Condition: used, machine/vehicle number: 005588, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Cgsb Eyewcx U Eelkujt Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Hebrock AKV3005DK-F edge banding machine with sweeping, corner copying and two scraper blades. Very well maintained machine from a small business in excellent condition. Touch screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, special equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was only purchased for one job. Top pressure manual adjustment with SIKO counter Inlet ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Milling with Leitz Whispercut slide cutters, still sharp Gluing unit with automatic edge feed for rolls up to 3mm Pressure zone with 4 rollers Cjb Eylotpn Etskuogt cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounding cutter R2, pneumatically adjustable between thin and thick edge The profile trimming unit can also be used for the shelf program, i.e. only the straight edge is rounded and not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically engageable Hood lock CE mark Operating instructions A video of the machine in operation can be sent on request. All inserts of the milling units and the scraper blades have been renewed or turned, saws have been sharpened. The machine is therefore ready for immediate use. Only the slide milling cutters (Whispercut) have not been renewed, but are still sharp. Paint damage repaired. The Hebrock AKV series is the predecessor of the current K series. Machine has only approx. 730 operating hours (glue basin switched on), but the frequency converters were only switched on for approx. 455 operating hours. Machine is in very good condition, see original photos. Dimensions of the machine approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 2008, Additional Equipment Adjustable Infeed Fence Application of Separating Agent to Workpiece Ceb Eswctyvsylkuegt Pneumatic Adjustment of End Trimming Unit (Bevel/Straight) Pneumatic Adjustment of Scraper Blade Pneumatic Adjustment of Milling Unit Automation Package II for Dual-Router Machines Pneumatic 2-Point Adjustment for End Trimming This BRANDT KDF 680 edgebander was manufactured in 2008. It is a robust and reliable machine, ideal for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 680 edgebander. Contact us for more information. Application Types Edge Banding

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W Ceb Eylkeu R Sy Ajusgt - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: very well maintained/refurbished in a workshop With manual pressure bridge adjustment With central lubrication of the chain guide rail manually via grease nipple - Edge thickness for rolls 0.4 - 3 mm (depending on material) - Edge thickness for strips 0.4 - 8 mm (depending on material) Edge cross-section max. 6 x 42 mm Edge height max. 65 mm Workpiece thickness 6 - 60 mm Workpiece width min. 160 mm (without corner rounding 1832) Feed speed 10 m/min. - Edge thickness max. 6 mm - PLC control (program-controlled) - Glue height max. 60 mm - Pre-milling unit 1801 in up- and down-feed (with diamond tools) Automatic edge feed 1903 Transport of rolls and strips Maximum load capacity 40 mm Rolls; Max. edge thickness 3 mm (depending on material) - Adhesive application station cartridge 1906 M Automatic glue height adjustment (tactile nozzle) Processing of EVA and PUR adhesives Adhesive in cartridges or granules Cgob Eyewa Eqholkujt Processing of neutral or colored adhesives Adhesive application using nozzle technology Heat-up time 3 min. Incl. automatic reloading Incl. manual flushing function via separate flushing channel Magazine capacity: 1 cartridge including pressure regulator for regulating the cartridge contact pressure Automatic adhesive temperature reduction over time - 1912-3 pneumatic pressure unit First roller driven with pneumatic plunge control 2 conical pressure rollers - 1918 trimming unit (60 mm) pneumatically pivotable to 10° - 1827 MOT4 multi-function milling unit for milling the upper and lower longitudinal edges with motorized positioning of the horizontal guides Tracer shoes with motorized axial positioning of the milling motors including pneumatic adjustment (separate top and bottom) for flush radius milling including blow nozzles Flush milling 3 mm radius Bevel tilt 0-15°, manually (for max. edge thickness 6 mm) Pneumatic tilting device for milling unit 1827 MOT 4 Pneumatic tilting to a 15° bevel from the control unit - Vertical tracing pneumatically adjustable by 0.1 mm for milling with edge overhang, e.g., for plastic edges - Corner rounding unit 1832 Corner rounding function for up to 3 mm edge thickness Tool thickness 12-60 mm including automatic lifting device (max. Feed speed 10 m/min.) - Radius scraper with motorized adjustment (MOT 2) incl. pneumatic adjustment (separate top and bottom) Chip catcher - Flat scraper 1964 for removing adhesive residue for a clean bond joint top and bottom application-controlled with extendable workpiece support Availability: Short-term Location: Bavaria

