Condition: used, Lot 1 squaring-edging line composed as follows: 1) "Easy Order" automatic feeder for longitudinal and transversal passage of panels * Automatic adjustment of the stops according to the size of the panel * Number of cycles / minute from 10 to 14 depending on the type of passage and size of the panel. The number of cycles / minute is minimal in the case in which panels with always different dimensions are worked * Workable dimensions for longitudinal passage: min 250 x 130 max 3000 x 1200 * Workable dimensions for cross passage: min 130 x 250 max 1200 x 3000 * Maximum panel weight: Kg 70 * Brushless motors 2) External milling machine for customized processing * Device for milling and removing material on the non-edged side of the panel * Ready for "Eco Power Pack" * N ° 1 motor 6,5Kw - 12000 rpm with vertical rotation axis * Pneumatic automatic vertical exclusion * Automatic lubrication of the guides 3) Bridge system for customized longitudinal and transversal machining * Automatic movement of the main guide on linear guides with Brusless motor * Automatic vertical exclusion of the main guide * Automatic lubrication of the guides * Max opening 3000 mm 4) "Watch" line supervisor with automation for handling and returning the panel to the operator * Numerical Control with PC Office Software with Windows 7 operating system * Barcode reader * Tele diagnosis * Supervision and control software for quick and easy management of the main functions of the squaring machine. * Realistic and descriptive interface that allows you to monitor the time and status of the squaring-edgebander. * Unlimited number of programs * Possibility of extrapolation of production reports 5) Manual loading station with automatic recognition of the size of the panels * N ° 3 air curtain benches (dim. 640 x 1600 mm each) for the positioning of the panels with roller conveyor for the progress of the same * Inclined and motorized introduction roller conveyor (dim. 2600 x 3200 mm) for the alignment of the panels on the guide principal * Main guide controlled by C.N. for alignment to the work line. * Barcode reader for automatic recognition of the dimensions of the introduced panel 6) Panel turner * Roller conveyor with 6 + 6 motorized rollers * Double plane group for rotation * Fully automatic motorized rotation controlled by encoder with adjustment by C.N. * Motorized roller conveyor at the exit of the squaring-edgebander 7) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 8) 90 ° translation station * N ° 2 transfers with rollers and belts (dim.1440 x 3200 mm and 1600 x 3200 mm) 9) Rotation station for panels with a width greater than 1300mm * N ° 1 roller conveyor (dim.1280 x 2700 mm) 10) Transfer with 3 belt conveyors 11) 90 ° final translation station * N ° 1 transfer with rollers and belts (dim.1440 x 3200 mm) * N ° 1 transfer with rollers and belts (dim.1100 x 3200 mm) 12) Stefani Evolution SB One squad-edging machine * Numerical Control with PC Office Software with Windows operating system * DVD player * Tele diagnosis * Bar code reader with radiofrequency keyboard (with the possibility to customize the reading software and data entry) * Panel height 60 mm * Minimum panel width 90 mm * Maximum panel width 1600 mm * Variable feed speed 10 - 40 mt / min * Working height electronically adjustable by C.N. * AA anti-adhesive group * Double shredder group with electronic positioning Kw 5.8 + 5.8 * Rectifier unit wi... Dsbvf H Hsvphxne Docg

Year of construction: 2006, Condition: good (used), - Glue pot - Conversion: carried out by the company Hüttenhölscher in Verl Dsbvf H Hoibdyqe Decg - Application: glue application line for handle strips - Vacuum table: included - Automatic pressure zone: included

Condition: used, Year of construction: 1986, overall weight: 450 kg, plate length: 2,000 mm, 2700x1050x1700 Debvf Hsua Ar Ej H Decg Workpiece length max. 2000 mm

