Used briquetting presses for sale (105)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale: Iedpfx Agsx Ap Ruezetr RUF briquette packaging line, built in 2017 by Koch Robotersisteme. The system can be connected to up to 9 RUF R600 briquetting machines. Packaging capacity: 4.5–5 t/h. Current price is approx. €400,000, which is 50% of the new value without briquetting presses. RUF briquetting machines are listed in a separate auction.

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h Itsdpfx Aev T Uphegzsr – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: new, Year of construction: 2025, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Itodpfx Agod Nm Siszsr Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: ready for operation (used), Year of construction: 1996, Used Comafer 50/40 briquetting press. The briquetting press has undergone a complete overhaul. Ijdpfx Agjxzu Rdszjtr

Condition: as good as new (ex-display), Year of construction: 2010, Capacity 180 - 300 kg/h Diameter of the briquets 50 mm Isdpfx Aexy S E Negzjtr 0,3 m³ lubrication pump 1,0 kW engine output 15 kW

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Hopper diameter: 1100 mm Hopper height: 910 mm Itsdpfx Ajxzqmzsgzer Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 23,666 h, functionality: fully functional, RUF Lignum R6 briquetting press Year of manufacture: 08/2019 Operating hours: 23,000 hrs Price: 49,000.00 EURO + VAT We have 7 RUF briquetting presses for sale: Lignum R6 2019, 23,000 operating hours, net price: 49,000 euro Lignum R6 2019, 23,000 operating hours, net price: 49,000 euro Ijdpfx Ajx Ap Iyegzetr Lignum R6 2019, 6,800 operating hours, net price: 59,000 euro Lignum R4 2021, 13,000 operating hours, net price: 59,000 euro Lignum R4 2021, 13,000 operating hours, net price: 59,000 euro Lignum R4 2021, 12,000 operating hours, net price: 59,000 euro Lignum R4 2021, 12,000 operating hours, net price: 59,000 euro An automatic briquette packaging system is offered in a separate listing.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Iedoxyi Ihspfx Agzetr Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Service tools

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm Itedpfxjgl Nlms Agzor - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2009, operating hours: 37,500 h, functionality: fully functional, machine/vehicle number: 1653, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper Itsdexxk D Uspfx Agzor - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is intended for compressing secondary raw materials into briquettes (briquette shape: rectangular). Technical specifications of the press: Dimensions: Length: 1800 mm (2100 mm for transport) Width: 1800 mm (2000 mm for transport) Height: 1900 mm (2200 mm for transport) Net weight: 2945 kg Power supply: 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: 450 kg/h (+/-50 kg depending on raw material type and fraction) Noise level: A-weighted sound pressure level at operator’s station: 77.8 dB +/-5 dB Compression pressure: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Pressure: Max. 300 bar Raw material moisture content: No more than 14% Briquette dimensions: Width: 150 mm Thickness: 60 mm Length: 40-105 mm Permissible ambient temperature for operation: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system – controls the hydraulic press system. There are four electric motors: the first (30 kW) drives the main hydraulic pumps, the second (1.1 kW) powers the cooling hydraulic pump, the third (0.55 kW) drives the cooling fan of the oil system, and the fourth (1.5 kW) drives the sawdust feed screw. The operation of the motors and hydraulic valves is managed via contactors and intermediate solid-state relays by a microprocessor with expansion modules. For visualization and parameter adjustment, a liquid crystal display with buttons is provided. Hydraulic system – manages the operation of hydraulic cylinders using pumps, high- and low-pressure valves, solenoid valves, and hoses. There are three hydraulic cylinders: the first is the main cylinder for compressing sawdust, the second is a vertical cylinder for initial sawdust compaction, and the third is a forming cylinder for moving the briquette form. Also installed are an oil cooling system with a pump and air cooler. Oil filtration is performed by the main high-capacity filter, a filter for the cooling system, and a fine filtering unit. Iodpfx Asxmav Negzetr Feeding of raw material into the press is performed by an integrated loading hopper. The raw material in the hopper is mixed intermittently to prevent bridging. The mixer is driven by a chain from the auger gearmotor. The auger cyclically feeds the material to the shaft of the vertical cylinder. The hopper is equipped with two level sensors – lower and upper. When the hopper is enlarged, the sensors can be repositioned as needed. Control – dual-mode, manual and automatic, is provided. All control equipment is mounted in the electrical cabinet. Automatic control constitutes the normal press operation without operator intervention. Manual control is used for press setup, troubleshooting, returning the cylinders to their home positions, or in emergency situations. Operation is facilitated by a display located on the cabinet door. It allows for viewing and adjustment of input parameters, as well as real-time monitoring of press status and error messages.