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Csb Eylkeuhv R Dsuegt Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Csb Eyowcx Tuelkusgt Operating Units: 13 nr

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: ah/006357, Perfect glue line and versatility of use with the new SGP glue pot (Smart Glue Pot) and the PU BOX L pre-melter. Surprising finishing quality with the AirFusion+ technology that allows edge banding without using glue. The simply perfect edge banding machine for the industry that needs to continuously produce numerous panels, even different ones. Cgob Ejwf Iw Uoylkuot

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 274/0-110, total length: 3,600 mm, total width: 750 mm, total height: 1,300 mm, Holz Her Sprint 1310-1 Edgebander Cob Eylkjwdl Eaouogt

Condition: good (used), Hebrock Edge Banding Machine Glue tank granulate, applied by roller Pre-guillotine Pressure rollers Ready cutting saw Top-bottom cutters Edge thickness 0.4-3mm Feed 10m/min Max. thickness of the processed element 40mm Cgjbjwfq R Re Eylkuet Machine ready to work, presentation possible. Compact dimensions, machine length 300cm, weight +- 750kg

Condition: good (used), Code: 0086 Brand: EBS - ITALY Model: XB/23 - CE Standard Automatic single-sided edgebander for applying edges in wood, veneer, abs, pvc, melamine, roll materials for joinery workshops, furniture, made-to-measure furniture, kitchens, bathroom furniture, panels and various - CE Standard Technical data: Min/max panel height mm 10/45 Edge thickness mm 3 Feed speed 8 mt/min Feed motor Kw 0,55 Minimum panel length mm 140 Composition: Gluing unit - Glue pot capacity Kg 2 - Absorbed power Kw 3 - Heating time 12 min Roll material cutting shear End trimming unit for edge cutting - Motor absorbed power 0,19 Kw - Cutter rotation speed 12000 rpm - Blade diameter mm 125 - Front copiers Fine finishing unit for top and bottom trimming/edging - N° 2 motors each 0,70 Kw - Cutter rotation speed 12000 rpm - Cutter diameter mm 48 Z3 Telescopic support for panels N° 2 suction inlets diameter mm 100 Compressed air 6 bar Overall dimensions mm 2550 x 900 x 1370 h Weight kg 430 Cgob Eyewayqcolkuet

Condition: excellent (used), Year of construction: 2017, Single-sided edge banding machine for processing straight workpiece edges and for gluing and finishing various edge materials in longitudinal and cross-pass motion. OVERVIEW OF THE UNIT EQUIPMENT: PPC 319 electronic control unit with 18.5" touchscreen Infeed guide Jointing unit 2 x 2.2 kW 200 Hz Gluing unit GluJet (thin-film technology) with granulate or cartridge system Pressure unit with 3 rollers Trimming unit, bevel/straight, 2 x 0.35 kW Pneumatic adjustment for trimming, bevel/straight Multifunctional milling unit 2 x 0.55 kW, up-cutting Flush and radius/bevel trimming Corner contouring Profile scraper with quick-change heads Special tracking device for profile scraper Pneumatic adjustment of scraper blade Glue joint scraper blade, surface Buffer unit RELEASE AGENT Workpiece Spray Unit Cleaning Agent Workpiece Spray Unit Total length: 4930 mm Width: 1400 mm Height: 1774 mm Weight: 1450 kg Ceb Eyowalb Holkujgt

Condition: used, machine/vehicle number: 005064, Position 1: Single Edgebanders BIESSE-STREAM B1 7.0 Cjb Eylkewcmycouogt Position 2: Panel Return Systems BIESSE-STREAM B1 7.0