Condition: good (used), Year of construction: 1998, Functionality: fully functional, edge thickness (max.): 3 mm, compressed air connection: 6 bar, height adjustment type: mechanical, working height: 850 mm, power: 4.5 kW (6.12 HP), material thickness: 3 mm, plate height: 850 mm, pressure: 6 bar, space requirement height: 1,200 mm, space requirement length: 2,100 mm, space requirement width: 1,100 mm, tilt adjustment saw blade: 15°, HolzHer Quick 1433 CP Machine dimensions: Djbvfsu E If De H H Decg -length 2100mm -Width 1100mm -Height 1200mm -Workpiece infeed height 850mm -Operating mode one-sided left Working dimensions: -Glue thickness 0.3mm-3mm -Cartridge glue application, no glue tray and therefore no cleaning necessary! -Glue height 50mm -Workpiece width min. 60mm -Workpiece length min. 180mm -Workpiece thickness 6mm-45mm Feed rate: 5m/min at 0.18KW Electrical connected load: 4.5 KW Compressed air connection: 6 bar Extraction: 400m3/h (at 6 mbar dyn pressure) Milling unit: 1942M swivel 15° Multifunctional trimming unit: flush, radius & chamfer trimming Machine has been tested, see video. (Video will be uploaded after advertisement release)

Condition: good (used), 1ST AND 2ND LINE EDGE SQUARING MACHINE WITH BRIDGE LOADING AND PANEL TURNER BIESSE BRAND STREAM SB2 MODEL, CE READY DELIVERY MIN/MAX PANEL HEIGHT MM. 10/60 MIN/MAX EDGE HEIGHT MM. 15/65 MIN/MAX EDGE THICKNESS MM. 0.3/3 MAX SOLID WOOD SECTION PANEL PROTRUDENCE FROM TRACK MM. 35 MIN. PANEL LENGTH MM. 240 MIN. PANEL WIDTH MM. 240 FEED SPEED PNEUMATIC CONNECTION COMPOSITION: SPINDLE MOULDER DOUBLE CHIPPING DEVICE GLUING UNIT YES EDGE HOLDER MAGAZINE WITH 6 POSITIONS Dcebvf Hsvvcd Sj H Dsg ENDING UNIT YES OVERLAPPING UNIT CORNER UNIT 4-MOTOR ROUNDING UNIT SPINDLE MOULDER EDGE SCRAPING UNIT YES GLUE SCRAPING UNIT YES HAIRDRYER UNIT YES BRUSHING UNIT YES NC CONTROL 410 RBO DOUBLE-STATION BRIDGE LOADER MODEL SELECTA C RBO FLAT PANEL TURNER MODEL GP

Condition: like new (used), Year of construction: 2013, IMA COMBIMA 2013 - 2x loading / unloading station - for PVC, ABS & solid wood edges - U-form layout - with KFA 20 aggregate Dcebvf H Hjtxtkxe Dog - immediately available For more Info, Video and technical specs, please contact us.

Condition: reconditioned (used), 380/400 V 50/100/200/300 Hz 0,25 - 18 kW Information and design upon request Dcebvjn Ut Rgjf H H Djg tested or factory reconditioned

Year of construction: 1997, Condition: used, - edge banding unit - Cross-cutting unit - Milling unit Dcobod Inktsvf H H Djg - Fine trimming unit - scraper - buffing unit

Condition: ready for operation (used), Year of construction: 1999, Release agent application 2 jointing cutters 1x counter run +1x center run Edge magazine with 6 channels Pressure zone 1 large pressure roller + 4 small holding pressure rollers Dcjbvf Hjua Arxo H Dog Edge trimming front rear Flush trimming Copy corners Cleaning agent application Buffing longitudinal edges For edge material from 0.4 - 3mm thick Machine is equipped with a guide carriage to produce rectangular parts. 6-fold edge magazine. Weight. approx. 4to

Year of construction: 1995, Condition: not inspected (used), Connected load 380V 55A Dcebvf H Henxkm Es Deg PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: good (used), - with nesting package - interchangeable glue basin - always serviced - low mileage Dcobvf Hjtya T Ne H Dog

Year of construction: 2020, Condition: like new (used), I sell the edge banding machine Biesse JADE 240 Year 2020. Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding manual adjustable Pressure zone manual adjustable End cutting saw manual adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes with spraying Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Dsbvenxyi Tsf H H Docg Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: reconditioned (used), 50 tons Aggregates, motors, gearboxes, machine stands, soundproofing, Debvoif Rnpjf H H Docg milling cutters, tools, electronic cards, controls HOMATIC NC 21, PC control Further information on request.

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 558/0-112, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 tracer nozzle printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Dobveh Uyg Ejf H H Docg Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Year of construction: 2009, Condition: excellent (used), I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Dcobvf H Hsiu U Swo Dsg Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Tilting milling Radius scrapers R2 Polishing brushes Hot-air blower TOP condition, possible to test !

