mm tabledia: 1016 mm number of teeth: 100 400 speed: 6 100 rpm Delqz Ifswhrx Ispskl Maximum DP in Steel: 1.5 DP Face Capacity Spur Pinions and Gears: 30" ( 750 mm) Face Capacity 45 Degree Helical Gears: 18" (450 mm) Maximum Diameter Spur Gear With Support: 48" (1200 mm) Maximum Diameter Spur Gear Without Support: 90" (2286 mm) Maximum Diameter Helical Gear w/o Sup (45 Degrees): 72" ( 1800 mm) Minimum Centers Work Hob Arbors: 4" (10 mm) Maximum Diameter Hob: 10.75" Diameter of Work Table: 40" Diameter of Index Worm Gear: 48" Index Range Including Primes: 15 - 100 Index Range Excluding Primes: 100-400 Number of Hob Speeds: 14 Hob Speed Ranges: 6-100 RPM Drive Pulley: 600 RPM Number of Feeds: 12 Feed Range: .03 - .200" Motor HP Requirements, Machine: 15 HP Motor HP Requirements, Traverse: 5 HP Motor HP Requirements, Coolant: 3/4 HP Max. Modul: 34 Max. Dia: 2286 mm Dimensions: 4700 x 1920 x 3060 mm

Year of construction: 1990, Condition: good (used), This haul-off saw, manufactured by Battenfeld Extrusionstechnik GmbH, is stored in the machine store of Plastima Used Machinery. The machine was made in the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: SAW MODELL SU630P Dslqzjtpnbuj Ifpokl Year of construction: 1990 Voltage: 380 V Power: 6,25 kW Pipe diameter max: 110 mm to 630 mm

Condition: ready for operation (used), controller manufacturer: NC Positip 850, total length: 6,020 mm, total height: 3,000 mm, net weight: 17,500 kg, total depth: 3,000 mm, met heidenhain NC Positip 850 maximaal werkstukgewicht: 3 ton geen contrapunt inbegrepen gereedschap inbegrepen ingebouwde voorplaat snelheden van de frontkop en de spindel kunnen gelijktijdig of onafhankelijk van elkaar draaien centrale smering van opleidingen Nauwkeurige 360° positionering van de draaitafel door optisch projectie-uitleessysteem snelheid: 1440 tpm Spindle Dia: 100 mm Spindle bore: ISO 50 Table dimensions: 1250 x 1250 mm Table longitudinal travel (X-axis): 1600 mm Dkjlqzewhrx Uj Ifpel Cross travel Table/colom (Y-axis): 1250 mm Height travel head (Z-axis): 1120 mm Max travel spindle: 900 mm Power on spindle: 15 hp/10 Kw

Year of construction: 1997, operating hours: 58,668 h, Condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Dkjljtpg Dnoqz Ifpel Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Condition: ready for operation (used), total length: 11,400 mm, total height: 4,000 mm, total depth: 3,000 mm, Fine levelling / high strength machine to stress-relieve laser- and plasmacut parts (steel/weldox/hardox) for straightening heavy plates in a single pass Type KRM120.2200/21T max workpiece width: 2000 mm 21 rolls - rolldia: 120 mm cassette changing system for rolls magnetic (un)loader power main motor: 74 kW cap 2000 mm: 40 mm cap 1000 mm: 75 mm max speed: 10 m/min full cnc control Siemens - renewed in 2012! Djlqz Ifswhryrjpekl levelling length: 350 - unlimited including 2 tables - table size: 4000 x 2000 mm Max sheetwide: 50 > 2200 mm Max sheetthickness: 5 > 75 mm

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm Djlotpf N Usqz Ifpekl - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: ready for operation (used), 1. Decoiler 7 ton - max length: 1550mm - max dia: 1600 mm - internal dia of coil: 455 530 mm - including coilcar 2. Leveller + slitting + cut to length - 4 levelling rolls - max width: 1550 mm - 7 slitting heads electricaly adjustable! - max cap: 2 mm - power: 14 kW 3. Table 4. Recoiler 7 ton - max width: 1550 mm - 19,8 kW power - internal dia of coil: 508 mm - including coil unloading arm 5. Scrap rewinder Delqzowhryxs Ifpjkl - max cap: 100 kg 6. control unit

Condition: ready for operation (used), Complete decoiling and cut-to-length line (weight: 12T) Including: * Coil Feed Lift car * Decoiler 15 Ton - Mandrel Ø 546- Ø 635mm - Coil width: 1375 mm Hydraulic lateral movement 305 mm * Roller Beveler: 17 Rolls (8 upper 9 lowerrolls ( Ø 38 mm x 1372mm ) + 2 entering rolls Ø 140 mm + 2 exit Rolls Every rolls is supported 5 times 60 HP DC Variable speed 100 m/min * Serapid evacution roller/Press table Can be completed with a Shear or Press (not included) Dkjlqz Ifewhr Ebopjl

Condition: ready for operation (used), total height: 2,400 mm, total length: 2,700 mm, passage width: 720 mm, power: 25.8 kW (35.08 HP), load capacity: 300,000 kg, net weight: 11,000 kg, total depth: 1,400 mm, Capacity: 300 ton Passage between uprights: 720 mm Stroke: 500 mm Table: 600 x 600 mm Power: 25,8 kW Length: 2700 mm Depth: 1400 mm Height: 2200 mm Max ram adjustment: 500 mm Doljwhrv Tsqz Ifpjkl Table area: 600 x 600 mm

