Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Cgsb Hhoifnxxot Riot Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: excellent (used), Year of construction: 1999, Running direction of the panel : from operator to left max. glue thickness : 5 mm min. Workpiece thickness : 10 mm min. Workpiece width : 90 mm feed speed : 10 m/min Heating time : 5 min Automatic roll magazine : Yes cross-cut shears up to : 0.2 - 3.0 mm autom. gluing : glue pot with granulate on top cross-cut saw : rigid 90 Combination trimming unit : Yes unit display : display type of control : manual Operation : Selector switch/push buttons Protective hood : Yes Chassis : yes Dimensions : 2800 x 1400 x 1400 mm Weight approx. : 550 kg Coberutcys Hht Riogt Location : Comes to stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Functionality: limited functionality, We are selling used solid wood edge banding machine Holzher 1356. - External dimensions: 275 x 90 x 126 cm - For solid wood laminates up to 20 mm Cjb Hhtev Nqw He Rijgt - Gluing unit, pressing unit, planing unit, without trimming

Condition: repair required (used), Year of construction: 1996, machine/vehicle number: 0-201-23-1725, Dear Sir or Madam, Cob Hht Rev H Azfjiegt We are selling our CNC machine from 1996. The machine was able to mill and edge form plates but it had not been used for a long time (approx. 3-5 years) because it had problems with precise form cutting and edging. The information contained herein is written to the best of our knowledge and belief. This machine is a used machine. Any problems after purchase are not covered by the guarantee. Kind regards

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit Ceb Hhjv H D S Sjt Riogt profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: good (used), Year of construction: 2013, Brandt Highflex 1650 with RETURN PUR - AIRTEC Rolls 0.4 - 3 mm edge thickness Strips 0.4-15 mm (12 mm) edge thickness Workpiece thickness 8-60 mm Joining unit OVERVIEW OF THE UNIT EQUIPMENT : JOINING UNIT 2 X 2.2 KW 2OO HZ GLUING UNIT A12 SNIPPING UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT FOR BEVEL/STRAIGHT CROSS-CUTS PNEUMATIC 2-POINT ADJUSTMENT FOR CROSS-CUTS PRE-MILLING UNIT 2 X 0.55 KW O DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTIONAL SHAPING UNIT 2 X O, 4 KW PROFILE SCRAPER W]ITH QUICK-CHANGE HEADS Cgsb Hevaw Uajht Riet PNEUMATIC ADJUSTMENT SCRAPER BLADE GLUE JOINT SCRAPER BUFFING UNIT Feed rate 8-18 m / min with form cutter 14 m/ min Total length 5760 mm Roll material 0.3-3 mm Strips 3-15 mm (When using the VKNR 4845 exchange trimming units the max. edge thickness is 12 mm) GLUING UNIT A12 WORKPIECE PREHEATING QUI CK MELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return BOOMERRANG TFU 140/ R 20 Year of construction 2016 according to illustration available from April / June 2025 All data was taken from the data sheet, therefore without guarantee Technical data on request

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Cjb Hhjtt Dqpjt Risgt Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm Cgebec S Di Re Hht Rijt brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: good (used), Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW Cgebsvpf Uto Hht Rijt -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Condition: excellent (used), Year of construction: 2011, • Feed Speed 8-18m/min • Workpiece Thickness 8-60mm • Edge Coil 0.4-3mm • Edge Strip 0.4-15mm • Pre-Milling 2X2.2kw • Pre-Heating Unit • Quickmelt Application Unit • Quickmelt Pre-Melter • Pressure Zone with motor driven adjustment • End Trim Unit • Pneumatic adjustment End Trimming Chamfer / Straight • Pneumatic 2 Point Adjustment End Trimming • Rough Trimming Unit 2X0.55Kw • Pneumatic adjustment Trimming Unit • Pneumatic 2 Point Adjustment Flush or Overhang • Trimming Unit 2X0.55Kw Synchronism • Pneumatic 2 point adjustment • Program adjustment – Lateral sensing • Program adjustment to edge thickness • Multifunctional Contour Trimming Unit 2X0.35Kw • Profiule Scraping unit – Quick Change heads • Pneumatic adjustment profile scraping unit • Glue Joint Scraping Unit • Buffing Unit • PC 20 • Optimised Workpiece Gaps • V-Belt Top Pressure Belt • Separating Agent Spray Device Csb Hjph Uk Esht Riogt • Detergent Spraying Unit • Automatic Edge Infeed Device • Multiple Roller Sensing Fine Trimming Unit • Multiple Roller Sensing Rough Trimming Unit • Special Sensing for Scraping Unit • Interface for Ligmatech ZHR05 Return System not included.