Year of construction: 1998, Condition: like new (used), double-sided machine for formatting the edge of the workpiece edge banding and finishing of various edge materials Dobvf Hjd A Ud Re H Djcg from the roll up to 3 mm edge thickness. Use as first machine in a machine line for longitudinal throughfeed. Fixed fence side left, moving side right. basic machine: - with continuous machine column - Glue roller drive at feed stop - Glue container lift at feed stop - Glue container clamping workpiece actuated. workpiece transport device: - rolling block link chain with ball bearings - chain track with precise, hardened running and guiding surfaces - magnetic motor braking of the transport chain - infeed device with 3 inclined rollers - intermediate transport at the outlet 400 mm long. upper pressure: - with driven V-belt - motorized height adjustable width adjustment: - linear guide as well as rolling guides on hardened supports - motorized rapid/creep drive - ball screws and cardan drives for precise positioning - digital position display paint finish: - Homag textured paint gray RDS 240 80 05 Electrical equipment: - Operating voltage 380/400 V, 50/60 Hz - Control voltage 24 V - control cabinet mounted, installed according to Euronorm EN 60204 - electronic frequency converter with motor brake function - manual switch for setup mode Homatic electronic control NC21 control system Technical data: - Feed infinitely variable 10 - 32 m/min. - Workpiece protrusion fixed 30 mm - workpiece thickness 12 - 40 mm - Working height up to upper edge of chain 950 mm - Working width double-sided min. 240 mm - Working width double-sided max. 1.500 mm - edge material roll 0,3 - 3 mm - Edge cross-section max. - for PVC 135 mm2 - for veneer 100 mm2 - roller diameter max. 900 mm - ground conditions must correspond to the foundation plan Compact double hogger longitudinal 4,5 kW KD10 Free space for subsequent installation of a standard hogging unit controlled 4,5 kW Noise protection Format part Gluing part A3 Noise protection aggregate part basic length Workpiece protrusion adjustment automatic adjustment pressure zone Optimat Edge folding device Cross-cut unit HL81 chamfer/straight free space - 1.050 mm for cross-cut unit pre-milling unit 0,55 kW Free space 350 mm for pre-milling unit Milling unit 0.4 kW Milling unit 0,4 kW chamfer/radii autom. Universal milling unit 4 kW controlled fettling unit profile pneumatic adjustment fettling profile Edge heating white break Electronic width adjustment EB 02 Space requirement: length 6.650 mm x width 5.200 mm Total connected load: 72 kW Rated current: 125 A Total extraction capacity: 18,690 cbm/h Air speed: 35 m/sec. Compressed air consumption: 45 NI/cycle Machine is factory reconditioned, as new, warranty

Condition: reconditioned (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm Dsbvfeiamufj H H Dscg operating instructions no exchange unit for flush milling

Year of construction: 2009, Condition: good (used), I sell the fully equipped edge banding machine EBS XB-27, year 2008: Configuration: Entry fence manual adjustable Premilling manual adjustable Dsbvek D Sm Usf H H Dscg Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Polishing brushes Working thickness adjustment servo driven Material height 8-55 mm Edge thickness 0,4-3 (6)mm Feeding speed 8 m/min. Total length including feeding plate 4280mm Good condition, fully working!

Year of construction: 1988, Condition: reconditioned (used), Bonding height max. 60 mm thickness 0,4 - 20 mm cross-cutting shear up to thickness max. 3 mm compressed air 6 bar weight approx. 2.800 kg Gluing system roller with glue pot on top 8 l suction connection 2 x 150 mm space requirement 6.000 x 1.000 x 1.800 mm Units: glueing, pneumatic cross-cut shear, double cross-cut saw, pre-milling, fine milling, free space after the protective hood Magazine plate for roller and bar HL 27 8° - magazine left machine sliding chain plate dimension 60 mm long 80 mm wide top pressure with compound V-belt 70 mm wide top pressure adjustment manual with sico-counter Infeed ruler SM gluing section with 8 l glue pot Djbvfon Ut Ids H H Dscg 4-roller pressure zone cross-cut unit with 2 motors 165 V/1 kW/300 Hz/18.000 rpm flush trimming unit with 2 motors 165V/1,1 kW/300 Hz/18.000 rpm top and bottom probing chamfer milling unit with 2 motors 165 V/0,6 kW/300 Hz/18.000 rpm top and side probing Adjustment by probing by means of sico counters free space 550 mm for mounting of further aggregates noise protection hood over machining units - 2 doors Chip conveyor belt Feed gear adjustable converter 300 Hz, 10 kVA rated voltage 400 V, 3 ~ rated current 40 A Roller rail

