Condition: good (used), Year of construction: 2013, Brandt Highflex 1650 with RETURN PUR - AIRTEC Rolls 0.4 - 3 mm edge thickness Strips 0.4-15 mm (12 mm) edge thickness Workpiece thickness 8-60 mm Joining unit OVERVIEW OF THE UNIT EQUIPMENT : JOINING UNIT 2 X 2.2 KW 2OO HZ Delsvaw Uasn Ucv Neut GLUING UNIT A12 SNIPPING UNIT CHAMFER/STRAIGHT 2 X 0.35 KW PNEUMATIC ADJUSTMENT FOR BEVEL/STRAIGHT CROSS-CUTS PNEUMATIC 2-POINT ADJUSTMENT FOR CROSS-CUTS PRE-MILLING UNIT 2 X 0.55 KW O DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTIONAL SHAPING UNIT 2 X O, 4 KW PROFILE SCRAPER W]ITH QUICK-CHANGE HEADS PNEUMATIC ADJUSTMENT SCRAPER BLADE GLUE JOINT SCRAPER BUFFING UNIT Feed rate 8-18 m / min with form cutter 14 m/ min Total length 5760 mm Roll material 0.3-3 mm Strips 3-15 mm (When using the VKNR 4845 exchange trimming units the max. edge thickness is 12 mm) GLUING UNIT A12 WORKPIECE PREHEATING QUI CK MELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return BOOMERRANG TFU 140/ R 20 Year of construction 2016 according to illustration available from April / June 2025 All data was taken from the data sheet, therefore without guarantee Technical data on request

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit Dslnjv H D S Se Ucv Neut profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Deln Ujc S Di Rocv Nsut Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: good (used), Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, Djln Ucovpf Utjv Njut -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Condition: used, Year of construction: 2008, machine/vehicle number: AA/H113802, SECOND-HAND EDGE BANDER MACHINE SCM MOD. OLIMPIC 500K "T-E" - (CE) - Pre milling unit - Gluing unit with pre-melter - End trimming unit with double blade - Trimming unit - Edge scraping unit - Glue scraping unit Dolor Iynbjn Ucv Njut - Brushing unit - Year 2008 (CE)

Year of construction: 1992, Condition: good (used), Functionality: fully functional, SWISS KRONO Kft. offers the Homag FL86 N+F line, Delnsrxuc Aj Ucv Njut As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 288, I am selling a Cehisa SYSTEM 4 edge bander, manufactured in 2006, first owner. Excellent condition. Technical parameters in the attachment. Deln Ucvsv Hc Dgj Neut

Condition: good (used), Robland 575 edge bander pre-milling glue application pneumatic pre-guillotine pressure rollers finished cutting saws top-bottom milling unit R1 – R2 flat scraper machine length with plate 250cm Delsv Hb Iken Ucv Nout feed 5.5m/min max. edge thickness 2mm total demand power 6.8KW, machine in good condition, works flawlessly. Possibility to check before purchase

Condition: new, Year of construction: 2023, GENERAL A complete and versatile edge banding machine for small and medium sized companies that can carry out a wide range of processing operations to a high quality standard in a small space. The SCM olympic 500 is available with both pneumatic and electronic unit adjustment and enables the processing of 2 radii, each with its own tool for workpieces with a minimum width of 60 mm. HIGHLIGHTS - quick and easy change of EVA and PU glue thanks to SGP-E glue pot - 2 radius processing on all units with multiedge tool - large touch-screen control panel with 'Maestro Active Edge' surface OPTIONS INCLUDED Interior lighting of the cabin and the gluing area NESTING sensing rollers 3 x release agent spraying unit Glue container' SPG-E (quick change color/glue type) 1.5 kg Edge preheating with infrared radiation K2-Radius snipping unit incl. automatic positioning for (straight, chamfer and radius snipping) Chamfer and radius trimming unit R-HP incl. automatic pos. for e.g. chamfer trimming thin edges or flush trimming solid edges ROUND 2-A rounding unit for processing 1 radius and 1 thin edge Radius scraper unit RAS-A Surface scraper unit RC-N Dujloq A Tyzjn Ucv Njt TECHNICAL DATA Edge thickness 0.4 - 6 mm panel thickness 8 - 60 mm min. panel width 60 mm Feed speed 12 m/min Machine length approx. 4700 mm

Year of construction: 1990, Condition: used, edge heights: 10 - 60 mm edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW Dujln Ucvj T T Ddo Njt space needed: 2900 x 870 x 1320 mm weight: 780 kg

