Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 12,067 h, load capacity: 3,000 kg, lifting height: 5,555 mm, free lift: 1,720 mm, fuel type: diesel, mast type: triplex, construction height: 2,460 mm, fork carriage width: 1,150 mm, total length: 2,860 mm, engine type: VW, drive type: Diesel, construction width: 1,250 mm, net weight: 5,215 kg, Diesel Forklift Load Center of Gravity: 500 Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Fob Haewiacqj Ucqegb Front Tires Type: Super Elastic Front Tires Size: 27x10-12 Rear Tires Type: Super Elastic Rear Tires Size: 23x9-10 Description: In addition to this Linde model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase and financing at favorable conditions are always available. We are also happy to purchase your used forklift over the counter, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this H35D-02. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We'd be happy to display your vehicle for consignment sale. Sideshift, fork positioner, heating, full cab, full free lift,

Year of construction: 2018, Condition: used, New: No Field of application: Construction Serial number: 1302xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Feb Ha Ucjvgzv Isqsgb Ready for delivery.

Condition: good (used), power: 273 kW (371.18 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 13,956 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL220HJ00002729 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 35.500 kg Functional Lifting capacity: 10.080 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Tyre brand: Tianli Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,89x3,15x3,71 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information Feb Ha Ucswhfw Rjqjgb

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, total length: 11,055 mm, total height: 4,140 mm, net weight: 45,000 kg, total depth: 6,320 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm Fgob Ha Ucov Sfmusqeb

Condition: good (used), axle configuration: 3 axles, loading space volume: 32 m³, first registration: 02/1992, color: silver, Year of construction: 1992, Equipment: ABS, Empty weight: 8.280 kg Carrying capacity: 29.720 kg GVW: 38.000 kg Number of compartments: 3 Fjb Howhl A Hoa Ucqegb Technical condition: good Visual appearance: good Please contact Pedro or Arie for more information

Year of construction: 1995, Condition: good (used), Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, vibrator, sorting system, vibrating system, sifter -Manufacturer: Gebruder Schmidt, sorting and vibrating system type Gravex 1 Fgjbshbiwfs Ha Ucqob -Table size: 1210 x 900 mm, -Sieve table: can be tilted crosswise and lengthways, 2 pieces of sieves on top of each other -Blower: 2 pieces -Individual components: see photos -Dimensions: 1730/1455 / H1400 mm -Weight: 832 kg

Condition: new, The Basic 170 Super is a versatile lathe for single part production. Due to the large selection of optional accessories, these models are the best choice for repair, training and workshops of all kinds Feb Hjp Ebh Noa Ucqjgb

Condition: used, mileage: 900,000 km, Year of construction: 2009, Field of application: Freight transport Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19652 Truck specifications: - 2009 model - Km: Approx. 900.000 - Euro 4 engine - 500 HP - Automatic transmission - Retarder - 6x2 - Tires (see pictures) - Climate - Light - Radio Fgjbovyd T No Ha Ucqjb - Delivery by agreement Specifications hinge: - 1990 model - 4 axles - Lift on 1 and 2 axles - Swing on 3rd and 4th axle - Internal length of stage 1: 4,464 m - Internal length of stage 2: 8,709 m - Total internal length: 13,230 m - Manual widening - Tires (see pictures) - Hydraulic driving bridges - Delivery by agreement Description: Scania R500 truck with 4 axles damm machine semi-trailer Both the truck and trailer are EU approved. Should be seen. Delivery by agreement. Km: 900000 HK: 500 Technical approved: Yes EU-approved until: 16.04.2025 Own weight: 9860 Total Weight: 27000 Payload: 17065 Width: 255 Length: 720 Euro: 4 Gearbox: Automatic

Condition: good (used), power: 618 kW (840.25 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 13,900 h, Equipment: air conditioning, General information Field of application: Construction Serial number: CAT0775GKRFM00936 Technical information Fgeb Ha Ucswhfw Djqeb Chassis type: rigid AdBlue system: Yes Make of engine: C27 Acert Top speed: 67 km/h Empty weight: 46.383 kg Functional Cargo space capacity: 42.000 l Condition Technical condition: good Visual appearance: good Other information Max. working load: 70000 kg Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,073x5,673x4,419 Production country: US Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Fgjb Hsv Sfn Eja Ucqjb Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: used, Year of construction: 2023, operating hours: 1,117 h, 2023 | Caterpillar M318 with variable angle boom with Oilquick OQ80 quickcoupler (without attachment) | Used Wheeled Excavator | 1117 hours 📍Location: Germany, Sindelfingen 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 199000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good machine in working condition with small jobs to do. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37866 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed Feb Haowin Uho Ucqjgb ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 1993, Please contact ATS Norway AS for more information Please provide reference number upon request: 19442 Description: - 3 axles Fgob Ha Uevyfxmecqeb - Driving bridges - Ready for delivery Technical approved: Yes EU-approved until: 25.04.2025 Own weight: 6370 Total Weight: 30000 Payload: 23630 Width: 250 Length: 1155