Condition: good (used), Robland 575 edge bander pre-milling glue application pneumatic pre-guillotine pressure rollers finished cutting saws top-bottom milling unit R1 – R2 flat scraper machine length with plate 250cm feed 5.5m/min max. edge thickness 2mm Csb Hht Rov Hb Ikoisgt total demand power 6.8KW, machine in good condition, works flawlessly. Possibility to check before purchase

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) Cgsb Hhjl Hydmjt Riot No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: new, Year of construction: 2023, GENERAL A complete and versatile edge banding machine for small and medium sized companies that can carry out a wide range of processing operations to a high quality standard in a small space. The SCM olympic 500 is available with both pneumatic and electronic unit adjustment and enables the processing of 2 radii, each with its own tool for workpieces with a minimum width of 60 mm. HIGHLIGHTS - quick and easy change of EVA and PU glue thanks to SGP-E glue pot - 2 radius processing on all units with multiedge tool - large touch-screen control panel with 'Maestro Active Edge' surface OPTIONS INCLUDED Interior lighting of the cabin and the gluing area NESTING sensing rollers 3 x release agent spraying unit Glue container' SPG-E (quick change color/glue type) 1.5 kg Edge preheating with infrared radiation K2-Radius snipping unit incl. automatic positioning for (straight, chamfer and radius snipping) Chamfer and radius trimming unit R-HP incl. automatic pos. for e.g. chamfer trimming thin edges or flush trimming solid edges ROUND 2-A rounding unit for processing 1 radius and 1 thin edge Radius scraper unit RAS-A Cgob Hheq A Tyzet Rist Surface scraper unit RC-N TECHNICAL DATA Edge thickness 0.4 - 6 mm panel thickness 8 - 60 mm min. panel width 60 mm Feed speed 12 m/min Machine length approx. 4700 mm

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Cgeb Hht Recr T N Deiet Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone + Edge coils supporting unit (No. 2+1 reels) Trimming unit 08.055.0.1680 (Kw 1,85 x 1) to rough upper edge protrusions (max mm 14) Snipping (end-cutting) unit 08.42/30/B (Kw 0,2 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi Function Unit (Profile contour Trimming unit) KFA 20 (Kw 0,5 x 1) max 25 m/min Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.521 Cgsb Hskw T D Soht Riot Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Milling grooving unit 08.190 (1 x Kw 4,5) CNC (90° / 180° / 270°) CNC

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device (from lengthwise to crosswise) with double cone system Cob Hht Rshmkxqsiegt J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins "Hopper Feeder" (panels fall directly onto the feeding chains) Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Cgsb Hht Roum Untsijt Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Fine Trimming unit 08.055 (2 x Kw 0,66) 30 m/min Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18) Free space

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) Cjb Hhjttgy Het Rijgt G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side machine) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Panels thickness (min/max) mm 10 - 60 Numerical Control PC with Sintra Software Safety and sound-proof enclosures/cabins Spraying unit (Anti-sticking liquid) Cgjb Hshyg R Hsht Riet Panels in-feed system Milling Unit (vertical Joint Trimmers) RT Glueing Unit (P.U.R. Glue + Quick Melt unit) Glueing Unit (Thermofusion with hot air) AirForce System Edge coils supporting unit (N. 24 reels) Snipping (end-cutting) unit IT Rough Trimming unit Duo System (?) Fine Trimming unit RF Fine Trimming unit (Multi-profile, by N.C.) RF a CN Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) AR Profile edge scraping unit (Multi-profile, adjustable by N.C.) Glue scraping unit Buffing unit Milling grooving unit EB (tool changer with 5-place magazine) Hot Air Heater (to reactivate the color of plastic tape)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Cjb Hjk Nk R Doht Riegt Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Profile Scraping unit + Glue scraping unit + Buffing unit

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Cgsb Hht Rjlikydoiot Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180° Cgeb Hheunrwnot Riet

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Cgsb Hed Nt Rqsht Riot Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: refurbished (used), SINGLE SIDE EDGE BANDER (Left) Cgsb Hhsdfgfpet Riot Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3,0 - 12,0 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Feeding speed (fixed) m/min 16 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x kW 3,0) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Fine Trimming unit 08.055 (2 x kW 1) - 30° Multi Function Unit (Profile contour Trimming unit) 08.346 (2 x kW 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 (2 x kW 0,25) Free space

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Cobodh Tfgo Hht Rijgt Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space