Condition: used, Year of construction: 2022, liter capacity 980 l Pressure of pump 8 / 80 bar total power requirement 16,7 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): Djlimcaewhzm Isneut - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 80V 4PZS 500AH - special trough Dolimcowii Hroanjut REMA 320 A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L1,027 x W708 x H784 mm Weight: approx. 1,260 kg Capacity: min. 90-100% (C5 report included with delivery) Suitable for and more... Still EFG 1502 / C-71 Toyota 8FBMKT25 Atlet BALANCE Atlet EH 25 Baumann EX 25-40 Caterpillar EP25K PAC Charlatte T135 Charlatte T165 Charlatte T20 Doosan B30NS Hyster E2.0-3.2XM TCM FHB20-E1 TCM FHB25 All common battery sizes available.

Condition: good (used), Year of construction: 1986, Functionality: fully functional, cutting diameter 420 mm saw band length 6300 mm cutting width 420 mm capacity 90 degrees: square 420 x 420 mm cutting speed 20 - 130 m/min dimensions of saw-band 6300 x 38 x 1,3 mm sawing motor 4,0 kW Dimensions (LxWxH) 2420 x 3050 x 2150 mm total power requirement 6,5 kW Deljwhu E Rsimcanout weight of the machine ca. 2,9 t Additional information Used fully automatic band sawing machine Smallest cut-off length 6 mm Automatic feed length single 600 mm Feed length multiple 5400 mm Minimum offcut length single cut 75 mm Automatic operation 115 mm * Hydraulic saw blade tensioning * Infinitely variable cutting feed * Hydraulic material feed * Automatic feed with horizontal vice, hydraulic material clamping, infinitely variable * Coolant device * Chip conveyor * Roller-type conveyor, approx. 2500 x 500 mm

Condition: used, We offer used, steam-cleaned 40HC insulated containers from Bremerhaven or Berlin Depot. Original images! External dimensions: 12,192 x 2,438 x 2,896 mm Please provide us with your zip code so we can provide you with a free, non-binding quote for containers, including delivery and, if necessary, unloading from the truck. Dolimovygvaocanout We also offer sea containers of all common sizes and for every need. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! MAGITU GmbH

Condition: like new (used), Functionality: fully functional, mileage: 569,000 km, first registration: 04/2015, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, operation weight: 18,000 kg, maximum load weight: 7,700 kg, empty load weight: 10,300 kg, fuel: diesel, wheelbase: 6,100 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,550 mm, loading space length: 8,650 mm, loading space height: 2,700 mm, Year of construction: 2015, Equipment: ABS, air conditioning, car registration, cruise control, differential lock, onboard computer, parking heater, sleeping cabin, spoiler, tail-lift, Body Dimensions Djlimowifyzjcanjut 8.60m x 2.70m x 2.55m TAULINER BOX + 1,500kg DHOLLANDIA RETRACTABLE LIFT GATE. Extras Climate Controlled Air Conditioning, Automatic Transmission, 3-Position Engine Brake, 1 Bunk Bed, Heater, Night-Time Air Conditioning in the Roof, Rear View Camera, Rear Air Suspension, Cruise Control, CD Radio, Crash Control, Lane Control, On-Board Computer, Electric Lifts, Central Locking...

Condition: good (used), Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger Duslimcascgc Uyenst -Stuffing box: for Ø 50 mm shaft -for: gland tape -Number: 8x glands available -Price: per piece -Dimensions: 135/135/H145 mm -Weight: 2.6 kg

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar Dslimcaowhzmzjnsut weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: refurbished (used), Functionality: fully functional, Forklift battery with 1-year warranty 80V 4PZS 620AH - special trough REMA 320 A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L1,658 x W432 x H784 mm Weight: approx. 1,550 kg Capacity: min. 90-100% (C5 report included with delivery) Suitable for and more... Jungheinrich EKX 513 Toyota FBM20 Toyota FBMF16 Toyota FBMF25 Delijwii E Iomcanout Toyota/BT VCE 135 Bradshaw T20 Caterpillar EP20K Caterpillar EP20N Caterpillar EP25K Caterpillar EP25K PAC Caterpillar EP30CN Charlatte T135 Charlatte T135 EVO Combilift SL Daewoo B22/25 X-5 Daewoo B22/25 XL-7 Daewoo B25 X Daewoo B30 Daewoo B30 X-5 Daewoo B32 Daewoo B35 X Dimos EFY3004 Dimos EFY3504R Doosan B22X Doosan B22X-5 Doosan B25X-7 Doosan B30NS Doosan B30X Doosan B35NS Hubtex MD 30 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 60 Mitsubishi FB25 Mitsubishi FB25AN Mitsubishi FB25K PAC Nissan 1Q2L25Q Utiley UT3OPFE All common battery sizes available.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= Duelimewhuzxscanst 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Equipment: BIHLER P-CNC 400 Control system BIHLER Aucoustic cabine Delimcajvgfn Isnout Equipment front side: 1 slide feeding system right hand side 2 eccentricpresses 90 kN /each 2 wide slide units Equipment rear side: 1 cross feed system 1 RAZIOL band oiling system working range: wire diameter range: up to 4,0 mm stripmetal width: up to 60 mm stripmetal thickness: up to 4,0 mm feeding length: up to 120 mm outout: 5 - 350/min

Condition: used, Year of construction: 2014, x-axis 267,5 mm z-axis 600 mm control Heidenhain spindle tunring speed 4.000 U/min spindle passage 65 mm spindle bore 87 mm number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Duslimcajvy Ipzenst prior sale!