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 5,243 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL180HEF0008019 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 38 km/h Empty weight: 29.700 kg Functional Lifting capacity: 8.710 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 9,98x3,96x3,58 Fgob Haowhfwwe Ucqob Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: ready for operation (used), Drukbuigmachine voor het buigen van buizen met en zonder doorn Buigen onder druk maakt het mogelijk om zeer kleine buigradiussen te produceren (minimale radius 1 x D). Hierdoor kunnen bijvoorbeeld ketelinstallaties met een hoger vermogen in kleinere afmetingen worden geproduceerd. Drukbuigen maakt ook het gebruik van zeer lange buizen mogelijk, omdat er geen doorn nodig is. De buislengtes kunnen achter de machine aan elkaar worden gelast en tot afgewerkte systemen worden gebogen, waardoor er geen paswerk nodig is. Bovendien garandeert drukbuigen de naleving van de voorgeschreven wanddiktetoleranties in de buisbochten volgens VGB. Vergeleken met conventioneel buigen met een doorn is de afname van de wanddikte aan de buitenzijde van de buis bij drukbuigen zonder doorn zeer gering. Bij gebruik van een buigdoorn maakt drukbuigen het mogelijk om bochten te maken uit dunwandige holle legeringsbuizen met zeer kleine buigradiussen (1 x D), omdat door drukbuigen de buitenwand van de bocht wordt ontlast Er zijn veel hulpmiddelen inbegrepen Drukbuigen of drukbuigen doornvrij koudbuigen Max dia tube x thickness: Ø 89 x 5 mm Fgsb Ha Ujv Sfivjcqob Max bendingradius: 180° Back stop max tubelength: 6000 mm Bending die: yes

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 115500 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "33296 Equippo" Fgjbswin Ubj Ha Ucqob 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, mileage: 544,567 km, Year of construction: 2000, Serial number: YS2K4X2000184xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 13959 Specifications: - 2000 model. - 544,567 km. - Changed dumper box last year. - Istrail tipper box, very good. - 6x2. - VBG trailer coupling. - Steel in the front, air in the back. - Good tires. - Bed. - Automatic. - Climate. - Radio/cd. - Wheelbase 335 cm. Fgsb Haovyf Afs Ucqjb - Euro 3. - 420 hp. Description: The Istrail tipper box was replaced some time ago. Delivery is agreed. Works as it should. Km: 544567 HK: 420 Technical approved: no EU-approved until: 12.07.2024 Own weight: 13750 Total Weight: 19100 Payload: 5275 Width: 255 Length: 1280 Euro: 3 Gearbox: Automatic

Condition: ready for operation (used), travel distance X-axis: 9,000 mm, Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruisende Y-beweging van de kolom: 650 mm Verticale Z-beweging van de freeskop: 3000 mm Horizontale W-beweging van de freeskop: 1200 mm Machine kan met 6 assen tegelijk werken 2 hydrostatische tafels CNC gestuurd - Gewicht op de tafel: 30 ton - Continue 360° - Dwarsverplaatsing van de tafel: 2500 mm Gereedschapswisselaar met 60 posities Freeskopsteun / support de renforcement de la broche Boorspindelsteun / ondersteuningsportfolio#39;s Cross traverse Y-axis (table/column): 650 mm (column) Vertical traverse Z-axis: 3000 mm Spindle traverse W-axis: 1200 mm Milling spindle taper (ISO): ISO 50 Dia spindle -- Spindle bore: 160 mm Digital read-out (1) CNC(2): Heidenhain TNC 530 Rotary table dimensions: 2 tables 2380 x 2380 mm Feb Haov Sfm Uo Ucqogb Max weight on table: 2 tables x 30 ton

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 220000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "33244 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery Fgjbewin T Rs Ha Ucqjb ❓Got machines to sell? Contact us for a free evaluation