Condition: used, Technical data: Briquette diameter: 70 mm Briquette length: 70 mm Hopper diameter: 1200 mm Hopper height: 1000 mm Hopper capacity: 1.13 m³ Itjdpoxxxawjfx Agzsr Throughput: 70–120 kg/h Power supply: 400 V Motor power: 11 kW Safety switch

Condition: excellent (used), Year of construction: 2018, operating hours: 872 h, functionality: fully functional, machine/vehicle number: 910-2265, total width: 1,350 mm, total height: 1,410 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 750 kg, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, oil tank capacity: 100 l, pressure: 160 bar, power: 5.5 kW (7.48 HP), filling opening length: 1,044 mm, filling opening width: 1,044 mm, Briquette diameter (mm): 60 Hydraulic motor (kW): 5.5 Permanent agitator (kW): 0.5 Screw conveyor motor (kW): 0.6 Oil capacity (approx. l): 100 Weight (approx. kg): 750 kg Iodpfxjxwm Utj Agzetr

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 2,000 mm, total height: 1,800 mm, total length: 5,500 mm, overall weight: 6,500 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Stetson Ross 6-12-C1 Planer/Moulder Reliable Stetson Ross 6-12-C1 woodworking machine for sale. Robust industrial design, built for intensive operation. Ideal for planing, profiling, and processing boards, logs, and surfaces in large quantities. The machine runs smoothly, has been regularly maintained, and is ready for immediate use. Equipment overview: Model: Stetson Ross 6-12-C1 Iedexvn Tbjpfx Agzotr Application: wood planing / profiling Solid industrial construction Smooth operation and high processing quality

Condition: new, Year of construction: 2025, operating hours: 8 h, One machine - ready produced Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Itodpfxsxfwds Agzer Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2013, operating hours: 37,400 h, functionality: fully functional, machine/vehicle number: 2110, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1 Iodpfx Asxwiziogzetr  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Refurbished machine suitable for smaller, single-shift carpentry operations. It offers a robust construction while providing solid performance. Maximum briquette output: 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service available directly from our company. Professional PRODECO hydraulic briquetting presses are ideal for small and medium-sized woodworking operations. They enable efficient processing of waste into environmentally clean, high-calorific fuel without the need for binders. These machines are characterized by compact space requirements, low energy consumption, and easy operation. Technical specifications: - Motor power: 5.5 kW - Briquette output: 35 to 70 kg/h (depending on material) - Briquette diameter: 60 mm - Briquette stroke length up to 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: Itjdpfx Agjvva Rpozer - Hydraulic unit with 7 pressing cycles/min - Dual manometer for improved pressure monitoring - Level sensor for the height of briquetted material - Oil level sensor - Inspection window - CE safety standard compliant - Moisture content of processed material must not exceed 18% The machine is refurbished, calibrated, and tested.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Still well-preserved briquette press with top-mounted filter for indoor use (no sheet metal cladding). Filter inspected according to BIA standards. Hydraulic motor 7.5 kW. Extraction pipes can also be supplied. Itjdpfxexuzp He Agzjr

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Itjdpfx Agsw Hpizozjr Optional: Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Ijdpfxefmqq Ej Agzstr Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Itsdoffh Atspfx Agzor Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Itodpe E Dqujfx Agzjr Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: Itjdpfefhql Tsx Agzjr - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: as good as new (ex-display), Year of construction: 2024, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Iodpfx Ajd Nnwlogzjtr Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1675 hrs). Motor: 11 kW. Throughput up to a maximum of 220 kg/h. Briquettes: 150x60 mm. Itsdpfxewcc D Rj Agzer Press dimensions: approx. 2200x3000x1920 mm (LxWxH). Control cabinet dimensions: 500x1250x2120 mm (LxWxH). Weight approx. 3000 kg.