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) Dsln Ucjiztxysv Nout MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Djlnou Hldme Ucv Njut Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: reconditioned (used), Year of construction: 2014, Advantage 400 single-sided edge banding machine Equipment: - Working length 6700 mm -divider top and bottom - jointing unit 08.380 - Radiator 300 long, 2 x 1.5 kW for preheating the workpiece edge - gluing unit 283.1516 toothed belt drive - Strip control to prevent incorrect gluing. - Rotary capping unit for workpiece leading and trailing edges - Space reserve for lubricant spraying at high-gloss edge - Milling unit 08.0561 - Copy milling unit SKF-L - Profile scraper unit 08.519 - Spray nozzles at top and bottom for application of cleaning agents - Self-feeding scraper unit 08.521 - Buffing unit 08.617-2 - Interior lighting - Electronic height adjustment of top pressure (one-sided) Technical data "workpiece - Workpiece length min.: 150 mm - Workpiece width min.: 65*/ 150 mm (*with max. workpiece thickness of 25 mm) - Workpiece thickness min.: 8 / 12* mm (*with profile scraper) - max. workpiece thickness: 60 mm - Smallest workpiece: 65x380 / 150x380 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm* (*observe max. cutting cross section) - workpiece shape: rectangular - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, foil, veneer - Laterally protruding coating material: 0 mm Technical data "Edge material Roll material without foil*: - Paper edges & plastic edges: 0.3 - 3.0 mm (*foil only with additional equipment) - veneer edges: 0.5 - 3.0 mm Edge cross-section for veneer max.: 150 mm² Edge cross-section for plastic edge max.: 180 mm² Cut-to-length edge strips: strips 3.0 - 12.0 mm Strip cross-section max.: 600 mm² Edge height min.: 12 mm Edge height max.: 65 mm Upper edge protrusion max.: 2 mm Edge profiles: - Paper edge approx. 0.4 mm (chamfer 15°) - Plastic edge up to 3.0 mm (radius depending on tool) - strip up to 12 mm (flush milling) Technical data "machine working length 6700 mm Feed speed 20 m/min for Advantage 400 Constant workpiece protrusion from the chain track: 35 mm + Edge thickness max. cross section: 520 mm² Throughfeed width min. (with 35 mm projection): 65 mm Workpiece length in feed direction min.: 150 mm basic height (upper edge of chain track): 900 mm Unit side: In feed direction left Control voltage: 24 V DC / 230 V AC Delnsitu Eaj Ucv Njut Mains voltage: 3/N/PE, 400/230 V, 50 Hz, +/-5% (FI protection circuit not applicable) Machine control ICOS Expert Features: - PC-based control system with integrated PLC and electronic draw frame control - Simple, machining-related program creation - Navigation and operation via touch screen - Program memory for max. 1000 programs - Program number 3-digit numeric - Control system prepared for service portal Technical data control system:* - Panel PC with integrated 15" TFT display, with touch screen - USB connection - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 in the switchboard - Operating system: Windows with TwinCat system for real-time control Note: The technical data and descriptions are a copy of the order confirmation at that time. Data are for information only and are not binding. Condition: - Machine completely overhauled - upper pressure belt new - Feed chain new - Feeler wheels and tools of finishing new

Condition: new, Year of construction: 2025, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Duelnjd Dczzs Ucv Njt Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us.

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Duelnevu Tkge Ucv Not Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: good (used), Machine nr: 306/ F Planing boards 45mm Duoln Ucvshcz S De Nst types: FKF G-6

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 16 - 30 (ca.) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.1518 Band Pressure zone + Edge coils supporting unit (No 1 reel) Dueln Ucvjvtx R No Nst Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Trimming unit 08.055.0.1680 (Kw 1,85 x 1) to rough upper edge protrusions (max mm 14) Fine Trimming unit 08.0587 (Kw 1.0 x 2) Multi Profile - 4 profiles Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 20 (Kw ? x 1) 20 m/min Profile Scraping unit (Multi-profile, by N.C.) 08.516 (4 profiles) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Free Space (To add a milling grooving unit)