Condition: used, mileage: 22,597 km, Year of construction: 1977, Serial number: BC01TM8xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18848 Specifications car: - 1977 model - Rep. Object Fgsbovgx Hqe Ha Ucqsb - 144 Hp - Km: 22597 - 4x2 - 3 way tips - Rear brakes warm driven - Engine and gearbox are broker - Comes with another complete engine and gearbox - Spare parts included - Climate - Light - Ready for delivery Specifications crane: - 1987 model - Sesame swing crane - 7 a.m - Extra hydraulics for boys - 2 Hydraulic outriggers - 2 Manual ejectors - Ready for delivery Description: Engine and gearbox are shared. Therefore sold as a rep object. It comes with a complete engine and gearbox with a lot of spare parts for the next owner. Grabb can be accompanied for extra cost Ready for delivery Km: 22597 HK: 144 Technical approved: no EU-approved until: 31.08.2018 Own weight: 7250 Total Weight: 13000 Payload: 5680 Width: 240 Length: 645

Condition: ready for operation (used), total height: 2,950 mm, total length: 11,400 mm, net weight: 4,900 kg, total depth: 3,350 mm, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Fsb Haev Tamrj Ucqogb Travel Z-axe (Height): 650 mm Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm

Condition: used, mileage: 182,059 km, Year of construction: 2008, Field of application: Freight transport Serial number: WV1ZZZ7HZ9H032377 Please contact ATS Norway AS for more information Please provide reference number upon request: 19655 Specifications: - 2008 model - 182,059 km - Euro 4 engine - 131 HP - Manual transmission - winter tires included - Replaced manifold - Replaced brake caliper - Replaced brake discs - Changed Brake Pads - Climate - Light - Radio - Delivery by agreement Description: All of the brakes on the car have been replaced recently, according to the owner. The manifold has also been replaced. The car has some dents and signs of wear. The rear window is also broken. (see pictures) This means that a small investment must be taken into account. Delivery can be arranged. Km: 182059 HK: 130 Technical approved: Yes EU-approved until: 08.05.2026 Own weight: 2115 Total Weight: 3000 Payload: 810 Width: 190 Length: 529 Euro: 4 Fjb Hovygd Dja Ucqegb Gearbox: Manual

Condition: used, mileage: 224,076 km, Year of construction: 2005, Serial number: ZCFA75C020247xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18554 Specifications: - 2005 model - 224.076km - 170 BHP - Euro 4 - Manual transmission - Rep. object - Permissible total weight: 7490 kg -Plan -Climate -Light - Ready for delivery Description: Iveco is sold as a Rep. Object as there is a lot to do with it  It starts and goes, says the owner. Some extra cost must be included here. Ready for delivery Fjb Ha Uovgxzzecqegb Km: 224076 HK: 170 Technical approved: no EU-approved until: 28.02.2021 Own weight: 4146 Total Weight: 7490 Payload: 3269 Width: 252 Length: 715 Kw: 125 Euro: 4

Year of construction: 2015, Condition: used, New: No Field of application: Freight transport Serial number: 2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18864 Specifications: - 2015 model - 13 m3 - Weight: 2300 Kg - Spreader - Ready for delivery Feb Haevgyhis Ucqogb Description: Spreader of 13 m3 for sale. There is some rust on the box. Ready for delivery Own weight: 2300

Year of construction: 2014, Condition: used, Field of application: Freight transport Serial number: 2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18861 Specifications: - 2014 model - 13 m3 - Weight: 2300 Kg - Spreader - Ready for delivery Description: Spreader of 13 m3 for sale. There is some rust on the box. Ready for delivery Fjb Hasvgxmwj Ucqjgb Own weight: 2300

Condition: used, mileage: 515,684 km, Year of construction: 2017, Serial number: YV2RT60G3JA81xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17421 Specifications car: - 2017 model - 515,684 km - Automatic transmission - Retarder - Euro 6 - 551 Hp - Air suspension - Length: 1015.2 cm - Width: 254 cm - Tires - Been on silver service agreement - Bed - Light - Fridge - Climate/ac - Ready for delivery Description: The truck has been on a silver service agreement with Volvo. Sold as chassis Ready for delivery Fgob Hsvgyluja Ucqjb Km: 515684 HK: 550 Technical approved: Yes EU-approved until: 29.08.2025 Own weight: 16145 Total Weight: 36000 Payload: 19780 Width: 254 Length: 1015,2 Kw: 405 Model: 6 Gearbox: Automatic