Used eccentric presses single column 55-99t for sale (123)

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Kjdpouqcxnsfx Agzofa Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: used, Year of construction: 1988, stroke 16-140 mm pressure 75 t Kfsdpfxox H Txys Agzja weight 4,6 t

Condition: used, total height: 1,850 mm, total width: 1,750 mm, total length: 750 mm, Empty weight: 2.000 kg Price: On request Kraftformer - Powerformer 6mm Steel - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 3.0kW - Throat depth: 600mm - Min. stroke: 8mm - Model: Eccentric - Height adjustment: 80mm - Transport dimensions: 750mm x 1750mm x 1850mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kfjdpfxjx Ek R Dj Agzsa Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 4868, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 Kfsdpew T S Tzsfx Agzja TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 58200 € 1099.98 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm Ksdpfx Agswiq I Dezsfa 1500 mm 2750 mm 5700 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: excellent (used), Rijva EP 180 180 tons 50 strokes/min. Adjustment 28 - 140 mm Weight 12,000 kg Kfsdpfxjx Ic Ume Agzja

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm Kfjdjvzxttepfx Agzsa table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

Condition: good (used), Year of construction: 2016, machine/vehicle number: 161138, Offer 25457 Technical Data: - Press force: 60 t - Throat depth: 250 mm - Table size approx.: 700 x 500 mm - Drop-through hole in table: 180 mm - Max. distance table – slide plate: 360 mm - Pin hole in slide: 45 mm - Slide adjustability: 60 mm - Stroke adjustment: 10 - 100 mm - Max. stroke rate: 65 strokes/min - Pneumatic connection - Drive: 400 V / 5.5 kW - Space requirement approx.: W 1200 x H 2400 x D 1500 mm - Weight approx.: 3500 kg - With: pneumatically operated clutch - Mechanical overload protection - Light barrier Kfjdpfx Asx I Iqyogzoa - Central lubrication - Two-hand control desk with foot switch

Condition: used, Year of construction: 1989, total height: 2,750 mm, total width: 1,700 mm, total length: 1,600 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No Kedpfox Dkfpox Agzsfa - Serial number: 4414 - Control: Conventional - Motor power: 5.5kW - Table width: 560mm - Table length: 800mm - Ram width: 300mm - Ram length: 450mm - Min. stroke: 8mm - Model: Eccentric - Max. stroke: 100mm - Number of columns: 1 - Power: 63.0ton - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Strokes per minute (idle): 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Die installation height at maximum stroke, bottom dead center, and ram fully raised: 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Kedpfx Agjw Rbxzszjfa Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control with redundant design and self-diagnosis, featuring plain text status and error display Infinitely variable stroke rate in the range of 10 ... 60 strokes/minute via ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with die management and die protection, with color touchscreen visualization, SIEMENS PLC S7-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke adjustment / ram adjustment Rigidly welded tie rods, clear distance between tie rods: 1,345 mm Swiveling main control console Non-contact safety guard – BWS brand LUMIFLEX, mounted at the front of the machine table or die area, installed on the tie rods

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm Kodpfeu Nfg Hex Agzsfa clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial number: 54203/05G Year of manufacture: 1999 Pressing force: 1,000 kN Stroke adjustment: 8 - 140 mm Ram strokes: 50 – 180 strokes/minute Location: 41751 Viersen, Germany Condition: Used, functional Price: €36,974 net / €44,000 gross You are welcome to submit a price offer. Reasonable counteroffers will be considered. When making inquiries, please include your complete contact details. Additional photos available upon request. You are also welcome to view the machine on site. Simply call us to schedule an appointment. This item is being sold as part of insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. Sale is made without any warranty. Kfodpfxox Ea Shj Agzea Liability, reduction, and rescission are expressly excluded. We recommend inspection prior to purchase, as the item is sold as seen. All information provided is without guarantee. Subject to errors and prior sale. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of any liability for visible and hidden defects, in particular technical, qualitative, or performance-related defects and usability. Due to time constraints, only serious inquiries and reasonable offers will be answered! This is solely an advertisement for informational purposes. Inspection by appointment only! Best regards

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm Kodpfx Agsvuk Snezjfa ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT electrical cabinet / WITHOUT additional work The putting into operation in our warehouse (with new control) / Safety adaptations / mechanical overhaul can be offered additionally on request

Condition: good (used), Weingarten Eccentric Press AV10 - with gripper feed Kfedpfjx Emvvsx Agzsa - uncoiler and recoiler - During pressing, the speed can be adjusted via frequency converter - Pressing force: 10 t - Strokes per minute: 160 - Ram stroke: 6-60 mm - Ram adjustment: 40 mm Good condition, fully functional, can be inspected and tested under power on site. Shipping also possible abroad. Inspection: I would like to point out that, to avoid misunderstandings, the item can be viewed and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. Should you have any general questions or wish to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping by freight company.