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 315/0-110, Top control panel Edge feeding 1902 Glue application station 1906 cross-cut shear 1902 Printing unit 1816 Cross-cut unit 1918 Trimming unit 1942M Rounding scraper 1929 Dsbvf Heh Ux Suo H Djcg Form milling unit 1983 Surface scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar suction connection Ø 120 mm Length approx. 5300 mm

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Dobeh U Nzpjvf H H Decg Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: good (used), Year of construction: 2004, Functionality: fully functional, double-sided Homag format processing and single-sided edge banding machine PROFI KFR23/07/03/PU/45 Debvf H Hjrfx Ero Dscg basic machine Workpiece transport device - continuous chain tracks - rolling block link chain with ball bearings on running and guide surfaces top pressure - with driven, continuous composite V-belt Width adjustment of the moving side - Electronic width adjustment with rapid/creep speed + digital position indicator Homatic electronic control NC21 control unit Industrial computer 68040 with 16 MByte RAM 12.1" color monitor with PC-compatible keyboard built into the control panel at the infeed Remote diagnosis Feed infinitely variable 10-40 m/min. Workpiece protrusion 40 mm Workpiece thickness 8-60 mm Working width double-sided min. 240 - 270 mm Working width double-sided max. 4,500 mm Machine infeed MII+500 1 level for transferring workpieces Infeed device 10 rollers can be folded up Automatic center support KF/FL/KL 20 Release agent sprayer top/bottom Compact double hogger lengthwise/crosswise 6.6 kW KD11 PU34 copact gluing unit Glue application unit QA34 Gluing unit A3 - 68 rolls Hot melt glue unit A34 Magazine A3 - 68 rolls - Edge thickness 34 x 0.3 - 3 mm - Edge thickness 34 x 0.3 - 2 mm Flexible edge sequence control Pressure cone C - 1 driven pre-press roller diameter 150 mm - 6 post-pressing rollers diameter 70 mm Snipping unit HL04 FASE/GERADE Pneumatic adjustment FASE/GERADE Pre-milling unit top and bottom 0.55 KW Shaping trimming unit FK13 8-fold automatic Automatic MN21 multi finishing unit Finishing unit FA11 top / bottom - Finishing unit glue joint Brushes in the gap Barcode reader Hand-held scanner Wireless Input PC21 instead of NC21 Network connection Ethernet

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Edge banding machine with jointing cutter (incl. DIA tool), with PLC control (incl. touch screen) with hot-melt glue application to the workpiece for edgebanding material up to 3 mm: maintenance-free, coated gluing bowl with exchangeable bowl preparation, HF cross-cut saw station (approx. 16,000 rpm) for front and rear edge overhang, HF trimming station (approx. 16,000 rpm) with exchangeable panel trimmer (combination version), router fine adjustment from the operator's side (Hebrock system), Corner rounding cutter (minimum workpiece length 300 mm, max. workpiece thickness 40 mm), surface scraper incl. pneumatic lifting, robust chain drive, double roller top pressure, unit viewing window from the Dobel H E H Hevf H H Dscg machine rear and operator side, extendable workpiece workpiece support, feed approx. 10 m/min, 60 mm workpiece thickness, incl. 1x exchangeable basin incl. chassis

Condition: excellent (used), Year of construction: 2022, I sell the fully equipped edge banding machine OTT Tornado+, year 2022: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone manual adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the middle and back Debvf H Homig I Se Djcg Working thickness adjustment servo driven Material height 8-60 mm Edge thickness 0,4-15 mm Feeding speed 12-18 m/min. Kilometerstatus 650.000 Meters edgebanded. Available february 2024 Including full documentation and CE. Very good condition, fully working!

Year of construction: 1990, Condition: used, Power supply 400 V 3 kW Glue roller Milling unit 2x flush roll material up to 0,4 mm LxWxH: 3150 x 680 x 1250 mm Dcebskkfk Nsvf H H Dog weight approx. 400 kg Conversion to 2 mm PVC edges possible = additional price 1.000,00 €