Condition: good (used), Year of construction: 2008, Functionality: fully functional, feed rate X-axis: 20 m/min, edge thickness (max.): 12 mm, product height (max.): 60 mm, TECHNICAL DETAILS Joining milling: yes Multifunctional unit: yes Max. speed of advance: 20 m/min Panel height: 60 mm Assembled units in the format cutting part Unit: corrections Automatic intervention after time: yes Motor power: 3 kW Speed: 11,500 rpm Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Glue basin for hot glue: yes Press roller conveyor edge: yes Number of press rollers: 6 Assembled units in the edge processing part Unit 1: head processing Model manufacturer: 08.415 Number of motors: 2 Motor power: 0.66 kW Duslov Eaqhsn Ucv Net Speed: 12,000 rpm Unit 2: edge milling Model manufacturer: 08.055 Number of motors: 2 Engine power: 1 kW Speed: 12,000 rpm Unit 3: Multifunctional unit Manufacturer model: 08.342 Number of motors: 2 Engine power: 0.66 kW Speed: 12,000 rpm Unit 4: Edge scraper Manufacturer model: 08.519 Unit 5: Glue scraper Manufacturer model: 08.50 Unit 6: Brush unit Manufacturer model: 08.612 Number of motors: 2 Engine power: 0.25 kW Speed: 1,500 rpm Control system: ICOS OPEN CE marking: yes

Condition: excellent (used), Year of construction: 2016, Panel height 8 - 60 mm Pvc/Abs/Wood mm 0.3...20 Dujln Ucsvuw Amjv Net Feed speed up to 30 m/min Gluing: EVA Hotmelt Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, edge thickness (max.): 22 mm, product height (max.): 65 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 50 mm, TECHNICAL DETAILS Type: Single-sided automatic edge banding machine Control: CNC with 10" touchscreen Industrial conveyor chain: 1" 1/4 Feed speeds: 10 - 14 - 18 - 20 m/min Milling and processing units Joining milling unit: FI-502 Glue application unit: VC-710 Cutting unit: IN-801 Flush milling unit: RS-100 (top and bottom) Multifunctional unit: CR-202 (FAST system with 4 positions standard) Scraping unit: RBK-503, NC (2 positions) Flat scraper: RCC-701 Workpiece specifications Workpiece thickness: 10 - 65 mm Maximum workpiece height with form milling unit: 35 - 65 mm (depending on profiles) Edge thickness of rolled goods: 0.4 - 3 mm Edge thickness of strips: 0.4 - 22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (for a length of 140 mm): 85 mm Minimum workpiece width (for a length of 250 mm): 50 mm Glue application Glue container capacity: approx. 3 kg Heating time when 1/2 full: approx. 10 min MACHINE DETAILS Length: 6,000 mm Width: 1,780 mm Height: 1,770 mm Central extraction connection: 200 mm Gluing extraction connection: 80 mm Joining milling extraction connection: 120 mm EQUIPMENT - CNC control with 10" touchscreen - Jointing milling unit FI-502 - Glue application unit VC-710 - Cutting unit IN-801 Duolevzydten Ucv Nst - Flush milling unit RS-100 (top and bottom) - Multifunctional unit CR-202 with 4 positions - Scraper unit RBK-503 with NC control (2 positions) - Flat scraper RCC-701 Note: Machine is delivered without the workpiece return device shown in the pictures.

Condition: good (used), Year of construction: 2010, Functionality: fully functional, feed rate X-axis: 20 m/min, edge thickness (max.): 12 mm, product height (max.): 60 mm, product length (min.): 150 mm, product width (min.): 65 mm, TECHNICAL DETAILS Joining milling: yes Multifunctional unit: yes Material and speed information Max. height of the panel: 60 mm Min. length of the panel: 150 mm Min. width of the panel: 65 mm Thickness of the edge: 0.3 - 12 mm Max. feed speed: 20 m/min Pressure by means of: rubberized belt Assembled units in the part of the format cut Unit: corrections Additional systems Lamps for heating the edge: yes Glue basin for polyurethane glue: yes Prefusor for polyurethane glue: yes Pressure roller conveyor edge: yes Number of press rollers: 6 Assembled units in the part of the edge processing Number of units: 6 Unit 1: head processing Model manufacturer: 08.415 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Unit 2: router Model manufacturer: 08.0555 Number of motors: 2 Motor power: 1 kW Unit 3: multifunctional unit Model manufacturer: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Djlov Ean Tjn Ucv Neut Unit 4: edge scraper Model manufacturer: 08.519 Unit 5: glue scraper Model manufacturer: 08.521 Unit 6: brushing unit Model manufacturer: 08.617-2 Number of motors: 2 Motor power: 0.18 kW Additional systems Spray unit: yes Control system: WINDOWS Software for programming the machine: ICOS open TS CE marking: yes