Condition: used, Year of construction: 1963, total height: 2,880 mm, total width: 1,500 mm, total length: 2,300 mm, Empty weight: 8.000 kg Price: On request - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Control: Conventional Kfjdpfx Agewmfrrszja - Motor power: 7.5kW - Table width: 650mm - Table length: 950mm - Ram width: 340mm - Ram length: 550mm - Min. stroke: 25mm - Model: Eccentric - Max. stroke: 118mm - Height adjustment: 75mm - Power: 160.0ton - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: defective spare-parts repository (used), Year of construction: 1974, functionality: not functional, machine/vehicle number: 121645, table height: 910 mm, table width: 650 mm, stroke adjustment: 63 mm, overall weight: 4,000 kg, pressing force: 63 t, space requirement length: 1,200 mm, space requirement width: 1,900 mm, space requirement height: 2,800 mm, The eccentric press has a clutch defect and is currently non-operational. Ksdox D Tngjpfx Agzsfa Without the column stand mounted in the pictures.

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW Kfjdpfsfn Aqnox Agzja weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 - installation of moving screen 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) Kedpfx Aovuk Rkjgzsfa with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation as is where is, WITHOUT putting into operation / WITHOUT additional work The putting into operation in our warehouse / Safety adaptations / mechanical overhaul / new electrical control can be offered additionally on request

Condition: used, Year of construction: 1989, total height: 2,900 mm, total width: 1,800 mm, total length: 2,000 mm, Empty weight: 5.600 kg Price: On request - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 122692 - Motor power: 7.0kW - Table width: 630mm - Throat depth: 140mm - Table length: 900mm - Ram width: 360mm - Ram length: 550mm - Min. stroke: 10mm - Model: Eccentric - Max. stroke: 100mm - Number of columns: 1 - Height adjustment: 63mm - Power: 63.0ton - Transport dimensions: 2000mm x 1800mm x 2900mm (l x w x h) Kfedpfsw Hzvmex Agzja - Transport weight [kg]: 5600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm Kjdpfx Agevuk Rwszjfa table height over floor 740 mm table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: used, Year of construction: 1981, total height: 2,300 mm, total width: 1,100 mm, total length: 2,000 mm, Empty weight: 500 kg Price: On request - Year: 1981 - Documentation available: No - CE certificate present: No - Table width: 505mm - Throat depth: 250mm - Table length: 710mm - Ram width: 280mm - Ram length: 450mm - Power: 63.0ton - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ksdpfxoxhcgye Agzefa Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1985, Pressure 080 t throat 345 mm stroke 20 - 160 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 495 mm table surface area 920 x 610 mm table height over floor 800 mm Hole in the table 280 mm passage to the back 670 mm ram surface 650 x 400 mm ram adjustment 50 mm Kfsdpfovuug Nox Agzea power capacity 10,0 kW weight 7,7 t Dimensions (WxDxH) 1,5 x 2,2 x 3,15 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, hydraulic overload protection in ram, manual stroke adjustment, motoric ram adjustment, motoric centralized lubrication, two-hand operation Press is at the moment being overhauled electrically and mechanically - video is from before starting the overhaul WITH mechanical partly overhaul, WITH new electrical control Pilz

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Hole in the table 280 / 315 mm Table height above floor 800 mm Kodpfxjvuua Ae Agzjfa Passage to the back 500 mm Ram surface 650 x 400 mm Ram adjustment 70 mm Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1978, pressure 063 t throat 450 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 720 x 800 mm hole in the table 280/250 mm table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,7 t Kfjdpsvzxn Defx Agzja dimensions (WxDxH) 1,3 x 2,0 x 2,65 m year of manufacture 1966 - modernized 1978 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram as is where is, partly dismantled, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm stroke 16 - 90 mm Kodpfx Asvut T Ujgzsfa no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch (Ortlinghaus), manual stroke adjustment, manual ram adjustment, fix table as is where is, WITHOUT putting into operation