Condition: used, machine/vehicle number: 007904, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Dslipdswduhkjwvjcg Corner Rounding Unit: yes Max feed speed: 32 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: excellent (used), Year of construction: 2014, Feed Speed: 8-18m/min Feed Speed with Corner Rounding: 14m/min WorkPiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material strips: 0.4-12mm Extension of Infeed fence 300mm PU Rollers Joint Trimming 2x2.2Kw Workpiece Pre-Heating Airtec Unit Quickmelt Application Unit End Trim Chamfer / Straight with pneumatic adjustment Multi Trimming MS 40 Unit (2 profiles) with multiple roller sensing Multifunctional Contour Trimming Dslipdswgldujwvocg Profile Scraping MZ 40 (2 profiles) with multiple roller sensing Glue Joint Scraper Buffing Unit Separating agent Spray Device Lubricant Spray Unit Detergent Spraying Unit Automatic Edge Infeed Device Power Touch Control System Homag TFU140

Condition: used, total length: 3,000 mm, total height: 1,400 mm, total width: 1,000 mm, Weight: 700 kg Dslswh Ai Rjipdwvjcg - Documentation available: No - Transport dimensions: 3000mm x 1000mm x 1400mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 Dslipdwekwhapjvjcg (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen

Condition: excellent (used), HOLZ-HER Streamer 1057 edge banding machine - used - Control with LCD display, pivoting control panel, manual, self-clamping pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutters for up- and down-feed, strip magazine, standby function, GluJet cartridge system, cartridge system with tactile nozzle, use of PUR adhesives possible, printing unit with driven roller, pneumatic control of the printing unit, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, diamond-coated trimming tools, corner rounding unit with diamond-coated cutter, radius scraper, chip catcher for radius scraper, surface scraper, Blow nozzle on the surface scraper ----- Technical specifications ----- Edge thickness for rolled material: 3 mm, Edge thickness for strip material: 5 mm, Max. edge thickness for corner rounding: 3 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min., Djlipowakrwjdwvjcg Distance to workpiece support: 600 mm, Support plate diameter for edge material: 800 mm, Cut-off knife for rolled material up to: 3 mm, Heat-up time: 3.5 min., Joining cutter power: 1.2/0.8 kW, Cut-off saw power: 2 x 0.45 kW, Milling station power: 2 x 0.6 kW, Corner rounding power: 0.3 kW, Extraction nozzle diameter of jointing milling unit: 2 x 80 mm, Extraction nozzle Miter saw diameter: 2 x 70 mm, Extraction nozzle diameter of milling unit: 100 mm, Extraction nozzle diameter of scraper unit: 120 mm, Compressed air connection: 6 bar, Total length: 4,630 mm, Dimensions (LxWxH): 4,630 x 1,200 x 1,630 mm, Weight: 1,200 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Dcslipoq Ehpasdwvsg Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, machine/vehicle number: 007699, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Dolipevap Ekedwvecg Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2014, Feed Speed: 8-18m/min Feed Speed with Corner Rounding: 14m/min WorkPiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material strips: 0.4-12mm Extension of Infeed fence 300mm PU Rollers Joint Trimming 2x2.2Kw Workpiece Pre-Heating Airtec Unit Quickmelt Application Unit End Trim Chamfer / Straight with pneumatic adjustment Multi Trimming MS 40 Unit (2 profiles) with multiple roller sensing Multifunctional Contour Trimming Profile Scraping MZ 40 (2 profiles) with multiple roller sensing Glue Joint Scraper Buffing Unit Separating agent Spray Device Lubricant Spray Unit Detergent Spraying Unit Automatic Edge Infeed Device Djlipdwewgldnjvscg Power Touch Control System Homag TFU140

Condition: used, Year of construction: 2013, total length: 3,800 mm, total height: 1,500 mm, total width: 1,000 mm, Weight: 1.500 kg Price: On request - Year: 2013 - Documentation available: No - CE mark available: Yes - Serial number: 230 - Voltage [V]: 400 - Power [kW]: 10.0 Dslipdjwh Ai Dowvscg - Transport dimensions: 3800mm x 1000mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 1991, Used machine Year of construction 1991 Equipment and technical data: Edge banding machine for pre-coated edge material High-performance hot air blower Electromagnetic roller cutter Hebrock system edge trimmer End trimming: Trimming module for flush cutting the front edge overhang edge overhang Feed: 3-roller system Delivery on both sides Attachment trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 170 mm min. Workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for operation: approx. 1 minute Dimensions 1730 x 690 x1240 mm Dcelipdevimxgswvog Weight approx. 115 kg Availability: short term Storage location: Hochheim