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Deln Ucjpz Shkev Neut Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: good (used), Year of construction: 2008, Functionality: fully functional, edge thickness (max.): 20 mm, product height (max.): 60 mm, product width (max.): 55 mm, TECHNICAL DETAILS Type of edge applied: thin edge thick edge solid wood Gluing system: EVA Joining milling: yes Multifunctional unit: yes Number of working units: 8 Panel thickness: 12 - 60 mm Panel width: min. 55 mm Edge thickness: 0.3 - 20 mm Speed of advance: 24 m/min Pressure: rubberized belt Panel guide Panel support guide: yes With NC positioning: yes Assembled units in the part of the format cut Unit: corrections Automatic intervention after time: yes Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 2 Glue pot for hot glue: yes Prefusor for hot glue: HOT MELT A34 Press roller conveyor edge: yes Assembled Aggregates in the edge processing section Number of aggregates: 6 Aggregate 1: Head processing Model manufacturer: HL 81 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Aggregate 2: Router Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Aggregate 3: Multifunctional aggregate Model manufacturer: FK 13 Number of motors: 2 Automatic tool change: yes With NC positioning: yes Processing speed: 20 m/min Dsln Ujv Eakhecv Njut Motor power: 0.4 kW Speed: 12,000 rpm Aggregate 4: Edge scraper Model manufacturer: MN 21 With NC positioning: yes Aggregate 5: Glue scraper Aggregate 6: Brushing aggregate Number of motors: 2 Motor power: 0.18 kW Speed: 14,000 rpm Additional systems Spray unit: RIEPE LP 163/93 Control system: PC 22 CE marking: yes

Condition: good (used), Year of construction: 2007, Functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, TECHNICAL DETAILS Jointing milling: yes Multifunctional unit: yes Router unit: yes Drive speed: 25 m/min Pressure by means of: rubberized belt Edge thickness: 0.3 - 3 mm Number of units: 9 Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Automatic intervention after time: yes Motor power: 3 kW Speed: 9,000 rpm Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Press roller conveyor edge: yes Number of press rollers: 7 With NC positioning: yes Assembled units in the part of the edge processing Unit 1: Head processing Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Unit 2: Router Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Unit 3: Multifunctional unit Manufacturer model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Unit 4: Router Number of motors: 1 Automatic intervention after time: yes Motor power: 5 kW Speed: 11,600 rpm Unit 5: Edge scraper Manufacturer model: PN10 Unit 6: Glue scraper Unit 7: Brushing unit Number of motors: 2 Spray unit: yes Control system: PC22 Barcode label reader: yes Duslov Eahyen Ucv Net Safety standard: CE marking

Condition: good (used), Year of construction: 2014, Functionality: fully functional, feed rate X-axis: 24 m/min, edge thickness (max.): 3 mm, product height (max.): 60 mm, product height (min.): 10 mm, product length (min.): 150 mm, product width (max.): 3,200 mm, product width (min.): 100 mm, TECHNICAL DETAILS Type of edge applied: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunctional unit: yes Number of working units: 8 nr Software: SINTRA Advance speed: 25 m/min Panel dimensions Panel height: 10 - 60 mm Panel length: min. 150 mm Panel width: 100 - 3,200 mm Edge thickness: 0.3 - 3 mm Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Model manufacturer: RT30 Automatic intervention by time: yes Speed: 9,000 rpm Edge processing systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 6 Gluing system: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Prefusor model: HM20 Press roller conveyor edge: yes Number of press rollers: 4 With positioning of NC: yes Assembled units in the part of edge processing 1-6 Unit 1: Head processing Model manufacturer: IT90-S Processing speed: 28 m/min Speed: 12,000 rpm Unit 2: Edge milling machine Model manufacturer: RF10 Speed: 12,000 rpm Unit 3: Multifunctional unit Model manufacturer: AR30 Automatic tool change: yes Processing speed: 18 m/min Speed: 12,000 rpm Unit 4: Edge scraper Model manufacturer: RB40 With positioning of NC: yes Aggregate 5: glue scraper Model manufacturer: RC20 Aggregate 6: brushing aggregate Model manufacturer: SZ30 Speed: 1,400 rpm Additional systems Spray aggregate: yes CE marking: yes MACHINE DETAILS Total installed power: 25 kW Conveyor and return system Duoln Ucjv Eabajv Nst Drive speed: 24 m/min Parts return for edge banding machine: left Panel ejection: transfer roller conveyor Panel drive: motorized carpet