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 5,750 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Mast type: Triplex Technical condition: good Dslimswhg Hyecaneut Sideshift, 3rd valve, 4th valve, heating, full cab,

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors Djliewhzmnsmcanout - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: as good as new (ex-display), Functionality: fully functional, Forklift battery with a 1-year warranty 80V 3PZS 375AH REMA 320A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Year of delivery: 2024 Dimensions: L 982 x W 690 x H 583 mm Weight: approx. 980 kg Capacity: min. 90-100% (C5 protocol included with delivery) Suitable for the following models and more: Deljwii Dqoimcanjut Toyota FBM20 Hyster E2.2-3.5XN Hyster E200XM and others. All common battery sizes available, please inquire.

Condition: good (used), Year of construction: 1999, thermal exhaust air incineration plant, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -System: is currently still in operation and can be demonstrated -Protocols: regarding maintenance and emissions are available -Documentation: fully available -Combustion chamber temperature: 850° C -Heating medium: natural gas -Heating value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos Duelijvtzdlomcanjt

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° Dslsvdt Rxeimcanjut control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m

Condition: used, Functionality: fully functional, Year of construction: 2021, operating hours: 2,804 h, load capacity: 5,000 kg, lifting height: 4,520 mm, fuel type: diesel, mast type: standard, construction height: 2,380 mm, drive type: Diesel, Diesel Forklift Mast Type: Standard Condition: Ready for use and fully functional Technical Condition: Very good Sideshift, 3rd valve, heating, soot filter, full cab, air conditioning, Dolev T Ekpsimcanjut

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C Dujlimswhzmhjcanet 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty 80V 5PZS 775AH REMA 320A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L 2,020 x 430 x 900 mm Dslswiiz Ajimcanjut Weight: approx. 2,028 kg Capacity: min. 90-100% (C5 report included with delivery) Suitable for the following vehicles: Still MX-X Jungheinrich EFG 430 Jungheinrich EKX 515 Toyota FBMF30 Baumann EMS 65-70 Caterpillar EP25N Caterpillar EP30KPAC Caterpillar EP35KPAC Caterpillar FB30 PAK Caterpillar FB35K PAC Cesab 5 Daewoo B22/35 X-5 Daewoo B30 X Daewoo B30 X-5 Daewoo B30 X-7 Daewoo B30 X-RW Daewoo B30/32 Daewoo B35 X-7 Doosan B30X5 Doosan B35X-5 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 50 Hubtex MQ 60 Hyundai 30BH-9 Hyundai 30BHA-7 Hyundai 50B-9 Kalmar ECD 40-5 Kalmar EFY 50 Kalmar EFY 60 Mitsubishi FB25N Mitsubishi FB30 Mitsubishi FB30AN Mitsubishi FB30K PAC Mitsubishi FB35AN Nissan QX30 and more... All common battery sizes available.

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Rotary valve: 6 blades -Drive motor: Leroy Somer 1.1 kW -Gearbox: Leroy Somer i = 1:30 -Speed: 1420/47 rpm -Inlet opening: 245 x 230 mm -Outlet: Ø 90/55 mm -Transport dimensions: 850/670 / H560 mm -Weight: 132 kg Dujliohfufnsmcanst

Condition: new, Year of construction: 2024, CERTIFIED HIGH QUALITY FORKS All fastening classes available. FEM 1 FEM 2 FEM 3 FEM 4 FEM 5 Please inquire. Fork extensions are also available. Deleptb Uveimcanjut High quality material: Made of chrome manganese steel to guarantee high mechanical strength. Refined finish: Made on the basis of a rolled section In compliance with European ISO standards 2328 and 2330 Certified

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm Dujlimcjif Sbisanjt -Weight: 180 kg -Control: Two-point control using program control

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty 80V 5PZS 500AH REMA 320A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L1,027 x W852 x H742 mm Weight: approx. 1,550 kg Dslijwiiyljmcanjut Capacity: min. 90-100% (C5 certificate included with delivery) Suitable for the following models and more: Daewoo B30 X-5 All common battery sizes available

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty 80V 6PZS 750AH REMA 320A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: 1,026 x 996 x 627 mm Weight: approx. 1,690 kg Capacity: min. 90-100% (C5 report included with delivery) Suitable for the following models and more: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Dujlowiirboimcanot All common battery sizes available

Condition: refurbished (used), Functionality: fully functional, Forklift battery with a 1-year warranty Dueliewiiptomcanjt 80V 4PZS 620AH - special trough REMA 320 A connector installed - alternative connectors can be converted upon request Including Aquamatik for automatically filling the cells with distilled water Test date 2024 Dimensions: L1,640 x W435 x H982 mm Weight: approx. 1,580 kg Capacity: min. 90-100% (C5 certificate included with delivery) Suitable for and more... Dimos DM45 - Multi-directional Sideloader All common battery sizes available.