Condition: ready for operation (used), Welding robot for big pieces The welding manipulators holding the workpiece can tilt up and down (max 45°) in order for the robot to be able to weld straight on the workpiece. This ensures the best possible weld. Cloos Romat 310 - 11 axes Rotrol 32 TM X-travel of robot: 11 000 mm Depth of throat: 2000 mm Max distance under robot: 3000 mm Max distance between manipulators: 10 000 mm Centerdistance of manipulators: 1750 mm each manipulator has a movement of 4000 mm Max height of workpiece: 3500 mm Max weight of workpiece: 25 ton 2 Cloos GLC 5033 Quinto welding scources linked in series to attain 1000 amp dimensions: 16 000 x 8000 x 7000 mm (foundation is needed) ----- Сварочный робот для больших, нестандартных заготовок. Сварочные манипуляторы позиционируют заготовку путем поворота и перемещения вверх-вниз (45°макс). Таким способом сварочный шов достигает максимальной точности. Производитель: Cloos Romat 310 - 11 координат Rotrol 32 TM Перемещение по оси Х: 11 000 мм Зев: 2000 мм Макс расстояние от сварочной головки до пола: 3000 мм Макс расстояние между манипуляторами: 10 000 мм Высота центра манипулятора: 1750 мм Dkjlqzswhrylo Ifpsl Перемещение каждого манипулятора: 4000 мм Макс высота заготовки: 3500 мм Макс вес заготовки: 25 тонн 2 сварочных источника: GLC 5033 Quinto - 1000 amp Размеры: 16 000 х 8000 х 7000 мм (требуется фундамент)

Condition: ready for operation (used), total height: 2,140 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), load capacity: 100,000 kg, net weight: 970 kg, total depth: 865 mm, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Dkolqswhrzcsz Ifpel Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Returningspeed: 9,06 mm/sec

Condition: ready for operation (used), max rvs: 3,5 mm max steel 37: 5 mm max width: 1600 mm including 3 slittingcassetes 1. Decoiler AM1600-27V + hydraulic loading cart HH27MB - coilcap: 27 ton - powered by 120 kW DC-motor - max outer dia: 2000 mm - weight: 28 ton + 8 ton 2. Straightener + Slittinghead + shear - max cuttingcap: 19 cuts at 5 mm (speed: 100 m/min) - max speed: 300 m/min at 2 mm - powered by 211 kW DC-motor 3. Soenen Recoiler OH1600-27V+ hydraulic unloading cart - cap: 27 ton - powered by 290 kW DC-motor - the pulling roll is powered by 119 kW DC-motor - max outside dia: 2000 mm - max speed: 300 m/min - weight: 33 ton 4. four-armed coil turning table Many tools and spare parts included Dkelqz Iewhr Aaefpel Total weight +-250 ton

Condition: ready for operation (used), net weight: 39,000 kg, Thompson X:3000 - Y: 1000mm Worklength with magnetic table: 3000 mm Grindingwidth: 1000 mm Longitudinal travel X-axis (autom.): 3000 mm Travel Z-axis (autom.): 1000 mm Dimensions of the table: 3090 x 920 mm Max dia grindingstone: 450 x 150 mm Deljwhr Dweqz Ifpjkl Motorpower: 16,5 kW

Condition: ready for operation (used), total length: 10,100 mm, throat depth: 510 mm, operating speed: 9 mm/s, table width: 300 mm, retraction speed: 90 mm/s, travel distance Z-axis: 350 mm, controller manufacturer: Delem DA 65, power: 35 kW (47.59 HP), net weight: 85,500 kg, passage width: 9,000 mm, total depth: 2,450 mm, 5-assige gestuurde persrem (Y1 -Y2 - X - R - bombardement in tafel) CNC Delem DA 65 grafisch 2D Heeft de optie voor hydraulische actieve bombardementen. Capacity: 420 Ton x 10100 mm Dslewhr D Roqz Ifpekl Backgauge: (3) CNC Max distance between table -- ram: 600 + 200 mm Locking speed: 100 mm/sec Height: 5020 + 1310 mm Bedknife: * Multi V-shaped clamp: *

Condition: ready for operation (used), total length: 825 mm, total height: 2,535 mm, net weight: 1,200 kg, total depth: 1,030 mm, Stanko 2H135 Admission in drilling-spindle (morse): MK 4 Dkjljwhrwdsqz Ifpsl Max drill capacity: 40 mm Table dimensions: 450 x 500 mm SPEEDS: 1400 rpm Motorpower: 4 kW

Condition: ready for operation (used), total length: 9,850 mm, net weight: 62,000 kg, total depth: 4,260 mm, forward motion of grinding wheel: 2 hp - 1150 rpm rotational motion of wheel: 40 hp - 1450/575 rpm head: 15 hp - 300/1200 rpm transmotion: 3/5 hp - 300/1800 rpm Center distance: 4300 mm Max dia of the workpiece: 1140 mm Dslqz Ifowhrxnjpokl Center height: 570 mm Motorpower: 40 hp

Condition: ready for operation (used), power: 100.576 kW (136.75 HP), workpiece length (max.): 3,100 mm, net weight: 32,000 kg, Machine was previously used to bend Hardox workpieces. bending capacities examples: - 3100 x 25 mm multi stage bending for large radiuses - 2500 x 30 mm multi stage bending for large radiuses - 3100 x 17 mm single stage bending - 2500 x 25 mm single stage bending full CNC corner + backgauge control upper hydraulic clamping of tools clamping force: 220 ton max bending angle: 110° max open: 500 mm Tooling included for radius bending Also 2 new extra cilinders included Type: hydraulic Courant needed: 380V Djlqz Iewhryfefpskl