Condition: excellent (used), Year of construction: 2015, - Guide channel (oil-damped) - max. bar length: 3,200 mm - portable control panel - including guide channel Ø 80 mm Cob Hsr Eqhbsc Shbogt - steady rest (can be used as roller or jaw steady rest) - weight approx. 2,800 kg - Dimensions LxWxH 4,700 x 950 x 1,400 mm last mounted on DMG MORI NLX 2500/700

Condition: ready for operation (used), T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 740 mm Width: 550 mm Height: 540 mm Weight: 398 kg T-slot size: 50 x 20 mm Worktable size: Upper part: 660 x 550 mm Cgob Hcjv Il Eve Shbot Side part: 650 x 400 mm Worktable tiltable at 90˚

Condition: as good as new (ex-display), rotating bezel Ceb Hjf I Smzsc Shbjgt Make Bulmak type C 400 TS Height 160 mm Height from clamping surface to middle of steady rest. 160 mm maximum shaft diameter 110 mm weight 14 kg

Condition: good (used), Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg Csberhmnaj Hc Shbsgt

Condition: new, Year of construction: 2023, Rotary Table HV-6 for horizontal and vertical use Producer: VERTEX Type: HV-6 Year of Construction: 2023 Serial Number: - Direction of Use: horizontal, vertical Mounting Plate: Ø 150mm Centre Sleeve: MK2 through hole Flatness of Clamping Surface: ±0,015mm/100mm Parallelism of Clamping Surface to Ground: ±0,02mm/100mm True Running of Clamping Surface: ±0,015mm/100mm Workpiece Weight horizontally: max. 40 kg Workpiece Weight vertically: max. 20 kg Weight: 12,1 kg Scale Ring: 360° Quick clamping device: yes Gear: Worm gear ground, hardened & adjustable, 90:1 Cgeb Hc Shepr Utzobjt Location: Austria / Vienna Condition: new, originally packed Description: Simply viewed, a dividing head is a turntable on which a workpiece can be attached directly or using clamping aids. The plate can be rotated to any desired angle, either with a crank and scale ring or with high precision using a pin and a perforated disk (optional accessory). Application: Support Tool for the production of gears, belt wheels, perforated disks, ... Dimensions: See Illustration

Condition: excellent (used), Year of construction: 2017, Motor from Lammers Antriebstechnik 11kW, 1470/min Valves: HYDAC Pump 30 cm³/rev Tank 250 liters Pressure 100 bar max Ceb Hc Shjrm Nhljbsgt Oil HLP 46

Condition: ready for operation (used), T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Cgjb Hev Ilxijc Shbst Length: 1000 mm Width: 800 mm Height: 630 mm Weight: 854 kg T-slot size: 50 x 20 mm Table size: Upper part: 1000 x 800 mm Side part: 930 x 400 mm Worktable tiltable at 90˚

Condition: as good as new (ex-display), unused bezel Cgsbof Hmnbe Hc Shbjt Make Bulmak Maximum opening width 160 mm Height of clamping surface to spindle center 170 mm distance of mounting hole 360 mm clamping surface 410 x 70 mm Total height 490 mm Depth 460 mm Weight 26 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs Csb Hov Ai Ecoc Shbegt -Length: 3010 mm -Width: 1260 mm -Groove width: 21 mm -Dimensions: see drawing in the photos -Total dimensions: H295 mm -Weight: 2910 kg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz/ 60 Hz Filter area: 6.0 m² Conveying capacity: 1000 m³/h Cgeb Hc Ssvrg S Sohbet Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Condition: good (used), Storage trolley - Order picking trolley length 1045 mm width 700 mm Cgsbsglk Tys Hc Shbjt height 890 mm total Length 1150 mm

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 3015 mm -Width: 1240 mm Cjb Hcsv Ah Rwo Shbjgt -Groove width: 21 mm -Dimensions: see drawing in the photos -Total dimensions: H295 mm -Weight: 3420 kg

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Ceb Hjvrfv Ajc Shbogt Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Condition: excellent (used), Chuck Three-jaw chuck Make: Forkhardt Type F 315 Diameter 315 mm with short taper holder KK 11 Cone diameter 196.88 mm 6 stud bolts M 20 Bolt circle diameter 235 mm Through hole 86 mm Stock number (28597) Csb Hc Shsv Ava Hebjgt

Condition: good (used), drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, drawer cabinet -Tool cabinet. Drawer cabinet, sturdy design with base frame -11 drawers: division/height see photos -Dimensions: WTH 780/780/H1250 mm Cgob Hcjv Afhms Shbst -Weight: 207 kg

Condition: excellent (used), Year of construction: 2008, Mechanical filter Air volume: 2000 m³/h appliance extraction capacity Color: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Cjbsu Sqtko Hc Shbjgt Weight: approx. 50 kg

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... 4 pieces Cgebjv Ad Eqo Hc Shbst -Delivery/Price: complete -Dimensions each: 150/50/H130 mm -Weight: 3.9 kg/piece

Condition: good (used), Outer-Ø: 310 mm Drill hole: 115 mm Csb Heff Ebtsc Shbjgt chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt distance 120 mm Bolt D 27 mm- M16 new square safety key

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm Cjb Hcjv Adi Ae Shbogt -Weight: 8,8 kg

Condition: used, The chip conveyor is a single conveyor, it is used to continuously and reliably convey short broken metal chips from the working area of the machine tool into a collecting container and at the same time to separate the metal chips from the cooling lubricant. This ensures more efficient production processes, improved dimensional accuracy of the workpieces and a longer shelf life of the coolant. The chip conveyor consists of a metal housing with a central chain strand and drivers. It is driven by a 230 V three-phase geared motor which can be connected to your machine tool by means of a plug. Oil return guide Cgeb Hjclu H Uec Shbot

Condition: good (used), marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block Cgjb Hcev Ac Uke Shbot -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/75/H130 mm -Weight: 4.8 kg

Condition: good (used), Year of construction: 1998, - Guide channel (oil-damped) - max. rod length: 3,200 mm - including guide channel Ø 26 mm - Dimensions LxWxH 4,700 x 900 x 1,400 mm last mounted on Ergomat TDA 26 Cob Hotu Iqxoc Shbegt

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Csb Hc Shsp Du Alsbegt Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Year of construction: 2018, Condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A Cgeb Hc Shjg Ipn Tsbjt - protection class: IP54 - noise: 70 dB

Condition: good (used), Year of construction: 1990, - For connection to multi-spindle automatic lathes - Storage: surface magazine 4x 450 mm support - Bar Ø: 4-52 mm (depending on guide channel) - Ø guide channel: 44 mm - bar length: approx. 3000-4200 mm - dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg Cgsbjihhz Re Hc Shbjt