Condition: ready for operation (used), Year of construction: 1996, This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us. Application Types Edge Banding Cgebsv U Etys Eylkuet

Condition: new, Year of construction: 2025, Functionality: fully functional, edge thickness (max.): 3 mm, type of input current: three-phase, compressed air connection: 6 bar, height adjustment type: mechanical, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, warranty duration: 12 months, frequency: 50 Hz, tank capacity: 3 l, material thickness: 3 mm, plate length: 1,200 mm, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Cgjbjwg E Hvj Eylkuet Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 10 h, Functionality: fully functional, overall weight: 250 kg, compressed air connection: 6 bar, edge thickness (max.): 3 mm, workpiece height (max.): 60 mm, Selling a used SCM Contura molding edge banding machine. Year of manufacture 2004, as good as new, has approx. 10 operating hours. - Feed with one roller - Pressure rollers for straight parts (can be removed for shaped parts) - Heating rod for edge preheating - Glue basin with top and bottom heating - Chassis - Gluing thickness 0.5 - 3 mm - Workpiece thickness 12-60 mm Cgob Eyleu Apykokuot - Workpiece length min. 230 mm - Feed speed 2-10 m/min You are welcome to view the machine at our warehouse in Oberteisendorf by appointment. Suitable transport can be organized. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Code: 0085 Brand: BIESSE ARTECH - ITALY Model: SINGLE 120 - CE Standard Edgebander for straight and shaped panels with glue pot with automatic feed for edges in wood, pvc, abs, veneer, for furniture, kitchens, panels, joinery, custom-made furniture - CE Standard Technical data Cgsb Eylswaxlrekujt Panel height from mm 10 to 120 Edge thickness mm 0,4 - 3 Minimum radius mm 25 Feed speed from 4 to 16 mt/min Glue pot capacity approx 3 litres Motorised feed at variable speed mt/min 4/18 End cutting blade unit for cutting excess edge lengths Tilting table Telescopic support roller conveyor for supporting large panels Compressed air 6 bar Total power consumption Kw 5,2 Overall dimensions mm 1700 x 900 x 1500 h Weight kg 350

Condition: used, Holher Primus 1436 SE PVC edgebander from 1997. The machine ran perfectly until the end. Then a defect occurred with the cartridge heater. It was removed, repaired, and not reinstalled. Cgeb Eylewdl Syokuet

Condition: used, machine/vehicle number: 004592, Type of edging: Thin edge, Thick edge, Solid wood Cgjb Eylkjwcmxloujt Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: like new (used), Year of construction: 2018, operating hours: 1,139 h, Functionality: fully functional, total length: 4,077 mm, overall weight: 1,000 kg, Edge banding machine Lange B 90 KFE - Single-sided automatic edge banding machine with - 7" color touch screen - Roller table 800 mm - Joining unit, 2 motors equipped with DIA cutter - Hot melt adhesive application to straight workpieces EVA-PUR glue pot Coated with discharge function at the bottom - Quick-change basin Cgob Esu D Htqsylkuet - 2 x release agent spraying Ripa - HF cross-cut saw station, - HF trimming unit, - corner copying unit, - chain feed, double roller top pressure, - extendable workpiece support rail, - Signal lamp for workpiece sequence - For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 - 3.0 and 5.0 mm - Workpiece height 8 - 60 mm - Workpiece width min: 75 mm - Feed speed: 8 -10.0 m/min; - Radius scraper - Surface scraper - Finishing unit - buffing - 2 x cleaning agent spraying Ripa - LED lighting inside - Extendable roller support - Total length 4077 mm - Weight approx. 1000 kg

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Cgob Eylswcmw Ijkuot Operating Units: 8 nr

Condition: used, machine/vehicle number: 006527, Type of edging: Solid wood Gluing System: PUR Cgjb Eyopig A Islkuet Premilling Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 62 mm

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Cgeb Eylksnzrt Ajust Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 50 mm

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Cgjb Ejq A I Aaoylkuot

Condition: used, machine/vehicle number: 007721, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Cgjb Eyev Ir R Solkuet Maximum panel thickness: 60 mm Operating Units: 8 nr