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit Dslipdsu R Sy Aswvscg - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Dcjlipsvwkrgodwvog Stock no: 2002414BXM

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Dcjlioqy Em Topdwvsg Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: excellent (used), Year of construction: 2001, For edgebanding of irregular shaped parts. Dcjlipdowga Uhowvog

Condition: used, Motor power: 9.5 HP (7.0 kW), motor frequency: 50 Hz, chain conveyor, glue heating, pressure roller, combination trimming units, pressure beam adjustment, impact shears, glue roller, Attention: Edge feed out of function, as well as both snipping units, edge has overhang at the front and rear, which must then be worked in manually Dcolipdwswhb Tzeveg

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Dcjlipewhuipjdwvog Technical data Workpiece length at least 210 mmEdge thickness 0.4 mm – 2 mmMotor voltage 3 x 400 VWorkpiece width at least 95 mmWorkpiece thickness10 mm – 45 mm Joining unit application-controlled – can be switched off Continuous edge feed via support plate Edge feed for roll materials from 0.4–2 mm thickness, strip edge banding with individual feed Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate) Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller Gun shear unit with 2 cutting knives for end cutting Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges Tooling for radius 2 mm Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections Polishing unit, 2 motors, 1400 rpm, 900 W Control panel with LCD display and keypad Workpiece transport via chain conveyor Feed speed 7 m/min (~ 250lfm/h) Extendable workpiece support Optional equipment Surface scraper, can be switched on mechanically Spray device for cleaning agent on polishing unit (!21/!30A) with infrared heating lamp for preheating the panel edge Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2024, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg Delijl D Rx Uopdwvscg

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Dcslipeq H Spvodwvjg Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: used, machine/vehicle number: 005832, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Djlipsiiiyhodwvecg Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw Dcslipdwsvymfbevjg With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Dcslipdjq Ihxpewvsg Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: used, machine/vehicle number: 005793, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Dolishwkafopdwvecg Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Condition: workshop overhauled, well maintained Equipment and technical specifications: - CE mark - Working height 8-60 mm - Glue thickness 0.4-12 mm - Rotating control panel with "StarTouch" PLC line control, 12" color touchscreen including "Telesolve" remote maintenance and diagnostics - Anti-adhesive spray unit in front of the milling unit - Pre-milling/joining unit "RT-E" with 2 high-frequency motors, DIA cutters, and "EASY-SIZE PLUS" device (electronically controlled infeed guide) - Glue unit "VC 1000" up to 12 mm thickness with pre-melter (replaceable rapid heating tank, Teflon coating, with second glue tank for PUR glue) - Nitrogen storage box for PUR glue tank, fill level monitoring with sensor, "iGlue" kit for control Glue container above the desk - Cross-cut saw unit "K/SEL" with horizontal adjustment, two independent high-frequency motors, pivoting with tracer rollers and extraction hoods on both motors (controllable from the desk) - Tiltable flush trimming unit "RI/1000" 0-20° tiltable, pneumatic positioning, two independent high-frequency motors, high-performance extraction hood "ED-SYSTEM" (controllable from the desk) - Rounding unit/corner rounding unit "ROUND K" with "4 Edge" KIT, pneumatic positioning from the desk for quick edge thickness changes, two high-frequency motors, tracer rollers, unit runs on prism guides with ball-bearing pressure pads, R=2.5 mm - Scraper unit "RAS/V" with tracer rollers, R=2 mm - Sprayer for finishing, in front of the flat scraper and brushing unit - Flat scraper "RCL", tracer rollers, blower nozzles for cleaning Pneumatically controlled - "SPN" brush/buffing unit, 2 independent motors Djlewhuldjipdwvjcg - Whitening unit/Leister hot air gun, with nozzles at the top and bottom - "AUTOSET" function, all necessary adjustments can be made from the control panel, pivoting of the miter saw blades, remote adjustment of the flush trimming units, 2 positions for the ROUND K unit, remote adjustment for the scraper unit, spacers on the infeed guide, electronic positioning of the upper pressure beam, electronic positioning of the pressure rollers, interior lighting of the cabin, all tools with reversible inserts, edge monitoring sensor, all important units are application-controlled, automatic central lubrication of the feed chain - Former list price: €104,250 Location: Langen Availability: Short term

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Dcolipju Racxodwvsg Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Year of construction: 1995, Condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Dslipoib H Slodwvjcg Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM